Abstract:A polyoxymethylene/graphene nanocomposite is fabricated. Graphene is modified using liquid‐phase exfoliation and KH‐550. Enhanced tribomechanical behavior is achieved with 0.5 wt% graphene, ameliorated load transfer and lubricious transfer film on the interface. In this study, a viable route to the development of a high‐performance polyoxymethylene (POM)‐based nanocomposite is proposed to overcome tribomechanical‐related issues in high‐precision sliding parts. Prior to melt‐blending, graphene nanoplatelet (GNP) filler was processed via a series of liquid‐phase exfoliation and surface modification with 3‐aminopropyltriethoxysilane. Results indicate that GNP is successfully exfoliated with minimum defect ratio and improves interfacial bonding within the matrix. Uniform dispersion and stable load‐transfer capability of POM/GNP with 0.5 wt% loading significantly enhanced flexural, tensile and impact strength by overall 26.4%, in contrast to unfilled POM. Dry friction tests against a steel ball also showed the lowest reduction in friction coefficient and wear rate by 22% and 40.6%, respectively, at the same amount of GNP loading due to the large specific surface coverage and lubricious transfer film chelation onto the steel counterface. Furthermore, dissipated energy accumulation by friction work was calculated in the sliding interfaces based on friction force–displacement hysteresis loop where the POM/GNP 0.5 wt% wear surface consumed ca 21.7% less energy in a dry frictional shearing process compared to neat POM. However, lack or excess loading of processed GNP exhibited insufficient or poor matrix–filler adhesion and led to deterioration of the composite properties due to particle agglomeration which can cause stress concentration and serve as a failure site. The adoption of the proposed methodology would demonstrate excellent material characteristics in thin‐walled precision parts where both mechanical and tribological performances are the primary concern. © 2024 Society of Chemical Industry.

Graphene stripping, a convenient and environmentally friendly technology for the preparation of polyurethane/graphene nanocomposites as a new type of highly wear‐resistant materials

Tribological properties of graphene-reinforced polyurethane bearing material

Mechanochemical functionality of graphene additives in ultralow wear polytetrafluoroethylene composites

The reinforcement of polyurethane by mini-sized graphene with superior performances

Preparation of Functionalized Graphene/thermal Conductive Polyurethane Films

High erosion resistance thermoplastic polyurethanes composites fabricated via intercalation reinforced interfacial interaction

Mechanical Properties and Wear Resistance of Sulfonated Graphene/Waterborne Polyurethane Composites Prepared by In Situ Method

Morphology, Mechanical and Thermal Properties of Thermoplastic Polyurethane Containing Reduced Graphene Oxide and Graphene Nanoplatelets

Superior wear resistance of epoxy composite with highly dispersed graphene spheres

Preparation and characterization of a graphene hybridizing polyurethane damping composite

Functionalized Graphene from Electrochemical Exfoliation for Thermoplastic Polyurethane: Thermal Stability, Mechanical Properties, and Flame Retardancy

Wear-Resistant Graphene–Silicone Rubber Composites

Tribological and mechanical endowments of polyoxymethylene by liquid‐phase exfoliated graphene nanofiller

Modified Graphene/Polyimide Nanocomposites: Reinforcing And Tribological Effects

An Infiltration Method to Synthesize Thermoplastic Polyurethane Composites Based on Size-Controlled Graphene Foams

Extreme pressure and anti-wear properties of polycarboxylate superplasticizer modified 3D porous graphene/SiO 2 as water-based lubricant additives

Wear Performance and Mechanisms of Polyphenylene Sulfide/Polytetrafluoroethylene Wax Composite Coatings Reinforced by Graphene

Tribological Behaviour of POM Reinforced by Graphene and PTFE

In Situ Polymerization of Graphene Nanosheets and Polyurethane with Enhanced Mechanical and Thermal Properties

Tribological evaluation of thermoplastic polyurethane-based bearing materials under water lubrication: Effect of load, sliding speed, and temperature

Thermal, Mechanical, And Morphological Properties Of Functionalized Graphene-Reinforced Bio-Based Polyurethane Nanocomposites