Abstract:The Leighton dish formerly at the Caltech Submillimeter Observatory will be reassembled to become the Leighton Chajnantor Telescope (LCT). It will be required to demonstrate high surface accuracy and controlled radiation patterns at high frequency, which are largely limited by surface error due to panel misalignment on the primary reflector. Not only the surface rms error but also the error distribution has effect on the radiation pattern of the antenna. Therefore, analyzing the effect of error distributions resulting from various panel misalignments on the radiation pattern of the antenna will facilitate better compensation of surface errors during the reassembly process. To acquire the radiation pattern of LCT's antenna with panel misalignments, we first propose a simulation method based on physical optics and the physical theory of diffraction, which offers precise results but is time-consuming, especially at high frequencies. Then, we propose a rapid computation method that combines the method of calculating the optical path difference (OPD), the OPD fitting method, and the aperture integration method for segmented reflectors. Experimental results demonstrate that the rapid computation method is highly efficient and accurate compared to the simulation method. In order to show the effect of error distributions due to two typical panel misalignments (i.e., piston and tip-tilt) on radiation patterns, experiments are conducted using the two proposed methods for various error distributions. These experiments indicate that for the same surface rms error, smaller panel errors at smaller normalized aperture radii are more conducive to achieving improved characteristics of the radiation patterns, such as reduced peak gain losses and lower sidelobe levels. Additionally, comparison experiments also reveal that variations in piston error have a greater impact on the radiation patterns than variations in tip-tilt error under the same surface rms error.

Synthesized modeling and active disturbance rejection control for the Leighton Chajnantor Telescope

Precise and Efficient Pointing Control of a 2.5-m-Wide Field Survey Telescope Using ADRC and Nonlinear Disturbance Observer

Far-field Pattern Analysis Based on Piecewise Aperture Field Integration for Leighton Chajnantor Telescope Antenna under Gravity and Wind Load

Dynamic Modeling and Robust Control for Slant-Axis Telescope

A New LHe-free Cryostat for the Heterodyne SIS Receiver for the Leighton Chajnantor Telescope

An Active Surface Upgrade For The Delingha 13.7-M Radio Telescope

Effect of Panel Misalignment Error Distribution on the Radiation Pattern of Leighton Chajnantor Telescope's Antenna

Design and Implementation of a Portable Laser Calibration System for LHAASO-WFCTA

Active disturbance rejection control for spacecraft relative motion in libration point orbits subject to actuator saturation and time-delays

Enhanced disturbance observer-based hybrid cascade active disturbance rejection control design for high-precise tracking system in application to aerospace satellite

Multi-Channel Phase-Compensated Active Disturbance Rejection Control with an Improved Backstepping Strategy for Electro-Optical Tracking Systems

Active Disturbance Rejection with Fast Terminal Sliding Mode Control for a Lower Limb Exoskeleton in Swing Phase.

Active Disturbance Rejection Controller for Loitering Unit with Parameter Uncertainty

Tracking Control of Wheeled Mobile Robots with Slippage Based on Active Disturbance Rejection Control

Research on High-Stability Composite Control Methods for Telescope Pointing Systems under Multiple Disturbances

Integrated modeling and analysis of the microvibration effects on the line-of-sight stability for the space laser communication terminal

Real-time Closed-loop Active Surface Technology of a Large Radio Telescope

Dynamic modeling of the Stewart platform for the NanShan Radio Telescope

The Experimental Study of Active Surface System for the Large-Aperture, High-Accuracy Radio Telescope

Active disturbance rejection vibration control for an all-clamped piezoelectric plate with delay

Trajectory Tracking Control of WMRs with Lateral and Longitudinal Slippage Based on Active Disturbance Rejection Control.