Abstract:To optimise copper (Cu) leaching, this study investigated Cu behaviour during a two-stage oxygen pressure leaching process of zinc sulfide concentrate (ZnS). The results indicated that maintaining low temperature, low sulfuric acid (H 2 SO 4 ) concentration, and low oxygen partial pressure during the first stage of leaching the reduction of ferric iron (Fe 3+ ) by ZnS and the weak leaching of Cu. In the second stage, increasing the temperature, H 2 SO 4 concentration, and oxygen partial pressure enabled efficient Cu leaching while converting iron (Fe) back to Fe 3+ and returning it to the first stage. This two-stage process effectively mitigated Fe hydrolysis precipitation, resulting in a small residue yield and preventing Cu incorporation into jarosite. Cyclic validation experiments were conducted under optimum experimental conditions with a residue yield of 36.1%, the dissolution rates of Zn, Cu, and Fe impurity of 98.76%, 91.65%, and 81.05%, and the Zn, Cu, and silver (Ag) contents of leaching residue were 1.61%, 0.17%, and 0.524%, respectively. The primary phases in the leach residue included lead (Pb) sulfate, sulfur, and pyrite. This approach allowed for deep leaching of Zn and Cu as well as achieving efficient Pb and Ag enrichment. Afin d'optimiser la lixiviation du cuivre (Cu), cette étude a examiné le comportement du Cu au cours d'un procédé de lixiviation sous pression d'oxygène en deux étapes d'un concentré de sulfure de zinc (ZnS). Les résultats ont indiqué que le maintien d'une basse température, d'une faible concentration d'acide sulfurique (H 2 SO 4 ) et d'une pression partielle basse d'oxygène pendant la première étape de lixiviation, a facilité la réduction du fer ferrique (Fe 3+ ) par le ZnS et la lixiviation faible du Cu. Dans la deuxième étape, l'augmentation de la température, de la concentration en H 2 SO 4 et de la pression partielle d'oxygène a permis une lixiviation efficace du Cu tout en reconvertissant le fer (Fe) en Fe 3+ et en le retournant à la première étape. Ce procédé en deux étapes a effectivement atténué la précipitation d'hydrolyse du Fe, entraînant un faible rendement en résidus et empêchant l'incorporation du Cu dans la jarosite. On a réalisé des expériences de validation cycliques dans des conditions expérimentales optimales avec un rendement de résidus de 36.1%, et des taux de dissolution des impuretés de Zn, de Cu et de Fe de 98.76%, 91.65% et 81.05%. Les teneurs en Zn, Cu et argent (Ag) du résidu de lixiviation étaient respectivement de 1.61%, 0.17% et 0.524%. Les phases primaires dans le résidu de lixiviation incluaient le sulfate de plomb (Pb), le soufre et la pyrite. Cette approche a permis une lixiviation en profondeur du Zn et du Cu ainsi que l'obtention d'un enrichissement efficace en Pb et en Ag.

Sulfuric Acid Baking and Fe(III)-Cl - -H 2 SO 4 Leaching Behavior of Ni- and Cu-Containing Sulfide and Silicate Rich Suhanko Concentrate

Surface processes at a polymetallic (Mn-Fe-Pb) sulfide subject to cyanide leaching under sonication conditions and with an alkaline pretreatment: Understanding differences in silver extraction with X-ray photoelectron spectroscopy (XPS)

Structure and properties of MgAlCuFe complex oxide for FCC desulfurization: effect of Fe and Cu contents

Characteristics of Leaching of Nickel from a Mafic Overburden in Sulfuric Acid and Sodium Chloride Medium at Atmospheric Pressure

Effect of substrate on bioleaching of Cu,Zn from sewage sludge

Synthesis, characterization and evaluation of Cu/MgAlFe as novel transfer catalyst for SOx removal

Bioleaching of a complex Co-Ni-Cu sulfide flotation concentrate by Bacillus megaterium QM B1551 at neutral pH

Recovery of "pure" CuS nanoparticles using biogenic H 2 S from a bioleach liquor

Influence of the Chemical Composition of MgAlFeCu Mixed Oxides As Catalysts for SO2Removal

Selective extraction performance of Ni, Cu, Co, and Mn adopted by a coupled leaching of low-grade Ni-sulfide ore and polymetallic Mn-oxide ore in sulphuric acid solutions

Chalcopyrite Leaching in Ferric Sulphate: The Effect of Fe3O4-CuFeS2 Galvanic Couple on the Cu Dissolution

Investigation of leaching of nickel sulfide flotation tailings to recover valuable metals

Nitric Acid Dissolution of Tennantite, Chalcopyrite and Sphalerite in the Presence of Fe (III) Ions and FeS2

Leaching Kinetics And Mechanism Of Laterite With Nh4cl-Hcl Solution

Modification of Structural-Textural Properties of Sulfide Minerals at Polymetallic Concentrate Leaching with Sulfuric Acid and Hydrogen Peroxide Solutions

Quantitative characterization of secondary copper flue dust and guidance for separating valuable and toxic elements via low-temperature roasting and selective leaching

Simultaneous dissolution of nickel, copper and cobalt from low grade nickel matte by (NH4)2S2O8-H2SO4 oxidative leaching

Copper Extraction from Oxide Ore of Almalyk Mine by H2SO4 in Simulated Heap Leaching: Effect of Particle Size and Acid Concentration

Extraction of Cu and Ni from Low-Ni Matte by a Combined Chemical Precipitation and Molten Salt Electrolysis Approach

Recovery of Pure Co(II) and Ni(II) Solutions from Synthetic Sulfate Leach Liquor of Laterite Ores by Precipitation and Solvent Extraction

Copper leaching behaviour during oxygen pressure leaching of zinc sulfide concentrate