Abstract:Using statistical analysis from the characterized ply stack orientation using an ultrasonic inspection, the uncertainty of the as manufactured failure envelope can be generated. This article presents the uncertainty of the part performance due to the estimated ply orientations of a carbon fiber laminate inspected using ultrasound inspection. Recent developments to quantify the orientation using ultrasound inspection is accurate to within ±2° for each lamina. The research presented in the current work statistically analyzes the impact this uncertainty in measurement has on the resulting expected failure envelope using two different analytical methods: (1) Monte‐Carlo (MC) simulation approach extending classical laminate theory and (2) Closed form approach of Mean Value First Order Second Moment method based on derivatives of failure envelope as a function of lamina orientation. The results are validated against a commercial finite element‐based MC simulation approach. The Tsai‐Wu failure criteria is implemented to determine the first ply failure stresses by applying a variety of planer loads to form the failure envelope for a given layup sequence of a carbon fiber reinforced polymer laminate. In this article, using stochastic simulations, the failure envelope is no longer deterministic but is stochastic in nature and converts the reporting from a deterministic factor of safety concept to a probability of failure for a given loading state. The analysis is visualized and quantified using the cumulative‐density‐function (CDF), which demonstrates the similarity between the stochastic results and the classical deterministic approach. To demonstrate a possible end use of the presented statistical analysis, a study of a woven composite laminate is presented where the ply orientation is estimated using ultrasound and the resulting CDF of failure is presented. Highlights Statistical analysis (Monte‐Carlo, mean value, first order, second moment) on the ply orientation variability via ultrasound inspection. Statistical analysis of classical laminate theory and FE based Tsai‐Wu failure model is developed and compared. Tsai‐Wu failure envelope is quantified and visualized using cumulative density function.

Predictive analysis of tensile strength ratios in laminated bamboo composites: Unraveling the stochastic impact of ply angle variations through machine learning model

Mechanical Behavior of Glued Laminated Bamboo Moment-Resisting Connections

The Off-Axis Embedment Performance of Bamboo Panels Used for Glubam Structures

Experimental Investigation and Evaluation of Metal-Plate-connected Laminated Bamboo Lumber Joints

The Flexural Behavior of Cross Laminated Bamboo and Timber (CLBT) and Cross Laminated Timber (CLT) Beams

An Experimental Study on Shear Strength of Glubam

A statistical approach for failure analysis involving uncertainty in determining ply orientation

Anisotropy Attenuation of Reconstituted Bamboo Lumber by Orthogonal Layup Process

Cyclic behavior of laminated bio-based connections with slotted-in steel plates: Genetic algorithm, deterministic neural network-based model parameter identification, and uncertainty quantification

Preface for Special Issue ‘composites Communications’: Additive Manufacturing of Advanced Composites

Characterizing engineering performance of bamboo-wood composite cross-laminated timber made from bamboo mat-curtain panel and hem-fir lumber

Evaluation of the dowel-bearing properties and failure modes of engineering-use laminated flattened-bamboo composite by experimental study and micro-analysis

Anisotropic Mechanical Properties and Composite Model of Parallel Bamboo Strand Lumbers

Axial load-deformation behavior and fracture characteristics of bolted steel to laminated timber and glubam connections

Modeling Progressive Damage and Failure of Single-Lap Thin-Ply-Laminated Composite-Bolted Joint Using LaRC Failure Criterion

Numerical Analysis of Laminated Veneer Lumber Beams Strengthened with Various Carbon Composites

Metamodeling-assisted probabilistic first ply failure analysis of laminated composite plates—RS-HDMR- and GPR-based approach

Experimental Analysis of Nailed LBL-to-LBL Connections Loaded Parallel to Grain

Failure Modes and Strength Prediction of Thin Ply CFRP Angle-Ply Laminates

Structural performance of laminated-bamboo lumber nailed connection

Parallel-to-grain tensile mechanical behavior of laminated bamboo lumber for bolted connections