Abstract:By synergizing the DFT approach with SCAPS‐1D simulations, this study comprehensively elucidates the optoelectronic and photovoltaic attributes of Cs2TiBr6‐based perovskite solar cells. 40 configurations involving various ETLs and HTLs are explored, among them, a notable efficiency of 24.82% is achieved for the device architecture ITO/LBSO/Cs2TiBr6/CNTS/Au. This work aspires to positively steer sustainable PV advancement. In recent times, the remarkable advancements achieved in the field of perovskite solar cells (PSCs) have sparked significant research efforts aimed at enhancing their overall performance because of their exceptional optoelectronic properties. Due to the toxicity of lead (Pb), the emergence of Ti‐based (Cs2TiBr6) double‐halide PSCs is regarded as a good alternative to Pb‐based PSCs. Here, density functional theory (DFT) calculations are performed to examine the prospect of Cs2TiBr6 perovskite as a layer of absorber for photovoltaic cells (SCs). These computations looked at the material's structural, optical, and electrical characteristics. The density of states (DOS) results demonstrate strong conductivity, principally provided by the 4p states of Br, whilst Ti‐3d and Cs‐5p orbital electrons offer insignificant contributions. The electronic band structure discloses a direct band gap of 1.534 eV. The covalent connections that exist between Ti and Br atoms and the robust electronic charge density around the Ti atom both demonstrate a significant buildup of electronic charge along the 100 planes. The dielectric function and the coefficient of absorption have significance irrespective of lower energies because it is extremely valuable for solar energy applications. The UV absorption peaks of Cs2TiBr6 have a maximum of ≈15.51 eV and are magnified with photon energy up to 2.46 eV, indicating that it may have potential for solar applications. This work also investigated a good combination of the hole transport layer (HTL) and electron transport layer (ETL) with the Cs2TiBr6 absorber layer. AZnO, Nb2O5, LBSO, and Zn2SnO4 are executed as the ETLs, and MoO3, CuAlO2, MEH‐PPV, ZnTe, CNTS, GaAs, MoS2, PTAA, Cu2Te, Zn3P2 are considered as the HTLs to identify the best HTL/Cs2TiBr6/ETL combinations using the SCAPS‐1D numerical simulation. Among all configurations, ITO/LBSO/Cs2TiBr6/CNTS/Au is examined as the best‐optimized structure of Ti‐based PSC, with JSC of 26.63 mA cm−2, a VOC of 1.123 V, FF of 82.94%, and a power conversion efficiency of 24.82%. To validate the findings, PV parameters like the effect of generation rate, recombination rate, J−V, and Q‐E characteristics are evaluated. The effect of series and shunt resistance and structure working temperature are explored to observe the effect of these on PSC devices. The accomplished outcomes suggest that Cs2TiBr6 can be viewed as an optimistic material for PSCs for its higher stability and environment‐friendly characteristics.

Probing the Impact of Four BSF Layers on MASnI3‐Based Lead‐Free Perovskite Solar Cells for >33% Efficiency

High Performance Inverted RbCsFAPbI3 Perovskite Solar Cells Based on Interface Engineering and Defects Passivation.

An extensive study on multiple ETL and HTL layers to design and simulation of high-performance lead-free CsSnCl3-based perovskite solar cells

Analysis of Lead Free CsSnBr3 based Perovskite Solar cells utilizing Numerical Modeling

Design and performance optimization of a novel tri-layer unleaded all inorganic lead-free mixed halide CsSnI 3-x Br x heterojunction solar cell

Performance evaluation of inorganic Cs 3 Bi 2 I 9 -based perovskite solar cells with BaSnO 3 charge transport layer

Design and simulation of CsPb.625Zn.375IBr2-based perovskite solar cells with different charge transport layers for efficiency enhancement

CHTS/Zn2P3-based solar cells with enhanced efficiency through ETL engineering: A numerical study

Improving the perovskite solar cell by insertion of methyl ammonium tin oxide and cesium tin chloride as absorber layers: scaps 1d study based on experimental studies

Investigation of Back Surface Field Layer for High Efficiency Ultrathin In2S3 based CIGS Solar Cell

An In‐Depth Investigation of the Combined Optoelectronic and Photovoltaic Properties of Lead‐Free Cs2AgBiBr6 Double Perovskite Solar Cells Using DFT and SCAPS‐1D Frameworks

Optimization of the architecture of lead-free CsSnCl3-perovskite solar cells for enhancement of efficiency: A combination of SCAPS-1D and wxAMPS study

A comprehensive study of the optimization and comparison of cesium halide perovskite solar cells using ZnO and Cu2FeSnS4 as charge transport layers

Effect of various electron and hole transport layers on the performance of CsPbI3-based perovskite solar cells: A numerical investigation in DFT, SCAPS-1D, and wxAMPS frameworks

Design and simulation of a new kesterite solar cell structure with and without a perovskite Back Surface Field layer to exceed 32% efficiency

Numerical simulation and performance optimization of a lead-free inorganic perovskite solar cell using SCAPS-1D

Numerical Simulation of Highly Efficient Cs2TiI6 based Pb Free Perovskites Solar Cell with the Help of Optimized ETL and HTL Using SCAPS-1D Software

Combined DFT, SCAPS-1D, and wxAMPS frameworks for design optimization of efficient Cs2BiAgI6-based perovskite solar cells with different charge transport layers

Simulation‐Based Performance Analysis of Lead‐Free Bismuth Perovskite Solar Cells: A Comparative Study of Cs3Bi2I9 and (CH3NH3)3Bi2I9 ‐based Perovskite Solar Cells

Utilizing Density Functional Theory and SCAPS Simulations for Modeling High‐Performance MASnI3‐Based Perovskite Solar Cells

Exploring the Optoelectronic and Photovoltaic Characteristics of Lead‐Free Cs2TiBr6 Double Perovskite Solar Cells: A DFT and SCAPS‐1D Investigations