Abstract:In this work, to solve the problem of pipeline blockage caused by the accumulation of hydrate particles and wax particles and to explore the interaction characteristics of adhesive force between gas hydrate particles and wax particles as well as droplets, a high-pressure triaxial mobile device was used to measure the adhesion strength between cyclopentane hydrate particles and different commonly seen phases in the pipeline, including cyclopentane hydrate particles themselves, liquid droplets, and wax crystal particles. These experiments were conducted at different temperatures. The results showed that the adhesion between hydrate and wax particles was decreased with the increase in temperature; this is because the wax is amorphous, the heat absorbed when the temperature rises only increases its average kinetic energy, and the stronger the kinetic energy, the lower its viscosity, resulting in reduced adhesion between particles. Meanwhile, this adhesion was also affected by the concentration of wax. As the wax concentration increased from 1 to 5.32 wt % and then to 8.14 wt %, the adhesion between hydrate and wax particles was first decreased and then increased. This was because when the wax crystal concentration was below 5 wt %, a higher wax molecule concentration meant a more hydrophobic surface, which restricted the formation of a capillary liquid bridge between particles and thus reduced the interforce between wax crystal particles and hydrate particles. When the wax crystal concentration was between 5 and 8 wt %, the change of hydrophobicity was no longer the dominating factor, the increase in wax concentration blocked the hydrate molecular diffusion path, which caused a higher hydrate viscosity, therefore leading to a decreased hydrate molecular diffusion rate and a reduced conversion rate of the liquid bridge in hydrates, the lower conversion rate could subsequently lead to the increasing size of micropores in the hydrate shell, and adhesion between particles was increased.

What problem does this paper attempt to address?

The problem that this paper attempts to solve is the blockage problem in pipelines due to the accumulation of hydrate particles and wax particles. Specifically, the research aims to explore the adhesion characteristics between gas hydrate particles, wax particles and droplets. By using a high - pressure triaxial mobile device to measure the adhesion strength between cyclopentane hydrate particles and different common phases (including cyclopentane hydrate particles themselves, droplets and wax grains), and conducting experiments at different temperatures, the researchers hope to understand how these adhesion forces change with temperature and the influence of wax concentration on these adhesion forces. These issues are of great significance for understanding and controlling the generation mechanism of hydrate and wax deposits in pipelines during the development of deep - sea oil and gas fields and ensuring the normal operation of pipelines. The research found that as the temperature increases, the adhesion force between hydrates and wax particles decreases. This is because wax is amorphous, and the heat absorbed when the temperature rises only increases its average kinetic energy. The stronger the kinetic energy, the lower its viscosity, thereby reducing the adhesion force between particles. In addition, the concentration of wax also affects this adhesion force. When the wax concentration increases from 1% to 5.32% and then to 8.14%, the adhesion force between hydrates and wax particles first decreases and then increases. This is mainly because when the wax crystal concentration is lower than 5%, a higher wax molecule concentration means a more hydrophobic surface, which limits the formation of capillary liquid bridges between particles, thereby reducing the interaction force between wax grains and hydrate particles. When the wax crystal concentration is between 5% and 8%, the change in hydrophobicity is no longer the dominant factor. The increase in wax concentration blocks the diffusion path of hydrate molecules, resulting in an increase in the viscosity of hydrates, which in turn reduces the diffusion rate of hydrate molecules and the conversion rate of liquid bridges in hydrates. The lower conversion rate then leads to an increase in the micropore size in the hydrate shell, and the adhesion force between particles also increases. These findings are of great theoretical and practical significance for preventing and solving the blockage problems in oil and gas transportation pipelines.

Study on the Adhesion Force between Wax Crystal Particles and Hydrate Particles

Effect of Wax on Cohesive Behavior of Gas Hydrate under High Pressure

Evolution of morphology and cohesive force of hydrate particles in the presence/absence of wax

Kinetic Properties of CO 2 Hydrate Formation in the Wax-Containing System at Different Concentrations

Kinetic and rheological investigation of cyclopentane hydrate formation in waxy water-in-oil emulsions

Mechanistic Study on the Influence of Wax on Hydrate Formation Process

Investigation on Synergistic Deposition of Wax and Hydrates in Waxy Water-in-Oil (W/O) Flow Systems

Investigation on coupling deposition and plugging of hydrate and wax in gas–liquid annular flow: Experiments and mechanism

Effects of wax on CH4 hydrate formation and agglomeration in oil–water emulsions

Investigating hydrate formation and flow properties in water-oil flow systems in the presence of wax

Experimental study of methane hydrate formation and agglomeration in waxy oil-in-water emulsions

Rheological study of low wax content hydrate slurries considering phase interactions

Investigation on the Influence of Different Coating Surfaces on the Adhesive Force of Hydrate Particles

Molecular dynamics simulation to explore the impact of wax crystal on the formation of methane hydrate

Study on the mixed deposition rate and phase transition thermodynamic parameters of crude oil wax crystals and hydrates

Molecular Dynamics Simulation of Waxy Crude Oil Multiphase System Depositing and Sticking on Pipeline Inner Walls and the Micro Influence Mechanism of Surface Physical–Chemical Characteristics

Experimental Study on the Effect of Wax Crystal-Water Droplet Aggregations on Wax Deposition of Water-in-Oil Emulsions

The Adhesion Strength of Semi-Clathrate Hydrate to Different Solid Surfaces

Unraveling Adhesion Strength between Gas Hydrate and Solid Surfaces

Probing the interaction between asphaltene-wax and its effects on the crystallization behavior of waxes in heavy oil via molecular dynamics simulation

Combined Dry and Wet Adhesion Between a Particle and an Elastic Substrate.