Abstract:Journal of Applied Physics, Volume 131, Issue 17, May 2022. In this study, to comprehensively reveal the damage mechanisms of NiTi alloys, molecular dynamics (MD) simulations were applied to examine the void evolution process under uniaxial and triaxial intensive dynamic loading. A single-crystal model was first used in the MD simulations. The calculation results revealed that the single-crystal NiTi model exhibited a similar damage response to brittle fracture. The corresponding damage mechanism was the rapid growth and coalescence of voids inside the material. Meanwhile, the defect influence was also examined for the single-crystal model, and the reduction effect of the ultimate stress value due to the stress concentration was analyzed quantitatively by the MD simulations. In addition, a polycrystalline model of NiTi was used in the MD simulations. Compared with the single-crystal model, the polycrystalline model showed an evident plastic stage under uniaxial loading due to dislocation slip. The MD simulation proved that the dislocations accumulated on the grain boundaries, which led to a stress concentration effect on the grain boundaries and sequentially resulted in void generation. However, the propagation and coalescence of voids were hindered by the grain interactions, which resulted in a ductile damage behavior inside the material. Based on this mechanism, the grain size influence was also studied in the MD simulations. It was discovered that the grain size effect in the damage stage resulted in a damage ductility enhancement with the decrease in the average grain size value. Finally, based on the relationships between the stress-strain curve, void fraction, and damage behavior, novel constitutive and state equations were proposed with damage terms to consider the void evolution process during the damage stage. The prediction results showed good agreement with the MD simulation data.

Damage mechanisms of a metastable β-titanium alloy with bimodal microstructure revealed by void growth models using synchrotron X-ray microtomography

In-Situ Study on Tensile Deformation and Fracture Mechanisms of Metastable β Titanium Alloy with Equiaxed Microstructure

Three-dimensional investigation of void growth leading to fracture in commercially pure titanium

In-situ Investigation Via High Energy X-ray Diffraction of Stress-Induced(0002)α→(110)β Transformation in a Ti-5.5Mo-7.2Al-4.5Zr-2.6Sn-2.1Cr Alloy

Microstructural morphology effects on fracture toughness and crack growth behaviors in a high strength titanium alloy

Simulation of Intergranular Ductile Cracking in Β Titanium Alloys Based on a Micro-Mechanical Damage Model.

Effect of grain orientation and local strains on void growth and coalescence in titanium

The mechanistic origins of heterogeneous void growth during ductile failure

Microstructure tailoring and impact toughness of a newly developed high strength Ti-5Al-3Mo-3V-2Cr-2Zr-1Nb-1Fe alloy

In-Situ SEM Observation on Fracture Behavior of Titanium Alloys with Different Slow-Diffusing β Stabilizing Elements

Study on the Relationship Between Microstructure and Mechanical Property in a Metastable Β Titanium Alloy

Nonuniform Recrystallization and Growth Behavior of Β Grains Dominated by Grain Misorientation and Interfacial Energy in Metastable Β Titanium Alloy

Investigation of ductile damage in dual phase steel during tensile deformation by in situ X-ray computed tomography

Micro-damage evolution under intensive dynamic loading and its influence on constitutive and state equations for nanocrystalline NiTi alloy through molecular dynamics

Enhanced Mechanical Properties of Ti-5Al-5Mo-5V-3Cr-1Zr by Bimodal Lamellar Precipitate Microstructures Via Two-Step Aging

Exploration of Nano-scale Structural Instabilities in Metastable Β Titanium Alloys Using Advanced Electron Microscopy

Phase Composition Effects on Dynamic Behavior and Strain Rate Sensitivity in Metastable β-Ti Alloys

A multiscale constitutive model for metal forming of dual phase titanium alloys by incorporating inherent deformation and failure mechanisms

Characterization of hot deformation and microstructure evolution of a new metastable β titanium alloy

Unusual plastic deformation and damage features in Titanium: experimental tests and constitutive modeling

Constitutive Model and Microstructure Evolution of Ti65 Titanium Alloy