Abstract:In this paper, the internal friction behaviour of Zr-Ti-Cu-Ni-Be bulk metallic glass (BMG) containing 2 at% Fe at elevated temperatures has been studied in isothermal dynamic mechanical analysis experiments. The experiments lead to the determination of metastable equilibrium internal friction Q(e)(-1), as a function of temperature, which can be well described by the Maxwell model with viscosity eta(T), following a Vogel-Fulcher-Tammann (VFT) relation or Arrehnius law. Comparison with the Zr-Ti-Cu-Ni-Be glass-forming liquid shows that a small addition of Fe results in a stronger liquid behaviour of the alloy, exhibiting a higher strength parameter as well as lower VFT temperature and therefore correlates better glass forming ability and thermal stability. From the isothermal internal friction data, the activation energies for viscous flow and primary crystallization of the Zr based supercooled metallic liquid are also derived. It is found that the former is comparable to the activation energy controlling the diffusion process of atoms, e. g. the Ni element of medium size and higher mobility among the components of this alloy, while the latter to that of atoms, e. g. the Ti element of larger size and lower mobility. Thus, it is proposed that both isothermal viscous flow and primary crystallization of the alloy in the supercooleld liquid region are atom diffusion-controlled processes. However, the dominating atomic species are different from each other in the multicomponent Zr based BMG.

Numerical simulation and experimental verification of large-sized Zr-based bulk metallic glass ring-shaped parts in casting process

The temperature field characteristics and amorphous formation ability during the continuous casting process of Zr-based bulk metallic glass

Finite element simulation and experimental investigation of forming micro-gear with Zr–Cu–Ni–Al bulk metallic glass

Effect of Casting Temperature on the Solidification Process and (micro)structure of Zr-based Metallic Glasses

Determination of Forming Ability of High Pressure Die Casting for Zr-based Metallic Glass

73 Mm-Diameter Bulk Metallic Glass Rod By Copper Mould Casting

Effect of mold temperature on the solidification process and microstructure of Zr-based metallic glasses during casting

Influence of Casting Temperature on the Castability and Glass-Forming Ability of Zr-based Bulk Metallic Glasses

A study of the glass forming ability in ZrNiAl alloys

Extrusion Properties of Bulk Amorphous Alloy Zr_(55)Al_(10)Ni_5Cu_(30)

Formation and mechanical properties of bulk Cu-Ti-Zr-Ni metallic glasses with high glass forming ability

Formation, Thermal Stability and Mechanical Properties of Ti42.5Zr7.5Cu40Ni5Sn5 Bulk Metallic Glass

Influence of Size-Dependent Free Volume Variation and Distribution on the Thermoplastic Flow Behavior of Zr-based Bulk Metallic Glass

Zr-based Bulk Metallic Glass Composite with in Situ Precipitated Nanocrystals

Isothermal internal friction behaviour of a Zr based bulk metallic glass with large supercooled liquid region

Isothermal Extrusion Properties of Zr55Cu30Al10Ni5 Bulk Metallic Glass

Deformation Behavior of Zr-Based Metallic Glass and Microforming of Microgears

Formation, Thermal Stability and Mechanical Properties of Zr-Nb-Cu-Ni-Al Bulk Metallic Glasses

Investigation of Precipitation Phases in As-Cast Wedge Ingot of Bulk Amorphous Zr56.6cu17.3ni12.5al9.6ti4 Alloy

Study on isothermal crystallization kinetics of Zr55.7Cu22.4Ni7.2Al14.7 bulk amorphous alloy

Rapid Viscous Flow of the Supercooled Liquid of Zr-Based Bulk Amorphous Alloy