Abstract:Recycling of spent Li-ion batteries is crucial for achieving sustainable development of battery industry. Current recycling processes mainly focus on valuable metals but less attention has been paid to spent graphite, which generally ends up as secondary waste. In this study, a process for preparing graphene and recovering Li in anode as a by-product from spent graphite was developed. The key point was to re-charge the spent LIBs to generate lithium graphite intercalation compounds. The lithium graphite intercalation compounds were then subjected to a hydrolysis procedure and graphene could be produced through ultrasonic treatment via the expansion/micro-explosion mechanism. Experimental results demonstrated that 1–4 layered graphene could be efficiently produced when spent Li-ion batteries with beyond 50% capacity were re-charged. The prepared graphene showed high quantity containing few defects (ID/IG = 0.33, C/O = 13.2 by energy dispersive spectroscopy and C/O = 8.8 by X-ray photoelectron spectroscopy). In addition, Li was simultaneously recovered in the form of battery-grade lithium carbonate in the above process. Economic analysis indicated that the graphene production cost was extremely low ($540/ton) compared to that of commercial graphene.

What problem does this paper attempt to address?

The main aim of this paper is to address the recycling and reuse of graphite anode materials in discarded lithium-ion batteries (LIBs) and to explore a new method for preparing graphene and recovering lithium. Specifically, the paper addresses the following key issues: 1. **Graphite Recycling and Reuse**: Current recycling technologies for discarded lithium-ion batteries mainly focus on valuable metals, with less attention given to graphite. However, graphite as secondary waste can pose environmental hazards, thus necessitating the development of effective methods for recycling and harmlessly treating discarded graphite anodes. 2. **Low-Cost Production of Graphene**: Graphene has a wide range of applications due to its excellent properties, but current production methods are costly and have certain environmental impacts. Therefore, finding a low-cost, environmentally friendly method for producing graphene is crucial. 3. **Lithium Recovery**: Lithium is an important component of lithium-ion batteries, but its complex distribution in batteries makes efficient recovery a challenge. To address the above issues, the researchers proposed a new method that involves recharging discarded lithium-ion batteries to generate lithium graphite intercalation compounds (Li-GICs), then using a hydrolysis process to obtain graphene from Li-GICs while simultaneously recovering lithium to form battery-grade lithium carbonate. This method not only effectively recycles discarded graphite but also produces high-quality graphene at a lower cost and achieves efficient lithium recovery. Experimental results show that when the capacity retention of discarded lithium-ion batteries exceeds 50%, this method can efficiently produce 1-4 layer graphene with high quality (few defects). Additionally, lithium can also be recovered as battery-grade lithium carbonate. Economic analysis indicates that the production cost of graphene is only $540/ton, which is much lower than the current commercial price of graphene. In summary, this study provides a new approach for the sustainable recycling of discarded lithium-ion batteries, particularly in the high-value utilization of graphite anode materials.

Synthesis of graphene and recovery of lithium from lithiated graphite of spent Li-ion battery

A novel approach to recovery of lithium element and production of holey graphene based on the lithiated graphite of spent lithium ion batteries

Reuse of Spent Industrial Graphite in Batteries by Green Recycling and Interphase Functionalization

Facile Fabrication of High-Performance Li-Ion Battery Carbonaceous Anode from Li-Ion Battery Waste

A method for the preparation of graphene from spent graphite of retired lithium-ion batteries

Recovery and Reuse of Anode Graphite from Spent Lithium-Ion Batteries via Citric Acid Leaching

Re-utilization of waste graphite anode materials from spent lithium-ion batteries

Separation and recovery of graphite from spent lithium-ion batteries for synthesizing micro-expanded sorbents

Low-carbon Upcycling of Spent Anode Graphite: Integrating Graphene and Dislocations for Sustainable Lithium/potassium Storage

Organic acid-assisted vapor phase reduction for high-dense defects of retired graphite for high-performance lithium-ion batteries

Upcycling of Spent Carbon Cathode (SCC) into SCC-2600@rGO Facilitates Ultrastable and Fast Lithium Storage

Graphite recovery from waste Li-ion battery black mass for direct re-use

Opportunity and challenges in recovering and functionalizing anode graphite from spent lithium-ion batteries: A review

An innovative approach to recover anode from spent lithium-ion battery

From spent graphite to recycle graphite anode for high-performance lithium ion batteries and sodium ion batteries

Separation and recovery of carbon powder in anodes from spent lithium-ion batteries to synthesize graphene

Purification of spent graphite and surface modification with amorphous carbons as anodes for high-performance lithium-ion batteries

Critical strategies for recycling process of graphite from spent lithium-ion batteries: A review

Graphite Recycling from Spent Lithium-Ion Batteries for Fabrication of High-Performance Aluminum-Ion Batteries

A green and facile approach for regeneration of graphite from spent lithium ion battery

Renewed graphite for high-performance lithium-ion batteries: catalytic graphitization approach