Abstract:The EU-DEMOnstration fusion power plant (DEMO) first wall protection strategy relies on limiter components to face both normal and off-normal plasma transient events. The heat loads during these events are likely to damage the breeding blanket’s first wall otherwise. Since W is the preferred plasma-facing material for EU-DEMO, the plasma-facing component design of the limiters follows considerations based on heat transfer in solids undergoing phase transition. The understanding of this problem has paved the way for a 1-D thermal modeling in MATLAB Thermal Analysis foR Tracking InterFaces under meLting&vaporizaTion-induced plasma Transient Events (TARTIFL&TTE), which has then been improved and extended to 3-D geometries within a Multiphysics environment. Hence, the 3-D TARTIFL&TTE implementation in COMSOL Multiphysics. Although the validation has already started against some data available in the literature and described in the companion paper, dedicated experiments are performed in the Garching LArge DIvertor Sample Test Facility (GLADIS) for melting studies. Carried out as a joint activity between EUROfusion and U.K. Atomic Energy Authority (UKAEA), the aim of these experiments is generating a traceable and controlled experimental database in support of heat transfer studies in solid components undergoing phase transition. The data are here used in support of the 3-D TARTIFL&TTE validation benchmark. To broaden the database, three different materials are chosen, i.e., TZM, W, and SS-316 grade. The requirements defining the experiments comply with the hypotheses behind 3-D TARTIFL&TTE, for it to be able to reproduce the experiments. Therefore, a uniform heat flux on the loaded surface is provided by the H neutral beam on the footprint, and loading time and heat flux magnitude are chosen such that only melting is reached. This allows the liquid metal to stay in place once formed. No attempts to reach vaporization are made, since the vertical position of the target promotes the molten layer sliding under gravity effects. Measured and modeled results (temperature, absorbed energy, and melt layer depth) show good agreement during the melting phase. As a stepwise benchmark, validation will be also sought under vaporization events. Future work is focused on addressing this last point.

3D Neutronic and Secondary Particles Analysis on YBa $_{2}$ Cu$_{3}$O$_{7-\delta }$ Tapes for Compact Fusion Reactors

Progress of High Heat Flux Component Manufacture and Heat Load Experiments in China

A facility for cryogenic ion irradiation and in situ characterization of rare-earth barium copper oxide superconducting tapes

Neutronics Analysis of the ITER In-Vessel Viewing System

Neutronic Analysis of the Fusion Reactor ARC: Monte Carlo Simulations with the Serpent Code

Two-Dimensional Anisotropic Model of YBCO Coated Conductors

Study on the Applicability of Neutron Radiation Damage Method Used for High-Temperature Superconducting Tape Based on Geant4 and SRIM

Neutronic Assessment of Candidate Materials for TF Coils Shielding in a DEMO Fusion Reactor Based on a DCLL Blanket

Development of a high current density, high temperature superconducting cable for pulsed magnets

Multiscale computational study to predict the irradiation-induced change in engineering properties of fusion reactor materials

Plastic Deformation Simulation of REBCO Tapes Using Particle Methods

Finite element models for radiation effects in nuclear fusion applications

Nuclear analyses for the integration of ITER equatorial Port 2

Experimental study on the an-isotropic critical current of REBCO tape

Laser-heating and Radiance Spectrometry for the Study of Nuclear Materials in Conditions Simulating a Nuclear Power Plant Accident

The magnetic cage

Neutronics simulations for the design of neutron flux monitors in SPARC

A comprehensive screening of plasma-facing materials for nuclear fusion

High Heat Flux Tests in Support of the 3-D Computational Modeling of Melting for the EU-DEMO First Wall Limiters

Radiation transport calculations for the European Spallation Source accelerator environment

ITER full model in MCNP for radiation safety demonstration