Abstract:The electrochemical activation strategy is developed to restore the lost capacity of LiMn2O4 cathode without damaging the battery configuration. The cycle life of the LiMn2O4 cathode is extended from an initial 1500 to an impressive 14 000 cycles at a 5C rate in the system with Li metal as the anode. It is not only facile and cost‐effective, but also highly efficient and compatible with the pouch cell configurations, showing its practical application value. LiMn2O4 spinel is emerging as a promising cathode material for lithium‐ion batteries, largely due to its open framework that facilitates Li+ diffusion and excellent rate performance. However, the charge–discharge cycling of the LiMn2O4 cathode leads to severe structural degradation and rapid capacity decay. Here, an electrochemical activation strategy is introduced, employing a facile galvano‐potentiostatic charging operation, to restore the lost capacity of LiMn2O4 cathode without damaging the battery configuration. With an electrochemical activation strategy, the cycle life of the LiMn2O4 cathode is extended from an initial 1500 to an impressive 14 000 cycles at a 5C rate with Li metal as the anode, while increasing the total discharge energy by ten times. Remarkably, the electrochemical activation enhances the diffusion kinetics of Li+, with the diffusion coefficient experiencing a 37.2% increase. Further investigation reveals that this improvement in capacity and diffusion kinetics results from a transformation of the redox‐inert LiMnO2 rocksalt layer on the surface of degraded cathodes back into active spinel. This transformation is confirmed through electron microscopy and corroborated by density functional theory simulations. Moreover, the viability of this electrochemical activation strategy has been demonstrated in pouch cell configurations with Li metal as the anode, underscoring its potential for broader application.

Structural stabilization of Cr-doped spinel LiMn 2 O 4 for long-term cyclability towards electrochemical lithium recovery in original brine

Reduced Lattice Constant in Al‐Doped LiMn2O4 Nanoparticles for Boosted Electrochemical Lithium Extraction

Improved Li-ion Diffusion and Stability of a LiNi0.5Mn1.5O4 Cathode Through in Situ Co-Doping with Dual-Metal Cations and Incorporation of a Superionic Conductor

Fast and stable lithium extraction enabled by less-defective graphene supported LiMn 2 O 4 conductive networks in hybrid capacitive deionization

Manipulation of Transition Metal Migration via Cr-Doping for Better-Performance Li-Rich, Co-Free Cathodes

Construction of truncated-octahedral LiMn2O4 for battery-like electrochemical lithium recovery from brine

Electrochemical lithium ions pump for lithium recovery from brine by using a surface stability Al2O3–ZrO2 coated LiMn2O4 electrode

Construction of nitrogen-doped carbon cladding LiMn2O4 film electrode with enhanced stability for electrochemically selective extraction of lithium ions

Single Lithium-Ion Conductor Decorated LiMn 2 O 4 with High Selectivity and Stability for Electrochemical Lithium Extraction

Multifunctional AlPO4 reconstructed LiMn2O4 surface for electrochemical lithium extraction from brine

Strengthening Reversibility at High Rate of Spinel LiMn2O4 by Aluminum and Copper Co-doping for Lithium Ion Battery

Go-encapsulated La-doped lithium manganese oxide assemblies to enhance lithium extraction performance in capacitive deionization

Manganese-based spinel adsorbents for lithium recovery from aqueous solutions by electrochemical technique

Construction of porous disc-like lithium manganate for rapid and selective electrochemical lithium extraction from brine

Strengthening Reversibility at High Rate of Spinel LiMn 2 O 4 by Aluminum and Copper Co-doping for Lithium Ion Battery

Al and Cr ions co-doped spinel manganese lithium ion-sieve with enhanced Li + adsorption performance and structural stability

Electrochemical Activation Inducing Rocksalt‐to‐Spinel Transformation for Prolonged Service Life of LiMn2O4 Cathodes

Efficient Lithium Extraction from Brine Using a Three-Dimensional Nanostructured Hybrid Inorganic-Gel Framework Electrode

A long cycle-life high-voltage spinel lithium-ion battery electrode achieved by site-selective doping.

General Synthesis of Single‐Crystal Spinel Cathodes with the Tailored Orientation of Exposed Crystal Planes for Advanced Lithium‐Ion Batteries

Engineering d-p orbital hybridization for high-stable lithium manganate cathode