Abstract:Fourier transform infrared (FTIR) spectroscopy has great potential for on-line analysis of cement raw meal components. As the air humidity on site is not stable due to the complex environment, it will cause interference to the on-line FTIR quantitative analysis of the four key components of Fe2O3, SiO2, CaO, Al2O3 in the raw material samples. In this paper, the online FTIR analyzer for raw meals was used to collect near-infrared spectra of raw meal cement samples under different humidity conditions. The influences of different humidity conditions on near-infrared quantitative analysis were analyzed, and a method of eliminating the background moisture interference was proposed. The specific researches were as follows : (1) Spectra of each 50 samples at two different humidity levels were analyzed. The results were that sample spectra at high humidity level compared to that at low humidity level were similar in shape, while the absorbance intensities were deceased overall and baselines were inclined. These demonstrated that background moisture affected the near-infrared spectra of the samples. (2) Two FTIR quantitative analysis models for samples under high humidity and low humidity conditions were established respectively, and the four component contents of 8 samples in prediction set under another humidity condition were predicted. The results were that the values of the correlation coefficient (r) between the content values of the four components predicted by model under high humidity condition and the standard values in the prediction set were 83. 74%similar to 92. 74% , and the values of the root mean square error (RMSE) were 0. 12 similar to 0. 83. The values of R obtained by model under low humidity condition were 67. 32 %similar to 82. 41% , and the values of RMSE were 0. 12 similar to 0. 84. These indicated that background moisture had affected the FTIR quantitative analysis of raw meal cement components. (3) In order to eliminate the influence of water absorption, the characteristic absorption of background moisture from the measured spectrum were removed refer to the mid-infrared spectroscopy technique. The FTIR quantitative analysis models under high humidity and low humidity conditions were established respectively, and the four components contents of samples in prediction set were predicted by these models. The results were as follows : (1) Under high humidity condition, the prediction accuracy of the model with eliminating moisture absorption was improved compared with model without eliminating moisture absorption, the predicted values of r were 90. 73%0 similar to 97. 76% , and the values of RMSE were 0. 12 similar to 0. 82, (2) Under low humidity condition, the prediction accuracy of model with eliminating moisture absorption was higher than that of model without eliminating moisture absorption, and the predicted values of r were 94. 07% similar to 98. 69% , the values of RMSE were 0. 12 similar to 0. 82, (3) The values of r obtained by models under high and low humidity conditions were above 90%. The experimental results showed that the method could effectively eliminate the influence of moisture absorption on the quantitative analysis model of raw material cement compositions. It provided the theoretical basis and technical support for the online analysis of raw material cement compositions based on FTIR technology.

Rapid determination of moisture content of multi-source solid waste using ATR-FTIR and multiple machine learning methods

Improved Generalization of Spectral Models Associated with Vis-NIR Spectroscopy for Determining the Moisture Content of Different Tea Leaves

Rapid Determination of Componential Contents and Calorific Value of Selected Agricultural Biomass Feedstocks Using Spectroscopic Technology

Textile Solid Waste Recognition with Multiple Material Features

Machine Learning and Hyperspectral Imaging-Aided Forecast for the Share of Biogenic and Fossil Carbon in Solid Waste

Fast Characterization of Biomass and Waste by Infrared Spectra and Machine Learning Models.

A New Method To Rapidly Determine Quality Of Waste Water

Detection of moisture content of particles during drying

Spectral Feature Characterization and Water Content Prediction in Soil Using Different Containers

Rapid Detection of Moisture Content in the Processing of Longjing Tea by Micro-Near-Infrared Spectroscopy and a Portable Colorimeter Based on a Data Fusion Strategy

Rapid Prediction and Visualization of Safe Moisture Content in Alfalfa Seeds Based on Multispectral Imaging Technology

Visual detection of the moisture content of tea leaves with hyperspectral imaging technology

Moisture spectral characteristics and hyperspectral inversion of fly ash-filled reconstructed soil

Interpretable machine learning assisted spectroscopy for fast characterization of biomass and waste

[Research on the Method for Rapid Detection of Soil Moisture Content Using Spectral Data].

Rapid identification of fibers from different waste fabrics using the near-infrared spectroscopy technique

Near Infrared Spectroscopic Modeling Method for Cement Raw Meal Components by Eliminating Background Moisture

A simple method for predicting the lower heating value of municipal solid waste in China based on wet physical composition.

Unveiling the non-linear effects of water and oil on hyperspectral imaging-based characterization of solid waste by hyperspectral unmixing

Prediction of soil organic matter by Kubelka-Munk based airborne hyperspectral moisture removal model

A model transfer strategy based on screening stable wavelength for quantitative analysis of holocellulose and lignin content distribution in pulpwood