Abstract:In the recent times, one of the most crucial tasks related to water resources is the treatment of polluted water. This study reports the development of a functionalized nanofibrous membrane with enhanced filtration performance, heavy metal removal, and photocatalytic dye degradation for the effective treatment of contaminated water. The nanofibrous mats were developed by the process of electrospinning using a polymeric solution of polyacrylonitrile (PAN) reinforced with curcumin-multiwalled carbon nanotube (C-MWCNT) conjugate. The experimental trials for membrane fabrication were adapted based on the design of experiments (DoE) approach by making use of the Box-Behnken design (BBD) for a three-variable system, a component of response surface methodology (RSM). The three variable parameters selected for optimization of the electrospinning process were the dopant concentration (in weight percentage), the flow rate (in millilitre per hour), and the spinning time (in hours), respectively, and a total of 15 fibrous membranes were fabricated. The SEM analysis of the fabricated membranes revealed alterations in the surface morphology of the fibrous mats with variations in the electrospinning parameters. The infrared spectrum of the fibrous mats, validated the incorporation C-MWCNT conjugate in PAN, thereby confirming the formation of PAN/C-MWNCNT membrane. The mean flow pore size and breaking force of the PAN/C-MWCNT membranes was also obtained using a universal testing machine (UTM) and porometer, respectively. To choose the best membrane for efficient filtration experiments, the performance of each of the prepared membranes was assessed in terms of solute rejection percentage (SR%), permeate flux (PF), and pure water flux (PWF). The statistical analysis of the assessed parameters in accordance with the membranes prepared was done using the MINITAB software, and the three-dimensional (3D) surface plots were constructed using the STATISTICA software to visualize and validate the relation between each of the electrospinning parameters and the corresponding membrane performance characteristics. Similarly, the potential of the electrospun membranes for efficient heavy metal ion removal and photocatalysis were also tested independently and the optimal electrospinning parameters were determined for the same. Based on the results, it was observed that the PAN/C-MWCNT membranes could serve as potential candidates for the treatment of polluted water.

Multi-Walled Carbon Nanotubes/Polyacrylonitrile Composite as Novel Semi-Permeable Mixed Matrix Membrane in Reverse Osmosis Water Treatment Process

Mixed-Matrix Membranes for Water Treatment: Materials, Synthesis and Properties

Improving the Performance of Polyamide Reverse Osmosis Membrane by Incorporation of Modified Multi-Walled Carbon Nanotubes

Preparation of high-flux thin film nanocomposite reverse osmosis membranes by incorporating functionalized multi-walled carbon nanotubes

High Flux MWCNTs-interlinked GO Hybrid Membranes Survived in Cross-Flow Filtration for the Treatment of Strontium-Containing Wastewater.

Fabrication of Catalytic Ceramic Nanofiber Membrane with High Permeability and Superior Catalytic Performance

A Review on the Recent Development of Carbon Nanotubes (CNTs) Application for Polymeric Mixed-Matrix Membranes: Synthesis, Performance, and Future Challenges

Robust and Highly Efficient Free‐Standing Carbonaceous Nanofiber Membranes for Water Purification

Tip and inner walls modification of single-walled carbon nanotubes (3.5 nm diameter) and preparation of polyamide/modified CNT nanocomposite reverse osmosis membrane

Fabrication and optimization of curcumin-multiwalled carbon nanotube (C-MWCNT) conjugate reinforced electrospun polyacrylonitrile membrane for water treatment applications

Preparation of Metal–Organic Framework/Polyvinylidene Fluoride Mixed Matrix Membranes for Water Treatment

Nonpolar cross-stacked super-aligned carbon nanotube membrane for efficient wastewater treatment

Synthesis and water permeation studies of polysulfone based composite membranes having vertically aligned CNTs

Dual modification of reverse osmosis membranes with NH2-MIL-125 and functionalised multiwalled carbon nanotubes for enhanced nanoplastic removal

Carbon nanotube composite membranes for small ‘designer’ water treatment systems

Carbon nanotube membranes for water purification: Developments, challenges, and prospects for the future

Carbon Nanotube Membranes in Water Treatment Applications

In-Situ Modification of Nanofiltration Membranes Using Carbon Nanotubes for Water Treatment

Porous Al2O3-CNT Nanocomposite Membrane Produced by Spark Plasma Sintering with Tailored Microstructure and Properties for Water Treatment

CNTs Intercalated LDH Composite Membrane for Water Purification with High Permeance

Novel Ultrafiltration Membranes Prepared from a Multi-Walled Carbon Nanotubes/polymer Composite