Abstract:Due to the growing electric vehicle market and new trends to reduce fuel consumption for a healthy environment, safe and reliable vehicles are desirable for reasons beyond EV and new technology. Although certain safety standards and legislation are in place and continuously improving but several concerns including battery safety, battery performance, vehicle structure, and battery design to be considered as these affect the overall reliability of Electric vehicles (EVs). Lithium-ion battery technology is considered a good solution to power electric vehicles but potential overheating due to stressful conditions such as mechanical abuse, overcharge, over-discharge, short circuit, and excessive heat from external environment gives rise to safety issues and the occurrence of one or more than one of these can lead to thermal runaway. In most cases, an electric short circuit is a necessary but not sufficient condition for the occurrence of thermal runaway after mechanical abuse. Chemistry of the cell, the resistance of separator to heat, size of the fractured part, and rate of heat transfer all play a role in processes leading to a thermal runaway, if the cell has not gone to thermal runaway right away it can still go into a slow process of electrochemical reaction, releasing gases that eventually could lead to a catastrophic event. This abstract investigates the mechanical behaviour of the separator in the LiCoO2/Graphite cylindrical 18650 cells. Internal short circuit (ISC) behaviour, strain rate dependency, and electrochemical status of the cells (i.e. SOC dependency) are studied to understand failure patterns. Furthermore, a simple and effective constitutive model for the separator layer is formed, facilitating further mechanical analysis and numerical simulation of lithium-ion battery study. The occurrence of ISC is investigated by jellyroll deformation where the casing is removed, and quasi-static load is applied. The numerical simulation model is developed to further investigate sequential structural failures and temperature changes. Simulation results showed good accuracy with experimental results and are useful to predict structural failure of cells. The number of failures including electrolyte leakage, change in shape, sudden voltage drop/temperature rise, and gas venting are observed.

Electro-thermal coupling model of lithium-ion batteries under external short circuit

Electro-Thermal Modeling of a Hollow Structure Design of Cylindrical Lithium-Ion Battery

Model-based fault diagnosis approach on external short circuit of lithium-ion battery used in electric vehicles

A Detailed Finite Element Model of Internal Short Circuit and Venting During Thermal Runaway in a 32650 Lithium-Ion Battery

Numerical study on thermal characteristics under external short circuit for Li||Bi liquid metal batteries

Detection of internal short circuit in lithium-ion batteries based on electrothermal coupling model

Online Fault Diagnosis of External Short Circuit for Lithium-Ion Battery Pack

Analysis of Internal Short Circuit and Thermal Runaway of Li-Ion Battery Due to Mechanical Abuse

An electrochemical-thermal coupling model for prismatic lithium-ion batteries over wide temperature range

A Three-Heat-Source Electro-Thermal Coupled Model for Fast Estimation of the Temperature Distribution of a Lithium-Ion Battery Cell

Thermal Modelling of Large-Format Laminated Li-ion Battery and Experimental Validation Using Embedded Thermocouples

Analysis on the Fault Features for Internal Short Circuit Detection Using an Electrochemical-Thermal Coupled Model

Electro-Thermal Modeling And Experimental Verification For 18650 Li-Ion Cell

Three-dimensional electrochemical-magnetic-thermal coupling model for lithium-ion batteries and its application in battery health monitoring and fault diagnosis

Study of lithium-ion battery module external short circuit risk and protection design

Electro-thermal Modeling and Experimental Validation for Lithium Ion Battery

Coupled electrothermal model and thermal fault diagnosis method for lithium-ion battery

An electrochemical-thermal coupling model based on two-factor parameter modification for Li-ion battery

Extending a Multi-Physics Li-Ion Battery Model from Normal Operation to Short Circuit and Venting

Evaluating the accuracy of electro-thermal coupling model in lithium-ion battery via altering internal resistance acquisition methods

Three-Dimensional Thermal Modeling of Internal Shorting Process in a 20ah Lithium-Ion Polymer Battery