Abstract:Purpose Concerns over the pollution caused by internal combustion vehicles have increased owing to population and industrialization increment. Addressing the confrontations, the demand for electric vehicles (EVs) as a combustion engine substitute became necessary in responding to environmental worries from internal combustion. The development of bio lubricant in lubricating the sliding parts of EVs is required to maintain the sustainability idea and to improve the system performance, which this research tends to explore. Design/methodology/approach In this research, the enhancement of base Jatropha oil was done using polytetrafluoroethylene (PTFE) and hexagonal boron nitrate (h-BN) as additives. Different characterization was conducted on the new formulation to ascertain its anticorrosion tendency. The wear and friction behavior of the formulations on the tribo-pairs surfaces in contact were investigated using ball on flat tribometer to determine their tribological responsiveness as mineral lubricant alternative. To explore the surface topography, surface profilometer, scanning electron microscope and energy dispersive X-ray investigations were PTFE, lubrication and EV carried out. Findings The test's input parameters were EVs' usual load and sliding speed, and the addition concentrations for PTFE were 0.3 Wt.%, 0.4 Wt.%, 0.5 Wt.% and 0.6 Wt.%, whereas h-BN were 0.4 Wt.%, 0.8 Wt.% and 1.2 Wt.%, respectively. The study on corrosion demonstrated resistance when applied PTFE and h-BN additives in Jatropha oil. The analysis revealed that 0.5 Wt.% PTFE + 0.8 Wt.% h-BN concentrations significantly improved the tribological characteristics when compared to the base Jatropha oil. The application of formulations yielded percentage reduction of 8.67%, 10.98%, 7.34% and 7.35%, respectively, for 0.5% poly + 0.5% h-BN, 0.5% poly + 0.6% h-BN, 0.5% poly + 0.7% h-BN, 0.5% poly + 0.8% h-BN against base Jatropha oil under 20 N. Originality/value The formulation of PTFE and h-BN for electric transmission with wear and friction effects was accomplished in this paper. The mechanism of particle diffusing at the sliding contact on tribological behavior could be examined based on the created model of operation. Peer review The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-07-2023-0235/

Greases for electric vehicle motors: Bearing friction torque under driving cycle conditions and the thickener effect on oil release

Rheological and Tribological Properties of Lithium Grease and Polyurea Grease with Different Consistencies

Grease-lubricated tribological contacts – Influence of graphite, graphene oxide and reduced graphene oxide as lubricating additives in lithium complex (LiX)- and polypropylene (PP)-thickened greases

Impact of grease physical properties on the friction torque and service life of wheel bearings

Rheological Characterization and Tribological Evaluation of Water-Based Lubricants in AISI 52100 Bearing Steel

Effect of the grease thickener on tribological properties of Si3N4/GCr15 contact interface and the performance in hybrid ceramic ball bearing

Tribological Behaviors of Some Novel Dimercaptothiadiazole Derivatives Containing Hydroxyl As Multifunctional Lubricant Additives in Biodegradable Lithium Grease

Effect of liquid contaminants on tribological performance of greases

Lubricity performance of Jatropha oil incorporated PTFE and h-BN as additives for electric vehicles transmission lubrication

Rheology and Tribological Correlation of Lithium Base Greases

Investigating the effects of base oil type on microstructure and tribological properties of polyurea grease

Investigation of friction and vibration performance of lithium complex grease containing candle soot on aviation electrical machine

Analysis of Tribological Properties of Engine Lubricants Used in Hybrid Vehicles

Comparative study on corrosion resistance and lubrication function of lithium complex grease and polyurea grease

Sustainable Grease Lubrication Induced by Graphene Oxide and LiFePO4

Friction and wear performance of polyether ether ketone (PEEK) polymers in three lubrication regimes

Comparative Study on the Performance of Gel Grease for High-End Equipment Based on the Synergistic Effect of Friction-Reducing Agents

Triboelectric Performance of Ionic Liquid, Synthetic, and Vegetable Oil-Based Polytetrafluoroethylene (PTFE) Greases

Tribological Behaviors of Three Novel Imidazoline-Type Thiadiazole Derivatives As Multifunctional Lubricant Additives in Biodegradable Lithium Grease

Investigations on Ways to Improve the Scuffing and Wear Behavior of Oil-Free Water-Based Lubricants for Gear Applications

Investigation of friction and vibration performance of lithium complex grease containing nano-particles on rolling bearing