Abstract:It is known that the reaction rate of the thermal decomposition of polymer-bonded explosives exposed to cook-off has a certain relation with temperature, confining pressure and some other factors, which were verified by many experiments. Temperature-dominated thermal-decomposition models were developed for various high explosives and applied to study their decomposition process, such as HMX- and TATB-based polymer-bonded explosives. These models have reasonable accuracy. For example, the multistep thermal-decomposition model of PBX 9501 (which consists of 95% HMX, 2.5% Estane and 2.5% BDNPA/F) proposed by Tarver considers decomposition of both HMX and polymer binders. The temperature-dominated thermal-decomposition model only applies to preignition thermal decomposition. After ignition occurs, the dominant mechanism of the reaction transforms to deflagration and subsequent explosion, where the effect of pressure can no longer be neglected. Furthermore, the time scale of deflagration and explosion (millisecond or microsecond) differs significantly from the time scale of slow thermal decomposition (hours or minutes). The numerical model of postignition phenomenon (deflagration and final explosion) is still under investigation and is far from maturity. The predicted violence scale resulting from thermal explosion does not agree with experiment very well. An alternative method is to conduct a thermal–mechanical analysis for preignition stage, which takes advantage of a developed temperature-dominated thermal-decomposition model, and to analyze the stress caused by quasi-static thermal expansion. Herein, a thermal–mechanical analysis is implemented for a one-dimensional time-to-explosion experiment (ODTX) and a scaled thermal explosion experiment (STEX) with HMX-based polymer-bonded explosives inside using the finite element method. Then, the finite element model is applied to investigate the thermal decomposition of PBX 9501 inside an explosive device exposed to cook-off. The regions that have maximum temperature, maximum hydrostatic pressure and maximum von Mises stress are identified based on simulation results, which can benefit future improvement of the explosive device.

Kinetic analysis of the thermal decomposition of three LOVA gun propellants based on RDX and nitrocellulose

Insight into thermal decomposition behavior of ammonium dinitramide‐based liquid propellant through reactive molecular dynamics simulations

Reactive molecular dynamics study on the thermal decomposition reaction of a triple-base solid propellant

TATB thermal decomposition: An improved kinetic model for explosive safety analysis

Insight into the Initial Decomposition Mechanism of RDX Based on Probing Key Intermediates with Online Photoionization Mass Spectrometry

Thermal decomposition and kinetics of electrically controlled solid propellant through thermogravimetric analysis

Decomposition of 2,6‐diamino‐3,5‐dinitropyrazine‐1‐oxide (LLM‐105): from Thermodynamics to Kinetics

ReaxFF molecular dynamics simulations on thermal decomposition of RDX-based CMDB propellants

Reactive Molecular Dynamics Simulation of Thermal Decomposition for Nano-Aluminized Explosives

Thermal Decomposition Kinetics and Spectral Analysis of Mixed Ester Propellants

Theoretical Kinetic Studies on Thermal Decomposition of Glycerol Trinitrate and Trimethylolethane Trinitrate in the Gas and Liquid Phases

Thermal and Electrolytic Decomposition and Ignition of HAN–Water Solutions

Modified Arrhenius kinetics for double base propellant decomposition: effect of water

Experimental and Numerical Simulation Study on Thermal Decomposition Model of Ammonium Nitrate

Thermal–mechanical analysis for confined HMX-based polymer-bonded explosives

Thermal stability evaluation of black powder, RDX, PETN and TNT

Reaction mechanism and kinetic modeling of gas-phase thermal decomposition of prototype nitramine compound HMX

Experimental Investigation on the Evaporation and Combustion Processes of Ammonium-Dinitramide-Based Liquid Propellant

Thermal Decomposition Behavior, Kinetics, Thermal Safety and Burning Characteristics of Guanidinium-5-aminotetrazole (GA) Based Propellants

Experimental and Kinetic Modeling Study on the Low-Temperature Decomposition and Autoignition of 2-Azido-n,n-dimethylethanamine: A Promising Green Mono- and Bi-Propellant

Thermal decomposition of nitromethane: Experiments and model validation