Abstract:Lithium ion batteries have a very wide application range. They can power up small electronic devices such as smart watches to larger electric vehicles. Due to its varied range of applications, they come in different packaging and in such battery packs, even when individual cell voltage exceeds by a few milli‐volts above 4.2 V, it may result in thermal runaway and explode the cell. During discharge cycle, cell imbalances hinder the use of battery to its full capacity. This in turn decreases the battery lifetime. The individual battery cells should be equalized on a regular basis to keep the imbalances to a minimum and to have a good battery life. The process of balancing the individual cell charges by measuring the cell State of Charge (SoC) and its voltage in a battery pack is known as Cell Balancing. This paper details an active cell balancing technique that uses a buck converter for balancing a series connected battery pack of lithium‐ion cells. The buck converter is constructed from two MOSFET switches, one turned on for charging the cells and the other one is used for discharging the cells. An algorithmic model that measures the individual cell voltages based on charge equalization is developed for a pack of series connected Li‐ion battery cells. The developed model is simulated using MATLAB for verifying its performance. It is found that this algorithmic model produces a state of charge of 2.5% among the cells in a short period as compared to the conventional cell balancing technique. This parameter directly defines the cell equalization time and thus it is found that the system responds faster. The results show that this method can self‐adaptively attain satisfactory performance within a limited equalizing period. Lithium‐ion batteries have a very wide application range. They can power up small electronic devices such as smart watches to larger electric vehicles. Due to its varied range of applications, they come in different packaging and in such battery packs, even when individual cell voltage exceeds by a few milli‐volts above 4.2 V, it may result in thermal runaway and explode the cell. During discharge cycle, cell imbalances hinder the use of battery to its full capacity. This in turn decreases the battery lifetime. The individual battery cells should be equalized on a regular basis to keep the imbalances to a minimum and to have a good battery life. The process of balancing the individual cell charges by measuring the cell state of charge (SoC) and its voltage in a battery pack is known as cell balancing. This paper details an active cell balancing technique that uses a buck converter for balancing a series connected battery pack of lithium‐ion cells. A buck converter along with a pair of MOSFET switches for each cell, one turned on for charging the cell and the other one turned on while discharging the cell is used in this experiment. An algorithmic model suitable for reconfigurable battery systems that measures the individual cell voltages and is developed for balancing a pack of series connected Li‐ion battery cells. The developed model is simulated using MATLAB for verifying its performance. A state of charge of 25% is maintained across the cells and when SoC value drops below this even a difference of 0.02% is sensed by the algorithm to initiate balancing function. This balancing is found to take 275 ms to balance three 3.7 V batteries and thus the model is found to respond faster. The results show that this method can self‐adaptively attain satisfactory performance within a limited equalizing period.

Simulation-Based Analysis of Equalization Algorithms on Active Balancing Battery Topologies for Electric Vehicles

Hybrid Equalization Topology for Battery Management Systems Applied to an Electric Vehicle Model

A Unified Model for Active Battery Equalization Systems

A novel active cell balancing topology for serially connected Li-ion cells in the battery pack for electric vehicle applications

Adaptive estimation-based hierarchical model predictive control methodology for battery active equalization topologies: Part I–Balancing strategy

A critical review of battery cell balancing techniques, optimal design, converter topologies, and performance evaluation for optimizing storage system in electric vehicles

Characteristics of Battery Management Systems of Electric Vehicles with Consideration of the Active and Passive Cell Balancing Process

On‐line Equalization for Lithium Iron Phosphate Battery Packs Based on Voltage Threshold Integral

Optimal Cell-to-Cell Balancing Topology Design for Serially Connected Lithium-Ion Battery Packs

Research on Topology Technology of Integrated Battery Energy Storage System with Reconfigurable Battery and Converter

Module-Based Active Equalization for Battery Packs: A Two-Layer Model Predictive Control Strategy

Li-ion-based Battery Pack Designing and Sizing for Electric Vehicles under Different Road Conditions

Research progress of energy equalization topology of power lithium battery pack

Active Cell Balancing of Lithium-ion Battery Pack Using Dual DC-DC Converter and Auxiliary Lead-acid Battery

Modularized global equalization of battery cells for electric vehicles

Performance Evaluation of Modularized Global Equalization System for Lithium-Ion Battery Packs

A Novel Active Equalization Method for Lithium-Ion Batteries in Electric Vehicles

Investigation of active cell balancing performance for series connected lithium‐ion cells in electric vehicle applications

Improved Cell Equalizing Topology for Serially Connected Lithium-Ion Battery Packs

Analysis of cell balancing of Li-ion batteries with dissipative and non-dissipative systems for electric vehicle applications

A novel double-layer active equalization scheme for lithium-ion batteries combining wireless power transfer