Abstract:Background: Relative motion between the residual limb and socket in individuals with transtibial limb loss can lead to substantial consequences that limit mobility. Although assessments of the relative motion between the residual limb and socket have been performed, there remains a substantial gap in understanding the complex mechanics of the residual limb-socket interface during dynamic activities that limits the ability to improve socket design. However, dynamic stereo x-ray (DSX) is an advanced imaging technology that can quantify 3D bone movement and skin deformation inside a socket during dynamic activities. Objective: This study aims to develop analytical tools using DSX to quantify the dynamic, in vivo kinematics between the residual limb and socket and the mechanism of residual tissue deformation. Methods: A lower limb cadaver study will first be performed to optimize the placement of an array of radiopaque beads and markers on the socket, liner, and skin to simultaneously assess dynamic tibial movement and residual tissue and liner deformation. Five cadaver limbs will be used in an iterative process to develop an optimal marker setup. Stance phase gait will be simulated during each session to induce bone movement and skin and liner deformation. The number, shape, size, and placement of each marker will be evaluated after each session to refine the marker set. Once an optimal marker setup is identified, 21 participants with transtibial limb loss will be fitted with a socket capable of being suspended via both elevated vacuum and traditional suction. Participants will undergo a 4-week acclimation period and then be tested in the DSX system to track tibial, skin, and liner motion under both suspension techniques during 3 activities: treadmill walking at a self-selected speed, at a walking speed 10% faster, and during a step-down movement. The performance of the 2 suspension techniques will be evaluated by quantifying the 3D bone movement of the residual tibia with respect to the socket and quantifying liner and skin deformation at the socket-residuum interface. Results: This study was funded in October 2021. Cadaver testing began in January 2023. Enrollment began in February 2024. Data collection is expected to conclude in December 2025. The initial dissemination of results is expected in November 2026. Conclusions: The successful completion of this study will help develop analytical methods for the accurate assessment of residual limb-socket motion. The results will significantly advance the understanding of the complex biomechanical interactions between the residual limb and the socket, which can aid in evidence-based clinical practice and socket prescription guidelines. This critical foundational information can aid in the development of future socket technology that has the potential to reduce secondary comorbidities that result from complications of poor prosthesis load transmission. International registered report identifier (irrid): DERR1-10.2196/57329.

An adaptive prosthetic socket for people with transtibial amputation

A pneumatic reconfigurable socket for transtibial amputees

An Adaptive Socket Attaches onto Residual Limb Using Smart Polymers for Upper Limb Prosthesis

Effects of Prosthetic Socket Design on Residual Femur Motion Using Dynamic Stereo X-Ray - A Preliminary Analysis

Assessing Socket Fit Effects on Pressure and Shear at a Transtibial Residuum/Socket Interface

A Sagittal Planar Ankle-Foot Prosthesis with Powered Plantarflexion and Socket Alignment

Evaluating the Effectiveness of Transtibial Prosthetic Socket Shape Design Using Artificial Intelligence: A Clinical Comparison With Traditional Plaster Cast Socket Designs

Air microfluidics-enabled soft robotic transtibial prosthesis socket liner toward dynamic management of residual limb contact pressure and volume fluctuation

A Comparison between Evidence-Generated Transtibial Sockets and Conventional CADCAM Designs, from the Patient's Perspective

Design of lower limb prosthetic sockets: a review

Quantifying Bone and Skin Movement in the Residual Limb-Socket Interface of Individuals With Transtibial Limb Loss Using Dynamic Stereo X-Ray: Protocol for a Lower Limb Loss Cadaver and Clinical Study

Adaptive Locomotion Transition Recognition with Wearable Sensors for Lower Limb Robotic Prosthesis

Silicone soft socket system for the treatment of geriatric transtibial amputees

Insights into the spectrum of transtibial prosthetic socket design from expert clinicians and their digital records

Exploring the effects of increased socket-residual limb coupling integrity via vacuum assisted suspension on prosthetic control: a preliminary study in transtibial prosthesis users

A Digital Process To Replicate The Socket-Foot Alignment In Below-Knee Running Specific Prostheses

Enabling Technology for Remote Prosthetic Alignment Tuning

A Data-Driven Design Framework for Structural Optimization to Enhance Wearing Adaptability of Prosthetic Hands

A Modular Transradial Bypass Socket for Surface Myoelectric Prosthetic Control in Non-Amputees

A clinical comparison of a digital versus conventional design methodology for transtibial prosthetic interfaces

Soft robotics-inspired sensing system for detecting downward movement and pistoning in prosthetic sockets: A proof-of-concept study