Abstract:Background There is a quest of novel functional and reliable platforms for enhancing the efficiency of microextraction approaches in troublesome matrices, such as industrial wastewaters. 3D printing has been proven superb in the analytical field to act as the springboard of microscale extraction approaches. Results In this work, low-force stereolithography (SL) was exploited for 3D printing and prototyping bespoke fluidic devices for accommodating nonsupported microelectromembrane extraction (μEME). The analytical performance of 3D-printed μEME devices with distinct cross-sections, including square, circle, and obround, and various channel dimensions was explored against that of commonly used circular polytetrafluoroethylene (PTFE) tubing in flow injection systems. A computer-controlled millifluidic system was harnessed for the (i) automatic liquid-handling of minute volumes of donor, acceptor, and organic phases at the low μL level that spanned from 3 to 44 μL in this work, (ii) formation of three-phase μEME, (iii) in-line extraction, (iv) flow-through optical detection of the acceptor phase, and (v) solvent removal and regeneration of the μEME device and fluidic lines. Using methylene blue (MB) as a model analyte, experimental results evinced that the 3D-printed channels with an obround cross-section (2.5 mm × 2.5 mm) were the most efficient in terms of absolute extraction recovery (59%), as compared to PTFE tubing of 2.5 mm inner diameter (27%). This is attributed to the distinctive convex interface of the organic phase (1-octanol), with a more pronounced laminar pattern, in 3D-printed SL methacrylate-based fluidic channels against that of PTFE tubing on account of the enhanced octanol wettability and lower contact angles for the 3D-printed devices. The devices with obround channels were leveraged for the automatic μEME and in-line clean-up of MB in high matrix textile dyeing wastewater samples with relative recoveries ≥81%, RSD% ≤ 17.1% and LOD of 1.3 μg/mL. The 3D-printed nonsupported μEME device was proven superb for the analyses of wastewater samples with an elevated ionic strength (0.7 mol L −1 NaCl, 5000 mg L −1 Na 2 CO 3 , and 0.013 mol L −1 NaOH) with recorded electric currents below 12 μA. Novelty The coupling of 3D printing with nonsupported μEME in automatic flow-based systems is herein proposed for the first time and demonstrated for the clean-up of troublesome samples, such as wastewaters.

A New 3D Printing Milli-Fluidic Device with Integrated Nanojunction for On-Site Colorimetric Analysis of Iron in Water and Soil Samples

3D Printed Microfluidic Device with Microporous Mn2O3-Modified Screen Printed Electrode for Real-Time Determination of Heavy Metal Ions.

3D printed microfluidic devices with electrodes for electrochemical analysis

Advancing Multi‐Ion Sensing with Poly‐Octylthiophene: 3D‐Printed Milker‐Implantable Microfluidic Device

3D Printed Paper-Based Microfluidic Analytical Devices

Application of a Micro Free-Flow Electrophoresis 3D Printed Lab-on-a-Chip for Micro-Nanoparticles Analysis

Paper-based Three-Dimensional Microfluidic Device for Monitoring of Heavy Metals with a Camera Cell Phone.

3D printed microfluidic devices with integrated versatile and reusable electrodes

A Low-Cost, Disposable and Portable Inkjet-Printed Biochip for the Developing World

Integration of 3D printed Mg2+ potentiometric sensors into microfluidic devices for bioanalysis

A Facile Method to Fabricate an Enclosed Paper-Based Analytical Device via Double-Sided Patterning for Ionic Contaminant Detection

3D-printed electrochemical platform with multi-purpose carbon black sensing electrodes

A 3D printed assisted microfluidic absorbance-based measurement system for Biological Assay

A Portable Microfluidic Device-Based Colorimetric Naked-Eye Sensors for Determination of Mercury and Arsenic Ions in River Water Samples

A novel ratiometric design of microfluidic paper-based analytical device for the simultaneous detection of Cu2+ and Fe3+ in drinking water using a fluorescent MOF@tetracycline nanocomposite

A Trianalyte μPAD for Simultaneous Determination of Iron, Zinc, and Manganese Ions

Uv-Nanoimprint Lithography As A Tool to Develop Flexible Microfluidic Devices for Electrochemical Detection

3D-printed stereolithographic fluidic devices for automatic nonsupported microelectromembrane extraction and clean-up of wastewater samples

Determination of iron content by means of flow-field shaped solid electrode and 3D-printed flow cell

3-D printed microfluidics for rapid prototyping and testing of electrochemical, aptamer-based sensor devices under flow conditions

Wax screen-based fabrication of paper devices for the determination of iron in particulates of selected welding fumes in Addis Ababa, Ethiopia