Abstract:Abstract The marine controlled-source electromagnetic (CSEM) technology has attracted much attention for its capability in directly detecting thin hydrocarbon reservoirs. The approach is based on comparing the electric field amplitude as a function of the source-receiver offset with a similar measurement for a non-hydrocarbon bearing reservoir. The presence of hydrocarbon raises the amplitude of the measured electric field indicating the existence and to some degree determining the horizontal extent of the hydrocarbon zone; however with this approach it is difficult to know the reservoir's depth and shape. A more rigorous approach to address this type of application is the full nonlinear inversion. In this presentation we present the so-called parametric inversion algorithm (PIA), which uses a priori information on the geometry to reduce the number of unknown parameters and to improve the quality of the reconstructed conductivity image. This PIA approach can be also used to refine the conductivity image that we obtained using the pixel-based inversion (PBI) algorithm. The PIA also adopts the Gauss-Newton minimization method. The parameters that govern the location and the shape of an anomaly include the depth and the location of the user-defined nodes for the boundary of the region. The unknown parameter that describes the physical property of the region is the conductivity. We will show some inversion results of synthetic and field data to illustrate the PIA approach. We further show that by combining both the pixel-based inversion algorithm and PIA we arrive at a better interpretation of the controlled-source electromagnetic data. Introduction With the advances in sensor and signal processing technologies, the marine controlled-source electromagnetic (CSEM) method has been deployed in the past few years for offshore exploration (MacGregor and Sinha (2000); Ellingsrud et al. (2002); Eidesmo et al. (2002); Constable and Srnka (2007)). The high contrast between resistive oil-bearing reservoirs and the conductive surrounding medium suited this method very well for hydrocarbon explorations. However, the diffusive nature of the electromagnetic field in the conductive environment makes the interpretation of the CSEM data very challenging because most of the information on deep structures are contained in the weak part of the measured signals. Therefore, robust and efficient inversion approaches are in great need. PIA (Smith et al. (1999); Zhang et al. (2007)) reconstructed the shape, location and conductivity of the reservoir based on a priori information. Compared with pixel-based inversion algorithms (Abubakar et al. (2006)), PIA deals with fewer unknown parameters. This helps to achieve a quantitative interpretation from CSEM data. In this abstract, we present several improvements of the model-based inversion scheme of Zhang et al. (2007). These improvements include a new data weighting and a modified regularization scheme, inversion of multiple objects and an adaptive choice of the unknown parameters as the inversion iteration proceeds. All these helped the robust application of PIA in inverting field data.

Exploring Cole-Cole parameters: TDIP data inversion and subsurface characterization

Time-domain solution of Cole-Cole model with induced polarization method

Analysis Of Integrating Ert Data Of Different Array Types: Simulation Study And Observations On An Archaeological Site

Processing Time-Domain Induced Polarization Data Using Variational Mode Decomposition

Computation of Analytical Derivatives for Airborne TEM Inversion Using a Cole–Cole Parameterization Based on the Current Waveform of the Transmitter

3D DC inversion, visualization, and processing of dense time-lapse data in fine domains applied to remediation monitoring

Cross-borehole tomography with full-decay spectral time-domain induced polarization for mapping of potential contaminant flow-paths

Weighted Laterally Constrained Inversion of Airborne Transient Electromagnetic Data with IP Effects

Two-dimensional synchronous inversion of TDIP with cross-gradient constraint

Extraction of High Chargeability Distribution using Joint Inversion of Direct Current Resistivity and Time Domain Induced Polarization Data: A Development and Test Results on Uranium Bearing Target Rock

Model Order Reduction Method for 3-D Transient Electromagnetic Modeling With Induced Polarization Effects

Multi-parameter Imaging by Finite Difference Frequency Domain Full Waveform Inversion of GPR Data: A Guide for Sedimentary Architecture Modeling

Electromagnetic Modeling and Inversion Application for Oil and Gas Industry

Inversion Algorithms for Large-Scale Geophysical Electromagnetic Measurements

Hybrid parametric/smooth inversion of electrical resistivity tomography data

DNAPL flow and complex electrical resistivity evolution in saturated porous media: A coupled numerical simulation

Induced Polarization of Clayey Rocks and Soils: Non‐Linear Complex Conductivity Models

On negative induced polarization in frequency domain measurements

Preferential Pathways Inversion From Cross‐Borehole Electrical Data

Inversion Algorithms for Marine Controlled-source Electromagnetic Data

2-D transdimensional joint inversion of radio magnetotelluric and electrical resistivity tomography data