Abstract:The poor early shrinkage and cracking performances of manufactured sand concrete, waste powder concrete, and recycled aggregate concrete are the main difficulties in engineering applications. To solve these problems, early shrinkage and cracking, strength, and impermeability tests were performed on high-volume stone powder manufactured sand concrete mixed with fly ash and slag powder (FS), a shrinkage-reducing agent (SRA), polyvinyl alcohol (PVA) fibers, and a superabsorbent polymer (SAP). Furthermore, the microstructures and pore structures of these concretes were revealed using nuclear magnetic resonance (NMR) and scanning electron microscopy (SEM). The results showed that the mixture of FS, SRA, PVA fibers, and SAP could effectively inhibit the shrinkage strain and cracking area of the concrete. The effect of the SAP on reducing the early shrinkage of the concrete is the greatest, and the shrinkage strain can be reduced by 76.49%. The PVA fibers had the most obvious effect on inhibiting the early cracking of the concrete, and the total cracking area was reduced by 66.91%. Significantly, the incorporation of the FS can improve the particle gradation and the pore structure and improve its compactness. The PVA fibers not only provide good carriers for cement-based materials but also enhance the bonding force between the particles inside the concrete, filling the pores inside the concrete, inhibiting the loss of water, and reducing the generation of internal microcracks. The FS and PVA can reduce the shrinkage and cracking risk and improve the strength and impermeability of the concrete. Although the SRA and SAP can reduce the shrinkage and cracking risks, it will lead to a significant decrease in the later strength and impermeability. The main reason is that the SRA leads to an increase in micropores in the matrix and microcracks near the aggregate, which are not conducive to the development of the strength and penetration resistance of the MS. Similarly, the SAP can promote the rapid formation of ettringite (Aft) at an early age and improve the early shrinkage, early cracking, and early strength of the concrete. However, with an increase in age, the residual pores, after SAP dehydration, will cause the deterioration of the concrete pore structure, resulting in the deterioration of the strength and impermeability.

The study of the freeze-thaw resistance and carbonation resistance of manufactured sand-RAC based on fly ash and slag powder

Mechanical and Durability Properties of Sustainable Self-Compacting Concrete with Recycled Concrete Aggregate and Fly Ash, Slag and Silica Fume

Development of Sustainable Self-Compacting Concrete Using Recycled Concrete Aggregate and Fly Ash, Slag, Silica Fume

Optimal Utilization of Low-Quality Construction Waste and Industrial Byproducts in Sustainable Recycled Concrete

Synergetic Effect of Fly Ash and Ground-Granulated Blast Slag on Improving the Chloride Permeability and Freeze–thaw Resistance of Recycled Aggregate Concrete

Mixture Design and Mechanical Properties of Recycled Mortar and Fully Recycled Aggregate Concrete Incorporated with Fly Ash

Utilization of Mechanochemically Pretreated Municipal Solid Waste Incineration Fly Ash for Supplementary Cementitious Material

Effect of Fly Ash on the Mechanical Properties and Microstructure of Cement-Stabilized Materials with 100% Recycled Mixed Aggregates

Influence of Mineral Additions on the Anti-Cracking Performance of Recycled Aggregate Concrete

Fresh and hardened properties of recycled plastic fiber reinforced self-compacting concrete made with recycled concrete aggregate and fly ash, slag, silica fume

Study on the Performance of Recycled Cement-Stabilized Macadam Mixture Improved Using Alkali-Activated Lithium Slag–Fly Ash Composite

High-Performance Materials Improve the Early Shrinkage, Early Cracking, Strength, Impermeability, and Microstructure of Manufactured Sand Concrete

Improving Performance of Recycled Aggregate Concrete with Superfine Pozzolanic Powders

Influence of Accelerated Carbonation on the Performance of Recycled Concrete Containing Fly Ash, Recycled Coarse Aggregate, and Fine Aggregate

Properties of High-Content Micro-Steel Fiber Self-Compacting Concrete Incorporating Fly Ash and Slag Powder Performance Study

Investigating on the Pavement Performance of Multi-Source Solid Wastes by Cement and Fly Ash

Enhancing the Mechanical and Durability Properties of Fully Recycled Aggregate Concrete Using Carbonated Recycled Fine Aggregates

Experimental study on the compressive strength, damping and interfacial transition zone properties of modified recycled aggregate concrete

Experimental Research on the Performance of Recycled Waste Concrete Powder (RWCP) on Concrete

Freeze-Thaw Resistance and Microstructural Analysis of Recycled Aggregate Concrete Incorporating Ferronickel Slag As Fine Aggregate

Effect of decarbonization of high carbon fly ash on workability, mechanical properties and durability of concrete