Abstract:In Mindlin-Reissner plate problem, the rotations and stress resultants may vary sharply within a narrow area near certain boundaries. This phenomenon is the so-called edge effect or boundary layer effect. Unfortunately, due to the inherent limitations, most existing elements cannot easily capture such steep rotation/ resultant distributions. To solve this problem, scholars have taken different strategies, most of that can be classified into two kinds: (i) employing an extremely fine mesh or an adaptive mesh refinement technique; and (ii) utilizing a very high-order element model. However, both them will result in great computation expense. In this work, a new displacement-based element model is proposed for analysis of such challenging problem. Firstly, the analytical solutions of two displacement functions F and f are utilized to assume the displacement filed with the element. Since the displacement, strain and stress/resultant variables derived from displacement functions can a prior satisfy all governing equations of Mindlin-Reissner plate, this assumed displacement field is quite reasonable. Secondly, related stress/resultant conditions at certain boundaries are applied as constraints to above assumed displacement field. Therefore, some items of trial functions will be released and the resulting one can exactly satisfy these stress/resultant conditions. Thirdly, the general conforming theory is employed to determine the relations between the assumed displacement field and the element nodal DOFs. The general conforming method is kind of relaxed conforming approach, meaning that the general conforming elements behaves like nonconforming elements on a coarse mesh, and will converge like conforming elements as the mesh refined. Finally, the new elements can be constructed following the principle of minimum potential energy. These new elements can be allocated along the free/SS1 edges to model the boundary layers. Through this way, the edge effect problem can be efficiently solved.

An aspect ratio dependent lumped mass formulation for serendipity finite elements with severe side-length discrepancy

Conjugate Adjoint Gradient-Based Inverse Design Method for Aperiodic Frequency-Selective Surface with Weighted Loss

Mass lumping techniques in the spectral element method: On the equivalence of the row-sum, nodal quadrature, and diagonal scaling methods

H-Adaptive Enhanced Finite Element Method for Plane Problems

A Legendre spectral element method with optimal mass matrix for seismic wave modeling

New quadratic/serendipity finite volume element solutions on arbitrary triangular/quadrilateral meshes

A lumped mass Chebyshev spectral element method and its application to structural dynamic problems

Mass lumping of stable generalized finite element methods for parabolic interface problems

A SBFEM formula for the mixed-order hexahedron interpolation based on serendipity elements

AN H-Type ADAPTIVE FINITE ELEMENT

An Optimization Model and Algorithm for the Smoothing of Sizing Functions of Three-Dimensional Finite Element Meshes

Nodal Accuracy Improvement Technique for Linear Elements with Application to Adaptivity

Spectral-element Method with an Optimal Mass Matrix for Seismic Wave Modelling

A displacement-based element model for solving the edge effect problem of Mindlin-Reissner plate

Higher‐order inverse mass matrices for the explicit transient analysis of heterogeneous solids

A Novel Hybrid Stress-Function Finite Element Method Immune to Severe Mesh Distortion

Three‐dimensional spline scaled boundary finite elements with high‐order completeness

Robust mass lumping and outlier removal strategies in isogeometric analysis

A Discrete Helmholtz Decomposition with Morley Finite Element Functions and the Optimality of Adaptive Finite Element Schemes

Solving Singularities in Electrostatics with High-Order FEM

An interpolatory basis lumped mass isogeometric formulation with rigorous assessment of frequency accuracy for Kirchhoff plates