Abstract:Abstract Drilling practice has been evolving parallel to the developments in the oil and gas industry. Current supply and demand for oil and gas dictate search for hydrocarbons either at much deeper and hard-to-reach fields, or at unconventional fields, both requiring extended reach wells, long horizontal sections, and 3D complex trajectories. Cuttings transport is one of the most challenging problems while drilling such wells, especially at mid-range inclinations. For many years, numerous studies have been conducted to address modeling of cuttings transport, estimation of the concentration of cuttings as well as pressure losses inside the wellbores, considering various drilling variables having influence on the process. However, such attempts, either mechanistic or empirical, have many limitations due to various simplifications and assumptions made during the development stage. Fluid thixotropy, temperature variations in the wellbore, uncertainty in pipe eccentricity as well as chaotic motion of cuttings due to pipe rotation, imperfections in the wellbore walls, variations in the size and shape of the cuttings, presence of tool joints on the drillstring, etc. causes the modeling of the problem extremely difficult. Due to the complexity of the process, the estimations are usually not very accurate, or not reliable. In this study, data-driven models are used to address the estimation of cuttings concentration and frictional loss estimation in a well during drilling operations, instead of using mechanistic or empirical methods. The selected models include Artificial Neural Networks, Random Forest, and AdaBoost. The training of the models is determined using the experimental data regarding cuttings transport tests collected in the last 40 years at The University of Tulsa – Drilling Research Projects, which includes a wide range of wellbore and pipe sizes, inclinations, ROPs, pipe rotation speeds, flow rates, fluid and cuttings properties. The evaluation of the models is conducted using Root Mean Square Error, R-Squared Values, and P-Value. As the inputs of the data-driven models, independent drilling variables are directly used. Also, as a second approach, dimensionless groups are developed based on these independent drilling variables, and these dimensionless groups are used as the inputs of the models. Moreover, performance of the data-driven model results are compared with the results of a conventional mechanistic model. It is observed that in many cases, data-driven models perform significantly better than the mechanistic model, which provides a very promising direction to consider for real time drilling optimization and automation. It is also concluded that using the independent drilling variables directly as the model inputs provided more accurate results when compared with dimensional groups are used as the model inputs.

Explicit Data-Based Model for Predicting Oil-Based Mud Viscosity at Downhole Conditions

Real-Time Prediction of Plastic Viscosity and Apparent Viscosity for Oil-Based Drilling Fluids Using a Committee Machine with Intelligent Systems

Data-Driven Framework for Real-time Rheological Properties Prediction of Flat Rheology Synthetic Oil-Based Drilling Fluids

FACILITATING MUD DESIGN, CEMENTING JOB DESIGN AND THE ENTIRE DRILLING OPERATIONS BY MODELLING THE RHEOLOGICAL PROPERTIES OF WATER-BASED MUD AND OIL-BASED MUD WITH TEMPERATURE

A viscosity prediction model for Kuwaiti heavy crude oils at elevated temperatures

Prediction of High-Pressure/High-Temperature Rheological Properties of Drilling Fluids from the Viscosity Data Measured on a Coaxial Cylinder Viscometer

A novel data-driven model for real-time prediction of static Young's modulus applying mud-logging data

Effect of temperature on transport index of fish oil-based drilling mud in high pressure high temperature well: a hybrid model approach

Real-Time Prediction of Rheological Properties of Invert Emulsion Mud Using Adaptive Neuro-Fuzzy Inference System

A novel mathematical model for modeling viscosity and temperature relationship for dead oils

Building 1D Mechanical Earth Model for Subba Oilfield in Iraq

A Developed Robust Model and Artificial Intelligence Techniques to Predict Drilling Fluid Density and Equivalent Circulation Density in Real Time

Prediction of Minimum Mud Weight for Prevention of Breakout Using New 3D Failure Criterion to Maintain Wellbore Stability

Estimation of Cuttings Concentration and Frictional Pressure Losses During Drilling Using Data-Driven Models

Characterization based machine learning modeling for the prediction of the rheological properties of water-based drilling mud: an experimental study on grass as an environmental friendly additive

Generalized Models for the Field Assessment of Drilling Fluid Viscoelasticity

Development of rheological models depending on the time, temperature, and pressure of wellbore cement compositions: a case study of southern Iran's exploratory oilfields

An Extended Unified Viscoelastic Model for Predicting Polymer Apparent Viscosity at Different Shear Rates

Prediction of Temperature and Viscosity Profiles in Heavy-Oil Producer Wells Implementing a Downhole Induction Heater

Prediction of Rheological Properties of Recirculating Water-Based Drilling Mud in Geothermal Exploration using Artificial Neural Networks with Tensor Flow

Investigation of Tool-Joint Effect on Non-Newtonian Drilling Fluids Following the Herschel–Bulkley Model Flow Behavior in Oil Well Drilling