Abstract:The heat generated by a high-power device will seriously affect the operating efficiency and service life of electronic devices, which greatly limits the development of the microelectronic industry. Carbon fiber (CF) materials with excellent thermal conductivity have been favored by scientific researchers. In this paper, CF/carbon felt (CF/C felt) was fabricated by CF and phenolic resin using the “airflow network method”, “needle-punching method” and “graphitization process method”. Then, the CF/C/Epoxy composites (CF/C/EP) were prepared by the CF/C felt and epoxy resin using the “liquid phase impregnation method” and “compression molding method”. The results show that the CF/C felt has a 3D network structure, which is very conducive to improving the thermal conductivity of the CF/C/EP composite. The thermal conductivity of the CF/C/EP composite reaches 3.39 W/mK with 31.2 wt% CF/C, which is about 17 times of that of pure epoxy.

Correction: Wu et al. 3D Thermal Network Supported by CF Felt for Improving the Thermal Performance of CF/C/Epoxy Composites. Polymers 2021, 13, 980

Correction: DBU-catalyzed biobased poly(ethylene 2,5-furandicarboxylate) polyester with rapid melt crystallization: synthesis, crystallization kinetics and melting behavior

Correction: Ultrahigh thermal conductive polymer composites by the 3D printing induced vertical alignment of carbon fiber

Correction: Three-dimensional Hybridized Carbon Networks for High Performance Thermoelectric Applications

Erratum: Corrigendum to “High-fidelity micro-scale modeling of the thermo-visco-plastic behavior of carbon fiber polymer matrix composites” (Composite Structures (2015) 134 (132–141))

Correction: Thermoelectric Nanowires for Dense 3D Printed Architectures.

Corrigendum to “High-Fidelity Micro-Scale Modeling of the Thermo-Visco-plastic Behavior of Carbon Fiber Polymer Matrix Composites” [compos Struct 134 (2015) 132–141]

Correction: High performance poly(methyl methacrylate) via hindered urea bond crosslinking

Correction: Chen et al. Preparation and Photothermal Antimicrobial Performance of Triple Linkage Hydrogels. Coatings 2024, 14, 363

Correction: Shah, M.I., Et Al. Properties of Electrospun Nanofibers of Multi-Block Copolymers of [Poly-Ε-caprolactone-b-poly(tetrahydrofuran-co-ε-caprolactone)]m Synthesized by Janus Polymerization. Polymers 2017, 9, 559

Erratum: Ultrathin conformal devices for precise and continuous thermal characterization of human skin

Erratum: 3D Printing Fiber Electrodes for an All-Fiber Integrated Electronic Device Via Hybridization of an Asymmetric Supercapacitor and a Temperature Sensor.

Correction: Optically Transparent High Temperature Shape Memory Polymers

Correction to: Enhanced microwave absorption properties of polymer-derived SiC/SiCN composite ceramics modified by TiC

Correction: Ultra-high thermal conductivities of tetrahedral carbon allotropes with non-simple structures

Correction: Ultrahigh power factor and flexible silver selenide-based composite film for thermoelectric devices

3D Thermal Network Supported by CF Felt for Improving the Thermal Performance of CF/C/Epoxy Composites

Correction To: Polymer Composites Filled with Core–shell Structured Nanofillers: Effects of Shell Thickness on Dielectric and Thermal Properties of Composites

Correction: Tong et al. Effect of Micro-Textures on the Surface Interaction of WC+Co Alloy Composite Coatings. Coatings 2022, 12, 1242

Correction for the Research Article: “High thermal conductivity in electrostatically engineered amorphous polymers” by A. Shanker, C. Li, G. Kim, D. Gidley, K. P. Pipe and J. Kim

Correction: Zhu Et Al. Electroactive Oxidized Alginate/Gelatin/MXene (ti3c2tx) Composite Hydrogel with Improved Biocompatibility and Self-Healing Property. Polymers 2022, 14, 3908