Abstract:Catalyst-free synthesis in three kinds of isocyanate-blocked imidazole compound was successfully achieved by chemically connecting 2-ethyl-4-methylimidazole (2E4MI) with hexamethylene diisocyanate (HDI), trimethylhexamethylene diisocyanate (TMHDI) or 4,4′-diphenylmethane diisocyanate (MDI), which were tested as the latent hardeners for epoxy (EP) resins. The chemical structures of the synthesized HDI-2E4MI, TMHDI-2E4MI and MDI-2E4MI were identified with Fourier transform infrared spectroscope (FTIR), 1H and 13C nuclear magnetic resonance (1H NMR and 13C NMR). Based on characterizations including thermogravimetry/differential scanning calorimetry (TG/DSC) simultaneous testing and hot-stage FTIR, it was found that both HDI-2E4MI and TMHDI-2E4MI exhibited two-step deblocking behavior, whereas the deblocking process of MDI-2E4MI was completed only via one step. Curing kinetics of HDI-2E4MI/EP, TMHDI-2E4MI/EP and MDI-2E4MI/EP systems were then studied by non-isothermal DSC using Kissinger model. The results revealed that MDI-2E4MI/EP system could be cured via a two-step reaction with the highest curing rate due to the high reactivity of MDI-2E4MI, which was much different from the four-step curing behaviors of both HDI-2E4MI/EP and TMHDI-2E4MI/EP systems. Compared to the reference 2E4MI, noticeably, the three synthesized hardeners showed the outstanding latent features with lower curing activity and longer shelf life and the EP systems cured by the hardeners exhibited desirable mechanical properties and thermal stability. This study provided a feasible approach to synthesize high-performance imidazole-based latent hardener for wide practical applications in a greenway via the blocking treatment through tailoring the isocyanate structure.

Enhancing deblocking efficiency and curing reaction of phenol-blocked polymeric methylenediphenyldiisocyanate for advanced epoxy-polyurethane film formulation

Synthesis, deblocking and cure reaction studies of secondary alcohol-blocked isocyanates

Studies on Cure Kinetics of Diglycidyl Ether of 4,4′-Bisphenol/4,4′-diaminobiphenyl Using the Advanced Isoconversional Method

Cure Kinetics of an Epoxy Resin Containing Naphthyl/dicyclopentadiene Moieties and Bis‐phenoxy (3‐hydroxy) Phosphine Oxide System and Properties of Its Cured Polymer

Thermal properties of an epoxy cresol-formaldehyde novolac/diaminodiphenyl sulfone system modified by bismaleimide containing tetramethylbiphenyl and aromatic ether structures

Learning about novel amine-adduct curing agents for epoxy resins: Butyl-glycidylether-modified poly(propyleneimine) dendrimers

Preparation and Properties of Waterborne Blocked Polyurethane

Study on Synthesis, Characterizations, and Properties of Pyridinol-Blocked Isocyanates and Waterborne Polyurethane

Phenylethynyl and Phenol End-Capping Studies of Polybiphenyloxydiphenylsilanes for Cross-Linking and Enhanced Thermal Stability

Catalyst-free synthesis of isocyanate-blocked imidazole and its use as high-performance latent hardener for epoxy resin

Solvent-resistant polyetherimide network systems via phenylethynylphthalic anhydride endcapping

Research on the Thermal Decomposition Reaction Kinetics and Mechanism of Pyridinol-Blocked Isophorone Diisocyanate

Synthesis of Water-Soluble Highly Blocked (≥ 98%) Isophorone Diisocyanate Using NaHSO3 and Its Effects on Paper Properties

Kinetics Studies of Synthesis of Double Bond of Blocked Water-Borne Polyurethane

Sustainable cashew nutshell oil-blocked diphenylmethane diisocyanates in co-polymerisation with natural rubber

Effect of the Hard Segment on the Properties of Uv Curable Waterborne Blocked Polyurethanes

Catechol- and phenolic Hydroxyl-Functionalized partially Bio-Based (Co)poly(ether sulfone)s with multifarious applicability

Polyurethane nanocomposites from 4‐bromo‐1H‐pyrazole‐blocked‐diisocyanates

Synthesis and characterization of a carborane-containing monofunctional imide monomer as a modifier for imide oligomer

Synthesis and Characterization of 1-(3-Aminopropyl)imidazole-Phenyl Isocyanate Adduct and Its Application as a Thermal Latent Curing Agent for Diglycidylether Bisphenol A Resin

Poly(hydroxyether of bisphenol A)-block-polydimethylsiloxane alternating block copolymer and its nanostructured blends with epoxy resin