Abstract:Lithium (Li) metal is a promising candidate for next-generation anode materials with high energy densities. However, Li dissolution/deposition processes are limited at the upper surface in contact with the electrolyte, which brings a locally high current density and then results in dendritic Li growth. This restraint of the local surface reaction during cycling has not been solved by commonly used modification strategies. In this study, a three-dimensional (3D) Li+ conductive skeleton is activated from atomic layer deposition (ALD) coating Li3PO4 (LPO) on the surface of the Ni foam (LPNF). Then, the skeleton is efficiently constructed in the Li metal anode by the lower-temperature Li infusion. Ionic conductor LPO layers and electronic conductor Ni fibers supply charge transport channels between the electrolyte and the internal Li. The mixed conductive network realizes holistic charge transfer, which is proved by in situ scanning electron microscopy experiments. In virtue of dispersive dissolution/deposition and optimized electrochemical kinetics brought by a Li+ conductive network, the composited Li electrode presents an excellent symmetric battery cycling stability (over 1200 h) and enhanced rate performances (stable cycling even at 10.0 mA cm-2). When matching with a LiCoO2 (LCO) cathode, LCO||Li@LPNF full batteries exhibit a capacity retention of 80.8% over 250 cycles. During cycling, there was no evidence of dendrite growth and the remaining Li in the composited anode showed a smooth, compact, and well-combined condition with LPNF. Through constructing a 3D Li+ conductive network, the composited Li metal anode breaks through the limit of the local surface reaction; this work proposes a novel insight of realizing holistic charging/discharging for the dendrite-free Li metal anode.

Lithium Metal Anodes: Composite Lithium Metal Anodes with Lithiophilic and Low‐Tortuosity Scaffold Enabling Ultrahigh Currents and Capacities in Carbonate Electrolytes (Adv. Funct. Mater. 14/2021)

Composite Lithium Metal Anodes with Lithiophilic and Low‐Tortuosity Scaffold Enabling Ultrahigh Currents and Capacities in Carbonate Electrolytes

Realizing Holistic Charging–Discharging for Dendrite-Free Lithium Metal Anodes Via Constructing Three-Dimensional Li+ Conductive Networks

An Ultrastable Lithium Metal Anode Enabled by Designed Metal Fluoride Spansules

Lithium Metal Anodes: A Lithium Metal Anode Surviving Battery Cycling Above 200 °C (Adv. Mater. 29/2020)

Composite Lithium Metal Anode by Melt Infusion of Lithium into A 3d Conducting Scaffold with Lithiophilic Coating

Surface graphited carbon scaffold enables simple and scalable fabrication of 3D composite lithium metal anode

High-Coulombic-Efficiency Lithium Metal Anodes Enabled by Three-Dimensional Lithiophilic Nanostructures with Multiscale Porosity

Self-Propagating Enabling High Lithium Metal Utilization Ratio Composite Anodes for Lithium Metal Batteries

Self-Organized Core-Shell Composite Electrodes for Copper-Free and Dendrite-Free Lithium Metal Batteries with Ultrahigh Energy Density

A lithiophilic and conductive interlayer for dendrite-free lithium metal anodes

A Superb 3D Composite Lithium Metal Anode Prepared by In-Situ Lithiation of Sulfurized Polyacrylonitrile

Stable Li Metal Anode with Protected Interface for High-Performance Li Metal Batteries

Infiltrating Lithium into Carbon Cloth Decorated with Zinc Oxide Arrays for Dendrite-Free Lithium Metal Anode

Defect-abundant Commercializable 3D Carbon Papers for Fabricating Composite Li Anode with High Loading and Long Life

Ultrahigh-current density anodes with interconnected Li metal reservoir through overlithiation of mesoporous AlF3 framework

Dendrite-free Li Metal Anodes with Confined Volume Change Towards Long Lifetime

High-Power Li-Metal Anode Enabled by Metal-Organic Framework Modified Electrolyte

Advances in the use of carbonaceous scaffolds for constructing stable composite Li metal anodes

Engineering a heteroatom-doped multidimensional carbon network for dendrite-free lithium metal anode

Advances of Carbon-Based Materials for Lithium Metal Anodes