Abstract:Aqueous rechargeable Ni‐Fe batteries featuring an ultra‐flat discharge plateau, low cost, and outstanding safety characteristics show promising prospects for application in wearable energy storage. In particular, fiber‐shaped Ni‐Fe batteries will enable textile‐based energy supply for wearable electronics. However, the development of fiber‐shaped Ni‐Fe batteries is currently challenged by the performance of fibrous Fe‐based anode materials. In this context, this study describes the fabrication of sulfur‐doped Fe2O3 nanowire arrays (S‐Fe2O3 NWAs) grown on carbon nanotube fibers (CNTFs) as an innovative anode material (S‐Fe2O3 NWAs/CNTF). Encouragingly, first‐principle calculations reveal that S‐doping in Fe2O3 can dramatically reduce the band gap from 2.34 to 1.18 eV and thus enhance electronic conductivity. The novel developed S‐Fe2O3 NWAs/CNTF electrode is further demonstrated to deliver a very high capacity of 0.81 mAh cm−2 at 4 mA cm−2. This value is almost sixfold higher than that of the pristine Fe2O3 NWAs/CNTF electrode. When a cathode containing zinc‐nickel‐cobalt oxide (ZNCO)@Ni(OH)2 NWAs heterostructures is used, 0.46 mAh cm−2 capacity and 67.32 mWh cm−3 energy density are obtained for quasi‐solid‐state fiber‐shaped NiCo‐Fe batteries, which outperform most state‐of‐the‐art fiber‐shaped aqueous rechargeable batteries. These findings offer an innovative and feasible route to design high‐performance Fe‐based anodes and may inspire new development for the next‐generation wearable Ni‐Fe batteries.

Ultra-long KFeS 2 nanowires grown on Fe foam as a high-performance anode for aqueous solid-state energy storage

Design of a porous cobalt sulfide nanosheet array on Ni foam from zeolitic imidazolate frameworks as an advanced electrode for supercapacitors.

High Areal Capacity FeS@Fe Foam Anode with Hierarchical Structure for Alkaline Solid‐State Energy Storage

ZnFe2O4-nanocrystal-assembled Microcages As an Anode Material for High Performance Lithium-Ion Batteries

Flexible all-solid-state fiber-shaped Ni–Fe batteries with high electrochemical performance

FeCo2O4 submicron-tube arrays grown on Ni foam as high rate-capability and cycling-stability electrodes allowing superior energy and power densities with symmetric supercapacitors.

Electrospun Na4Fe3(PO4)2(P2O7) nanofibers as free-standing cathodes for ultralong-life and high-rate sodium-ion batteries

3D heterogeneous ZnCo2O4@NiMoO4 nanoarrays grown on Ni foam as a binder-free electrode for high-performance energy storage

Spinel FeCo2S4 Nanoflower Arrays Grown on Ni Foam As Novel Binder-Free Electrodes for Long-Cycle-life Supercapacitors

Rational Construction of Self‐Standing Sulfur‐Doped Fe 2 O 3 Anodes with Promoted Energy Storage Capability for Wearable Aqueous Rechargeable NiCo‐Fe Batteries

In Situ Induced Interface Engineering in Hierarchical Fe3O4 Enhances Performance for Alkaline Solid-State Energy Storage

Ultrafast and durable Li/Na storage by an iron selenide anode using an elastic hierarchical structure

Self-standing Na-storage anode of Fe2O3 nanodots encapsulated in porous N-doped carbon nanofibers with ultra-high cyclic stability

MOF‐Derived Fe 7 S 8 Nanoparticles/N‐Doped Carbon Nanofibers as an Ultra‐Stable Anode for Sodium‐Ion Batteries

Extremely Stable Antimony–carbon Composite Anodes for Potassium-Ion Batteries

Ni3S2@MoS2 Core/shell Nanorod Arrays on Ni Foam for High-Performance Electrochemical Energy Storage

CuO@NiCoFe-S core–shell nanorod arrays based on Cu foam for high performance energy storage

Gas phase self-assembly of carbon confined Fe1−xS nanoparticles/exfoliated graphite composite with nano-/micro-structure for long-life anode of potassium-ion batteries

Ultrafast and ultrastable FeSe2 embedded in nitrogen-doped carbon nanofibers anode for sodium-ion half/full batteries

High Lithium Storage Performance of Fes Nanodots in Porous Graphitic Carbon Nanowires

FeCoS 2 polyhedral spherical nanoparticles decorated Nitrogen doped hollow carbon nanofibers as high-performance self-supporting anode for K-ion storage