Abstract:The problems of fossil-based resources and pollution caused by traditional nondegradable polymers have led to the need for biobased monomers and polyesters, presenting more environmentally friendly features. 2,5-Tetrahydrofurandimethanol (THFDM), a biobased monomer containing an aliphatic ring structure and an ether group, was introduced into the molecular chain of polybutylene succinate (PBS) as a sustainable unit to optimize its performance and improve its sustainability. The poly(butylene-co-tetrahydrofurandimethylene succinate) (PBTS) copolyesters were synthesized using a melt polycondensation method. The copolyesters exhibited relatively high intrinsic viscosity (1.03-1.71 dL/g). The T-g values of PBTS copolyesters increased significantly along with the introduction of THFDM (from -32.2 to -12.9 degrees C). According to the investigation using WAXD (wide-angle X-ray diffraction) analysis and successive self-nucleating annealing (SSA) measurement, it was revealed that the introduction of THFDM reduced the crystallization ability of PBTS while increasing its crystal content with relatively low lamella thickness. This phenomenon was mainly attributed to the aliphatic rings, which limited the movement and regular stacking of the molecular chains. The degradation rate and toughness of the copolyesters improved due to the decrease of crystallization degree. Meanwhile, the gas barrier property of PBTS slightly decreased but remained at a relatively high level. The permeabilities of O-2 and CO2 were lower than that of commercially available PBAT. In summary, the introduction of THFDM not only improved the biobased resources content and the sustainability of copolyesters but also improved the toughness and degradation performance without sacrificing gas barrier performance.

Biodegradable poly(butylene succinate‐co‐butylene furandicarboxylate): Effect of butylene furandicarboxylate unit on thermal, mechanical, and ultraviolet shielding properties, and biodegradability

Hydrolytic Degradation Of Biobased Poly(Butylene Succinate-Co-Furandicarboxylate) And Poly(Butylene Adipate-Co-Furandicarboxylate) Copolyesters Under Mild Conditions

Hydrolytic and Compost Degradation of Biobased PBSF and PBAF Copolyesters with 40–60 Mol% BF Unit

Mechanical and thermal properties of poly(butylene succinate)/plant fiber biodegradable composite

High Molecular Weight Poly(butylene Succinate-Co-furandicarboxylate) with 10 Mol% of BF Unit: Synthesis, Crystallization-Melting Behavior and Mechanical Properties

Biobased poly(butylene 2,5-furandicarboxylate) and poly(butylene adipate-co-butylene 2,5-furandicarboxylate)s: From synthesis using highly purified 2,5-furandicarboxylic acid to thermo-mechanical properties

Synthesis of Biodegradable Polyester–Polyether with Enhanced Hydrophilicity, Thermal Stability, Toughness, and Degradation Rate

Biodegradable Poly(butylene succinate) Copolyesters Modified by Bioresoured 2,5-Tetrahydrofurandimethanol

Synthesis and Properties of Biobased Multiblock Polyesters Containing Poly(2,5-furandimethylene Succinate) and Poly(butylene Succinate) Blocks

Biobased Poly(Butylene Furanoate) Modified by Some Aliphatic Diacids Toward Poly(Butylene Alkylene-co-furanoate) (PBXF) Series with Tunable Physical Properties and Biodegradability

Synthesis of Biobased Poly(butylene Furandicarboxylate) Containing Polysulfone with Excellent Thermal Resistance Properties

Bio-based poly(butylene diglycolate-co-furandicarboxylate) copolyesters with balanced mechanical, barrier and biodegradable properties: A prospective substitute for PBAT

Mechanical Properties and Crystallization Behavior of Poly(butylene Succinate) Composites Reinforced with Basalt Fiber

Design of Hydrolysis, Enzymatic and Soil‐Degradation Diglycolate‐Based Copolyesters With Good Mechanical and Thermal Properties

Synthesis and characterization of biobased poly(butylene adipate‐co‐furandicarboxylate) with excellent gas barrier properties

Development of poly(butylene oxalate-co-furanoate) copolymers with enhanced sustainability and hydrolytic degradability

Mechanical, Morphology, and Thermal Properties of Carbon Fiber Reinforced Poly(Butylene Succinate) Composites

Synthesis and Characterization of Biodegradable Poly(butylene Succinate‐co‐propylene Succinate)s

Poly(butylene Succinate) and Its Copolymers: Research, Development and Industrialization

Poly(1,4-butylene -co-1,4-cyclohexanedimethylene 2,5-furandicarboxylate) copolyester: Potential bio-based engineering plastic

Copolymerization with Polyether Segments Improves the Mechanical Properties of Biodegradable Polyesters