Abstract:Ammonia, as a carbon-free, hydrogen-rich and renewable fuel, is of great significance for building the zero- carbon emission energy supply system in the word. However, the drawbacks of high ignition energy and high NOx emissions limit its widespread application. Catalytic combustion provides a reliable option for NH3 combustion. In the study, the catalyst of Ag/CuOx@SiO2 catalyst with high-temperature catalytic activity was prepared, and the catalytic flow reactor was employed to evaluate the ability of the catalyst in enhancing NH3 oxidation and removal NOx during NH3-rich combustion with high temperature region (900 K similar to 1400 K) and wide equivalence ratio range (0.4 similar to 1.2). The high-temperature catalytic activity of the catalyst was proved by XPS spectrogram that the valence states of Ag and CuOx species in the catalyst have not been changed after the catalytic combustion. The results of catalytic combustion indicated that the catalyst enhanced the NH3 oxidation significantly. Compared to NH3 combustion, the temperature of 100 % NH3 conversion (T100) was decreased by over 500 K during NH3 catalytic combustion. Moreover, catalytic combustion performed higher efficiency on enhancing NH3 oxidation than the approach of co-firing NH3 with higher reactive gas fuels. The T-100 of NH3 catalytic combustion was lower by 200 K similar to 220 K than that of NH3/H-2 and NH3/CH4 combustion. Furthermore, the catalyst reduced the NOx effectively during NH3/H-2 and NH3/CH4 combustion. At 1400 K, NO selectivity during NH3/H-2 and NH3/CH4 catalytic combustion reduced by 86.80 %similar to 90.42 % and 43.61 %similar to 61.42 % compared to the combustion, respectively. Additionally, the peak of N2O selectivity moved to lower temperature range during catalytic combustion. Especially in stoichiometric and fuel rich conditions, the peak temperature reduced by 100 K similar to 200 K. The study provided references for the development of catalysts in ammonia-rich fuel catalytic combustion.

NO hydrogenation to NH3 over FeCu/TiO2 catalyst with improved activity

Regulating Intermediate Adsorption and H2O Dissociation on a Diatomic Catalyst to Promote Electrocatalytic Nitrate Reduction to Ammonia

Fe/Cu diatomic catalysts for electrochemical nitrate reduction to ammonia

Enhancement of Low-Temperature Catalytic Activity over a Highly Dispersed Fe–Mn/Ti Catalyst for Selective Catalytic Reduction of NOx with NH3

Enhanced Nitrate-to-Ammonia Conversion through Ag-Cu-P Catalyst for Sustainable Ammonia Generation under Ambient Conditions

Effect of Fe Reduced-Modification on TiO 2 Supported Fe–Mn Catalyst for NO Removal by NH 3 at Low Temperature

Highly dispersed V2O5/TiO2 modified with transition metals (Cu, Fe, Mn, Co) as efficient catalysts for the selective reduction of NO with NH3

Preventing Nitrite Desorption via Switching Hydrogenation Position: A Dual‐Site Approach for Selective Nitrate Reduction to Ammonia

Effect of Fe reduced-modification on TiO2 supported Fe–Mn catalyst for NO removal by NH3 at low temperature

Hydrogenation of NO x into ammonia under ambient conditions: from mechanistic investigation to multiphase catalysis

Electrocatalytic Hydrogenation Boosts Reduction of Nitrate to Ammonia over Single-Atom Cu with Cu(I)-N3C1 Sites.

Improving the NH3 Oxidation and Removing NOx During Ammonia-Rich Fuel Catalytic Combustion Using the Ag/CuOx@SiO2 Catalyst with High-Temperature Catalytic Activity

Electrocatalytic Reduction of Nitrate to Ammonia over Activated Carbon-Supported Copper-Iron Bimetallic Catalyst Synthesized by Hydrothermal Co-Precipitation Method

Enhanced Nitrate-to-Ammonia Activity on Copper-Nickel Alloys Via Tuning of Intermediate Adsorption

Activity enhancement of WO3 modified FeTiO catalysts for the selective catalytic reduction of NO by NH3

Selective Catalytic Reduction of NO with NH3 over HZSM-5-supported Fe–Cu Nanocomposite Catalysts: the Fe–Cu Bimetallic Effect

Co-Ni bimetallic oxide with tuned surface oxygen vacancies efficiently electrocatalytic reduction of nitrate to ammonia

Theoretical Insights into Nitrate Reduction to Ammonia over Pt/TiO2: Reaction Mechanism, Activity Regulation, and Catalyst Design

Theoretical Insights into Nitrate Reduction to Ammonia over Pt/TiO 2 : Reaction Mechanism, Activity Regulation, and Catalyst Design

Cu-Doped Iron Oxide for the Efficient Electrocatalytic Nitrate Reduction Reaction.

F-doped Cu-Fe Oxide nanosheets for effective electrocatalytic reduction of Nitrate to Ammonia