Abstract:This work aims to find the benefits, limitations, and costs (in terms of plasma energy and NO x emissions) of plasma-assisted ignition-stabilized combustion (PAISC). The experiments are performed on a custom-made methane-air jet flame burner with two coaxial flow inlets. Dielectric barrier discharge (DBD) configuration is set up in the outer flow channel which acts as four ignition sources. The DBDs are operated by bursts of positive voltage pulses of 10 ns duration and 24 kV amplitude. In this way, four ignition kernels are created in flow simultaneously. The ignited kernels expand while blowing out with the flow which is followed by new ignition kernel initiation during the next burst. This cycle is repeated continuously and complete burning of the fuel is ensured by proper interactions between ignited kernels. The PAISC dynamics are visualized using OH* chemiluminescence images captured at 10 kHz framerate. Along with visualization measurements, we measure CO and NO x emissions using an industrial gas analyzer. The gas analyzer measurements are complemented by two-photon laser-induced fluorescence (TALIF) measurements of CO. We find the optimal plasma parameters to optimize CO, and NO x emissions and the effective flame length. A parametric study for various flow parameters is performed and combustion operation regimes are identified. The main highlight of this work is quasi-complete combustion at flow speeds of up to 4 times the blowout flow speed, which costs less than 10 ppm@3%O 2 plasma-produced NO x and has a plasma energy consumption of less than 1% of the combustion heat release. Novelty and Significance Statement Various researchers have demonstrated plasma's ability to enhance combustion at near-lean-blowout limits in the past. This work presents a novel plasma-assisted ignition stabilized combustion (PAISC) strategy to achieve quasi-complete combustion at flow speeds much above blowout flow speeds. Pulsed dielectric barrier discharge plasma is used to ignite methane-air flow as it is a fast, repetitive, and energy-efficient ignition source. We study PAISC dynamics using high-speed visualization along with CO, NO x emissions, and plasma energy for various plasma and flow parameters. From these analyses, we optimize plasma parameters first and then discuss the benefits, limitations, and costs of PAISC at optimal plasma conditions. We believe that the presented strategy will motivate future combustor design with a wider range of operability, especially for high-speed propulsion applications.

Design of a plasma-assisted injector: Principle, characterization and application to supersonic combustion of hydrogen

Stabilization regimes and pollutant emissions from a dual fuel CH4/H2 and dual swirl low NOx burner

Dual-fuel, dual-swirl burner for the mitigation of thermoacoustic instabilities in turbulent ammonia-hydrogen flames

Computational Study of Hydrogen Direct Injection for Internal Combustion Engines

A numerical investigation of plasma-assisted ignition by a burst of nanosecond repetitively pulsed discharges

Effect of the Plasma Jet Ignition and Flame Kernel Under The Combustion Process in a Constant Volume Combustion Chamber

A repetitive pulsed electrothermal plasma jet ignition system based on capillary discharge

Computational Study of Fluidic-Valve Injectors for Detonation Engines

A supersonic gas injection system for fuelling and probing fusion plasmas

Hydrogen direct injection: Optical investigation of premixed and jet-guided combustion modes

Experimental Investigation on Flow Characteristics and Ignition Performance of Plasma-Actuated Flame Holder

Characterizing and visualizing the direct injection of hydrogen into high-pressure argon and nitrogen environments

Direct Liquid Reactor-Injector of Nanoparticles: A Safer-by-Design Aerosol Injection for Nanocomposite Thin-Film Deposition Adapted to Various Plasma-Assisted Processes

Experimental investigation of flow field features and spark ignition process in a multi-swirl airblast injector

Laser-induced plasma-ignited hydrogen jet combustion in engine-relevant conditions

Plasma-assisted ignition-stabilized combustion (PAISC): Benefits, limitations, and costs

Experimental Study on the Working Characteristics of a Pre-combustion AC Plasma Jet Igniter

Numerical study of nitrogen oxides chemistry during plasma assisted combustion in a sequential combustor

Physics and chemistry of plasma-assisted combustion

Ignition Enhancement of Lean Kerosene Air Mixture by Multichannel Jet Enhanced Plasma Igniter