Abstract:Silver nanowires (Ag NWs) are highly promising building blocks for developing transparent conducting films (TCFs) due to their high electrical conductivity and good optical transparency. The large-scale production of Ag NW-based high-quality TCFs using low-cost processing methods can replace the traditional oxide based TCFs. Therefore, developing a reliable technique for large-scale fabrication of Ag NW-based TCFs is vital. This work involves the synthesis of Ag NWs, the fabrication of large-area Ag NW-based TCFs using a simple rod coating process, its optimization, and the performance analysis of the fabricated TCFs, including their demonstration as transparent heaters. The polyol synthesis method produces Ag NWs of lengths ranging from 25 – 110 μm and diameters from 80 – 180 nm. The effect of Ag NW length, the number of coating passes, and the volume of the NW dispersion used per coating pass on the electrical and optical properties of the TCFs are studied by quantifying sheet resistance (Rs) and transmittance (T) of the film. The performance of the fabricated film is evaluated by estimating the figure of merit (FoM) in both percolative and bulk regimes. The TCF made with NWs of length 25.7 μm and diameter 85.1 nm had the largest value of bulk FoM (101.3), percolative FoM (43.9), and, conductivity exponent (0.6). This elucidated the superior performance of the fabricated TCFs over those fabricated by other techniques. The critical thickness of the film (tmin), at the crossover between the percolation and bulk, scales with the shortest dimension of the NW, namely its diameter. The percolative FoM showed an increase, with a decrease in both sheet resistance and diameter of the NWs, with lower n. The fabricated TCF is tested as a transparent heater and the demonstration proves that rod coated Ag NW-based TCFs can be used for transparent electrode applications.

The preparation of shear coating for silver nanowire transparent conductive films and its electrical performance anisotropy

Tackling the Stability Issues of Silver Nanowire Transparent Conductive Films through FeCl3 Dilute Solution Treatment

Conductivity Enhancement of Silver Nanowire Networks Via Simple Electrolyte Solution Treatment and Solvent Washing

Coating-free, air-stable silver nanowires for high-performance transparent conductive film

Structural Regulation of Silver Nanowires and Their Application in Flexible Electronic Thin Films

Annealing-Free and Strongly Adhesive Silver Nanowire Networks with Long-Term Reliability by Introduction of A Nonconductive and Biocompatible Polymer Binder

Enhanced stability of silver nanowire transparent conductive films against ultraviolet light illumination

Investigating the optical and electrical performance of rod coated silver nanowire-based transparent conducting films

Cohesively Enhanced Electrical Conductivity and Thermal Stability of Silver Nanowire Networks by Nickel Ion Bridge Joining

Centrifugal Inertia-Induced Directional Alignment of AgNW Network for Preparing Transparent Electromagnetic Interference Shielding Films with Joule Heating Ability

Strongly Anisotropic Thermal and Electrical Conductivities of Self-assembled Silver Nanowire Network

Multilayer directionally arranged silver nanowire networks for flexible transparent conductive films

Scalable coating and properties of transparent, flexible, silver nanowire electrodes

Improvement of the Conductivity of Silver Nanowire Film by Adding Silver Nano-Particles

Preparation and characterization of electrospun silver nanowires/ZnO/PVP composite transparent conductive film

A facile method for preparing transparent, conductive, and paper-like silver nanowire films

Improved Electrical Conductivity of Silver Nanowire Film by Adding Silver Nanoparticles

Electrodeposition Fabrication of Cu@Ni Core Shell Nanowire Network for Highly Stable Transparent Conductive Films

Large Scale Preparation of Silver Nanowires with Different Diameters by a One-pot Method and Their Application in Transparent Conducting Films

Strongly Anisotropic Thermal and Electrical Conductivities of a Self-Assembled Silver Nanowire Network

Optimizing silver nanowire dimensions by the modification of polyol synthesis for the fabrication of transparent conducting films