Abstract:Gel polymer electrolyte films (GPEs) based on polyacrylonitrile (PAN) complexed with NaF salt and an Al2O3 nanofiller were prepared via solution cast method. Structural studies were performed to investigate the order of conductivity under the influence of salt and nanofillers. The prepared films were characterized using energy dispersive x-ray spectrometry (EDS) to determine the chemical composition in wt%. EDS studies reveal that PAN–NaF with Al2O3 ceramic filler decreases the degree of crystallinity with increasing concentration of the nanofiller. The UV–Vis spectrum was recorded by a Hewlett-Packard HP8452A diode array spectrometer. The structural effect of salt and nanoparticles on the conductivity was also confirmed by UV–Vis spectroscopy. The mechanical properties of the prepared polymer electrolytes were determined using a Universal Tensile Machine (Instron Model 5565, Canada) with a constant crosshead speed of 10 mm/min. The addition of nanoparticles increased both the modulus and the strength of the polymer nanocomposites. Both the tensile strength and Young’s modulus increased with increasing functionalized nanoparticle loading. The change in transition temperature caused by the incorporation of the Al2O3 nanofiller and plasticizer into the PAN+NaF complex was studied by differential scanning calorimetry (DSC) analysis. Additionally, DSC thermograms were recorded to measure the glass transition temperature and melting temperature of PAN-based electrolytes using a Mettler instrument. Conductivity studies were carried out for all the prepared polymer electrolytes to understand the conduction mechanism. The role of the ceramic phase is to reduce the melting temperature, which is ascertained from DSC. The sample containing PAN:NaF (70:30) exhibits the highest conductivity of 1.82 x 10−4 S cm−1 at room temperature (303 K) and 2.96 x 10−3 S cm−1 at 378 K. The polymer electrolytes considered in the present study exhibited an Arrhenius type of conduction. The polymer electrolyte containing 3 wt% Al2O3 nanofiller showed an ionic conductivity of 5.96 × 10−3 S cm−1. To determine transfer numbers, Wagner’s polarization method can be used. From these studies, it is observed that the conduction mechanism is predominantly due to ions. Using this (PAN–NaF– Al2O3) (70:30:3) electrolyte, a solid-state electrochemical cell was fabricated, and its discharge profiles were studied under a constant load of 100 kΩ. Finally, several cell profiles associated with this cell were evaluated and reported.

Research progress on polyacrylonitrile-based polymer electrolytes for electrochemical devices: Insight into electrochemical performance

Insights into the use of polyepichlorohydrin polymer in lithium battery energy storage/conversion devices: review

Research progress in stable interfacial constructions between composite polymer electrolytes and electrodes

High-voltage polymer electrolytes: challenges and progress

Electrospun Polyacrylonitrile (PAN)-Based Polymer Gel Electrolytes for Lithium-Ion Batteries

Review—Polymer Electrolytes for Rechargeable Batteries: From Nanocomposite to Nanohybrid

Research Progress and Application of PEO-Based Solid State Polymer Composite Electrolytes

Gel Polymer Electrolytes for Electrochemical Energy Storage

Research Progress on Applications of Polyaniline (PANI) for Electrochemical Energy Storage and Conversion

Advanced Electrochromic Energy Storage Devices Based on Conductive Polymers

Biopolymer‐based gel electrolytes for electrochemical energy Storage: Advances and prospects

Design of Poly(Acrylonitrile)-Based Gel Electrolytes for High-Performance Lithium Ion Batteries

Polyaniline (pani) Based Electrode Materials for Energy Storage and Conversion

Dendritic Solid Polymer Electrolytes: A New Paradigm for High‐Performance Lithium‐based Batteries

Advances in host selection and interface regulation of polymer electrolytes

Safety-Enhanced Polymer Electrolytes for Sodium Batteries: Recent Progress and Perspectives

Momentous past and key advancements in ionic liquid mediated polymer electrolyte for application in energy storage

Polyacrylonitrile-based gel polymer electrolytes for dye-sensitized solar cells: a review

Progress on High Voltage PEO-based Polymer Solid Electrolytes in Lithium Batteries

Structural, Optical, and Electrical Studies of PAN-Based Gel Polymer Electrolytes for Solid-State Battery Applications

Polymer‐Based Solid Electrolytes: Material Selection, Design, and Application