Abstract:This work proposes a wide‐temperature localized high‐concentration electrolytes (LHCE) with a high safety feature. A particular electrolyte additive of the electrolytes, 1‐fluoroethyl methyl carbonate (1FEMC), is explored to improve the performance of electrolytes with a better interfacial stability than the previously reported multifunctional additive (4,5‐difluoro‐1,3‐dioxolan‐2‐one DFEC). The 1FEMC achieves an inorganic‐dominated solid electrolyte interphase at both cathode and anode, which leads to an uniform lithium deposition and inhibits the electrolyte decomposition as well as cathode degradation. This LHCE achieves over 300 stable cycles for both LiNi0.9Mn0.05Co0.05O2||Li cells and LiCoO2||Li cells, as well as 50 cycles for LiNi0.8Mn0.1Co0.1O2 (NCM811||Li) pouch cells. Additionally, NCM811||Li cells maintains 84% discharge capacity at −20 °C (compared with that at room temperature). This work presents a research foundation for designing safer Li‐metal batteries that operate in a wide temperature range. The increasing need for energy storage devices with high energy density has led to significant interest in Li‐metal batteries (LMBs). However, the use of commercial electrolytes in LMBs is problematic due to their flammability, inadequate performance at low temperatures, and tendency to promote the growth of lithium dendrites and other flaws. This study introduces a localized high‐concentration electrolyte (LHCE) that addresses these issues by employing non‐flammable electrolyte components and incorporating carefully designed additives to enhance flame retardancy and low‐temperature performance. By incorporating additives to optimize the electrolyte, it is possible to attain inorganic‐dominated solid electrolyte interphases on both the cathode and anode. This achievement results in a uniform deposition of lithium, as well as the suppression of electrolyte decomposition and cathode deterioration. Consequently, this LHCE achieve over 300 stable cycles for both LiNi0.9Mn0.05Co0.05O2||Li cells and LiCoO2||Li cells, as well as 50 cycles for LiNi0.8Mn0.1Co0.1O2 (NCM811||Li) pouch cells. Furthermore, NCM811||Li cells maintain 84% discharge capacity at −20 °C, in comparison to the capacity at room temperature. The utilization of this electrolyte presents novel perspectives for the safe implementation of LMBs.

Thermally Stable Polymer‐Rich Solid Electrolyte Interphase for Safe Lithium Metal Pouch Cells

Electrochemically and Thermally Stable Inorganics-Rich Solid Electrolyte Interphase for Robust Lithium Metal Batteries.

Intrinsically Safe Lithium Metal Batteries Enabled by Thermo-Electrochemical Compatible In Situ Polymerized Solid-State Electrolytes

Constructing thermo-responsive polysiloxane shields via lithium initiation to inhibit thermal runaway of lithium metal batteries

Host–Guest Interactions for Electrochemically Stable and Thermally Safe Lithium Metal Batteries

Nonflammable electrolyte with low exothermic design for safer lithium-based batteries

Rapid Thermal Shutdown of Deep‐Eutectic‐Polymer Electrolyte Enabling Overheating Self‐Protection of Lithium Metal Batteries

A Flame-Retardant Polymer Electrolyte for Safe and Long-Life Lithium Metal Battery

Achieving Uniform Li Deposition and Suppressed Electrolyte Flammability in Li‐Metal Batteries via Designing Localized High‐Concentration Electrolytes

In Situ Fabricated Non‐Flammable Quasi‐Solid Electrolytes for Li‐Metal Batteries

Electrospinning Fiber Membrane‐Derived Gel Polymer Electrolytes with High Mechanical Strength and Low Swelling Effect for High‐Safety Lithium Metal Batteries

Bidirectional Interphase Modulation of Phosphate Electrolyte Enables Intrinsic Safety and Superior Stability for High-Voltage Lithium-Metal Batteries.

Nonflammable Polyfluorides‐Anchored Quasi‐Solid Electrolytes for Ultra‐Safe Anode‐Free Lithium Pouch Cells Without Thermal Runaway

Thermoresponsive Electrolytes for Safe Lithium-Metal Batteries

Fireproof Solid Polymer Electrolyte with Chemically Bonded Phosphorus Toward Stable and Safe Lithium‐Metal Battery

A safe anode-free lithium metal pouch cell enabled by integrating stable quasi-solid electrolytes with oxygen-free cathodes

In-situ encapsulating flame-retardant phosphate into robust polymer matrix for safe and stable quasi-solid-state lithium metal batteries

An Intrinsically Nonflammable Electrolyte for Prominent‐Safety Lithium Metal Batteries with High Energy Density and Cycling Stability

In-Situ synthesized Non-flammable gel polymer electrolyte enable highly safe and Dendrite-Free lithium metal batteries

Flame retardant polyurethane acrylate solid polymer electrolyte based on the synergistic effect of modified halloysite nanotubes for safe lithium batteries

An Electrode‐Crosstalk‐Suppressing Smart Polymer Electrolyte for High Safety Lithium‐Ion Batteries