Abstract:As the primary rock-breaking tool of the tunnel boring machine (TBM), the disc cutter experiences significant wear from the immense cutting load. Given the intricate geological conditions in TBM excavation, accurately assessing the extent of wear on disc cutters solely through experience and predictive models is challenging. Therefore, implementing synchronous wear monitoring when a disc cutter breaks rock to accurately assess the amount of wear on the disc cutter and determine the point at which a tool change is needed is extremely important. In this work, a disc cutter wear test system is designed on the basis of the principle of eddy current testing and the variation in disc cutter wear during cutting is revealed through experiments. The radial reduction rate ( D r ) is used as an index of disc cutter wear to analyze the variations in penetration, cutting speed, the cutting resistance coefficient ( C c ), and specific energy consumption (SE) in relation to disc cutter wear. The experimental results indicate that the measurement error of the disc cutter wear testing system is 8.6%, which allows disc cutter wear level to be obtained. With increasing cutting displacement, the D r of the disc cutter first increases rapidly but then slows. The C c of the disc cutter increases exponentially with increasing D r under different penetration depths. When the cutting displacement of the disc cutter reaches 40 m, D r exhibits an exponential growth trend with increasing cutting speed. The critical value of D r is 0.084. When D r exceeds this value, the cutting performance exhibits a sharp increase in torque, which significantly impacts the driving efficiency. The research results of this paper provide a reference for creating a disc cutter replacement plan and extending the service life of the disc cutter.

Identification of Disc Cutter Wear via Operation Parameters Combined With Vibration Data: A Case Study

Development of a Real-Time Monitoring and Calculation Method for TBM Disc-Cutter's Cutting Force in Complex Ground

The energy method to predict disc cutter wear extent for hard rock TBMs

A New Strategy for Disc Cutter Wear Status Perception Using Vibration Detection and Machine Learning

A field parameters-based method for real-time wear estimation of disc cutter on TBM cutterhead

Identification of Cutter Flat Wear for Rock TBMs Using Vibration Signal of Shield

Identification and Optimization of Energy Consumption by Shield Tunnel Machines Using A Combined Mechanical and Regression Analysis

Enhanced Wear Prediction of Tunnel Boring Machine Disc Cutters for Accurate Remaining Useful Life Estimation Using a Hybrid Model

A Gene Expression Programming-Based Method for Real-Time Wear Estimation of Disc Cutter on TBM Cutterhead

Experimental Study on Partial Wear of TBM Disc Cutter

Prediction model for disc cutter wear during hard rock breaking based on plastic removal abrasiveness mechanism

Design of Disc Cutter Wear Test System and Research on Wear Law Based on Eddy Current Testing Technology

A New Index for Cutter Life Evaluation and Ensemble Model for Prediction of Cutter Wear

Prediction Model of Tunnel Boring Machine Disc Cutter Replacement Using Kernel Support Vector Machine

Disc Cutter Wear Monitoring System Based on BP Neural Network

Machine learning-based prediction model for disc cutter life in TBM excavation through hard rock formations

Prediction Model for TBM Disc Cutter Wear in Mixed-face Ground Condition

Prediction of disc cutter failure in shield tunnelling in mixed-face ground condition

Online Monitoring Device of Disc Cutter Wear – Design and Field Test

Study on Wear Prediction of Shield Disc Cutter in Hard Rock and Its Application