Abstract:In an isobaric test, typically used for establishing the transformation temperatures of SMAs, a specimen is taken through a cool/heat cycle at a prescribed stress level. The companion paper, Part I, demonstrated that such tests on NiTi tubes result in rather complex interactions between the helical bands of localized deformation induced by phase transformations, the associated latent heat, and the thermal exchange with the environment. These interactions were quantified using accurately controlled testing conditions and full-field diagnostics, and provide a challenging platform for evaluating analyses. In Part II this challenge is met by first extending the thermomechanical constitutive framework developed by our group to include variations of transformation stress, strain, and latent heat with temperature. Unique features of the model include: modeling the reversible phase transformations of NiTi through a single surface in the deviatoric stress–temperature space with the transformation strain and entropy as the internal variables; and use of softening to model the inhomogeneous deformation exhibited in tension. The model is calibrated to the isothermal results of Part I. The constitutive model is then incorporated into a fully coupled static displacement-thermally transient finite element analysis that is used to simulate the isobaric experiments on NiTi tubes of Part I over a range of stresses. The clamped ends of the experiment are idealized as radial constraints. Heat exchange between the structure and the environment is strictly by convection. Isobaric testing is simulated by taking the model tube through the cool/heat cycle of the experiment at the prescribed stress level. A small thickness depression at one of the ends is used to initiate localized transformation. The temperature-strain response is reproduced with the two transformations initiating at essentially the same temperatures as in the experiments, producing the correct transformation strains for all stress levels. Transformation of M propagates via a helical band at similar speeds as in the experiments, while transformation of A is via multipronged fronts for all cases. Successful reproduction of the velocities of the banded transformations is governed by the value of the convection coefficient. Overall, the reproduction of the isobaric experiments over a range of stress levels, validates the constitutive and structural models. It also points to the limitations of modeling the heat exchange between the specimen and the environment only by convection.

Thermomechanics of phase transformation induced localization in NiTi tubes. Part II constitutive modeling and simulations

Thermomechanics of phase transformation induced localization in NiTi tubes. Part I experiments

Modifying macroscale variant combinations in a two-dimensional structure using mechanical loadings during thermally induced transformation

Propagation of Phase Transformation Fronts in Pseudoelastic NiTi Tubes under Uniaxial Tension

Modeling of Propagation of Phase Transformation Fronts in NiTi under Uniaxial Tension

Thermomechanical model for NiTi-based shape memory alloys covering macroscopic localization of martensitic transformation

Thermomechanical modeling on cyclic deformation and localization of superelastic NiTi shape memory alloy

Nonlocal modeling and analysis of spatiotemporal patterns in non-isothermal phase transformation of NiTi strips

Micromechanical Modelling on Thermomechanical Coupling of Superelastic NiTi Alloy

Bending of Pseudoelastic NiTi Tubes

Stress induced martensitic transformation in NiTi at elevated temperatures: martensite variant microstructures, recoverable strains and plastic strains

Efficient phase-field simulation for linear superelastic NiTi alloys under temperature gradients

Regularities in the Evolution of Thermoelastic Martensitic Transformations during Cooling/Heating in the Free State and under Load of Titanium Nickelide Alloyed with Niobium

Beyond the strain recoverability of martensitic transformation in NiTi

Thermomechanical coupling in cyclic phase transition of shape memory material under periodic stressing—experiment and modeling

In situ X-ray diffraction strain-controlled study of Ti–Nb–Zr and Ti–Nb–Ta shape memory alloys: crystal lattice and transformation features

Rate-dependent cyclic deformation of super-elastic NiTi shape memory alloy: Thermo-mechanical coupled and physical mechanism-based constitutive model

Atomic scale modeling of the coherent strain field surrounding Ni4Ti3 precipitate and its effects on thermally-induced martensitic transformation in a NiTi alloy

Thermo-mechanically coupled deformation of pseudoelastic NiTi SMA helical spring

Comparative Study of Two Multiscale Thermomechanical Models of Polycrystalline Shape Memory alloys: Application to a Representative volume Element of Titanium-Niobium