Abstract:12 SU8 is a negative resist which is widely used for the fabrication of micron scale lateral 13 features over a wide range of heights using photolithographic methods. This has been extensively 14 used as a method to produce surface structure to which hydrophobicity can be added and a model 15 super-water repellent surface of achieved. However, such an approach requires at least two-steps 16 and does not embed the desired properties as part of the structure itself or create multiple levels 17 of topographical structure. In other applications, a variety of inclusions have previously been 18 studied to tailor the properties of SU8. In this work we report an approach to, and results from, 19 incorporating inclusions, in our case glass beads, of different wettabilities into the SU8 structures 20 produced by photolithography. In particular, we focus on ridge structures expected to be of use 21 in flow systems as drag reducing surfaces. We used scanning electron microscopy and 22 profilometry to investigate how the inclusion of either hydrophobic or hydrophilic glass beads 23 (sieve size of 20-30 μm) affects the definition of the structures formed and contact angle 24 goniometry to define what effect such inclusions has on the wettability of the SU8 composite 25 structure. It was found that the inclusion of hydrophobic glass beads in the SU8 resist resulted in 26 poorly defined structures compared to both SU8 on its own and SU8 to which hydrophobic glass 27 beads were added. In contrast, inclusion of hydrophilic glass beads resulted in a well-defined 28 ridge structure with the majority of the beads located in the ‘valleys’. Both EDX analysis and 29 contact angle data indicated that the surface chemistry of the beads themselves (both the 30 hydrophobic and hydrophilic beads) were masked by the SU8. Counter-intuitively, the inclusion 31 of hydrophobic beads in the SU8 composite resin resulted in ridges with increased wettability, 32 compared to SU8 ridges, as opposed to the inclusions of hydrophilic beads that resulted in 33 surfaces with increased effective hydrophobicity . 34 35

Suspension of Nanoparticles in SU-8 and Characterization of Nanocomposite Properties

Poly(methyl Methacrylate)-Decorated Single Wall Carbon Nanotube/epoxy Nanocomposites with Re-Agglomeration Networks: Rheology and Viscoelastic Damping Performance

Synthesis, characterization and applications of some nanomaterials

Deformation and Fracture Behavior of Electrocodeposited Alumina Nanoparticle/Copper Composite Films

Nano-scale characterization of the formation of silver layers during electroless deposition on polymeric surfaces

Exploring the Challenges of Characterising Surface Topography of Polymer-Nanoparticle Composites

PDMS/TiO2 and PDMS/SiO2 Nanocomposites: Mechanical Properties' Evaluation for Improved Insulating Coatings

Lithographically fabricated SU 8 composite structures for wettability control 1

Electrical conductivity of multi-walled carbon nanotubes-SU8 epoxy composites

Synthesis of Metal/SU-8 Nanocomposites through Photoreduction on SU-8 Substrates

Characterization of the polymerization of SU-8 photoresist and its applications in micro-electro-mechanical systems (MEMS)

Fabrication and Electrical Properties Analysis of Swcnts/Pdms Composites

Improving the stability of multiwalled carbon nanotube/silicone rubber composites strain sensors by nanosilica

Development of Novel SU-8 Based Nanoimprint Lithography

Molecular Dynamics Study on the Sintering Mechanism and Tensile Properties of Novel Cu Nanoparticle/Graphene Nanoplatelet Composite Solder Paste

Testing, Experimental Design, and Numerical Analysis of Nanomechanical Properties in Epoxy Hybrid Systems Reinforced with Carbon Nanotubes and Graphene Nanoparticles

Mechanical Strength and Interfacial Failure Analysis of Cantilevered SU-8 Microposts

Nonchemically Amplified Molecular Resists Based on Sulfonium-Functionalized Sulfone Derivatives for Sub-13 nm Nanolithography

Characterizing polydimethylsiloxane–carbon nanotubes composites manufactured using material extrusion additive technology: A rheological and mechanical analysis

The Nanomechanical Behavior of a Graphite Nanoplatelet/polycarbonate Nanocomposite

Influence of nanoparticle size on the mechanical and tribological characteristics of TiO 2 reinforced epoxy composites