Abstract:Liquid water within the cathode Gas Diffusion Layer (GDL) and Gas Channel (GC) of Proton Exchange Membrane Fuel Cells (PEMFCs) is strongly coupled to gas transport properties, thereby affecting the electrochemical conversion rates. In this study, the GDL and GC regions are utilized as the simulation domain, which differs from previous studies that only focused on any one of them. A Volume of Fluid (VOF) method is adopted to numerically investigate the two-phase flow (gas and liquid) behavior, e.g., water transport pattern evolution, water coverage ratio as well as local and total water saturation. To obtain GDL geometries, an in-house geometry-based method is developed for GDL reconstruction. Furthermore, to study the effect of GDL carbon fiber diameter, the same procedure is used to reconstruct three GDL structures by varying the carbon fiber diameter but keeping the porosity and geometric dimensions constant. The wall wettability is introduced with static contact angles at carbon fiber surfaces and channel walls. The results show that the GDL fiber microstructure has a significant impact on the two-phase flow patterns in the cathode field. Different stages of two-phase flow pattern evolution in both cathode domains are observed. The liquid water in the GDL experiences water invasion, spreading, and rising, followed by the droplet breakthrough in the GDL/GC interface. In the GC, the water droplets randomly experience accumulation, combination, attachment, and detachment. Due to the difference in surface wettability, the water coverage of the GDL/GC interface is smaller than that of the channel side and top walls. It is also found that the water saturation inside the GDL stabilizes after the water breakthrough, while local water saturation at the interface keeps irregular oscillations. Last but not the least, a water saturation balance requirement between the GDL and GC is observed. In terms of varying fiber diameter, a larger fiber diameter would result in less water saturation in the GDL but more water in the GC, in addition to faster water movement throughout the total domain.

A comparative study of streamlined flow channels with water drop block configurations and their effects on temperature profiles, mass transport characteristics, and performance in PEM fuel cell

Effects of Microstructure on Water Removal in the U-Shaped Region of PEMFC Serpentine Flow Channel

Improved flow field design for air-cooled proton exchange membrane fuel cells

The Investigation of Flow Channel Design on the Performance of PEM Fuel Cell

A parametric numerical study on the performance of polymer electrolyte membrane fuel cell with intermediate‐blocked interdigitated flow field designs

Numerical study on heat and mass transfer characteristics of a novel cooling channel in PEM fuel cell

Numerical Study of Cell Performance and Local Transport Phenomena in Pem Fuel Cells with Various Flow Channel Area Ratios

Investigation on performance of full-scale proton exchange membrane fuel cell: Porous foam flow field with integrated bipolar plate/gas diffusion layer

Numerical Analysis of Parallel Flow Fields Improved by Micro-Distributor in Proton Exchange Membrane Fuel Cells

Numerical Investigation of Tapered Flow Field Configurations for Enhanced Polymer Electrolyte Membrane Fuel Cell Performance

Numerical Comparative Investigating of PEMFC with Novel Hybrid Zigzag Channels: Reaction, Transport and Drainage Enhancements

Enhancing Heat Removal and H2O Retention in Passive Air-Cooled Polymer Electrolyte Membrane Fuel Cells by Altering Flow Field Geometry

Optimization of variable cross-sectional flow channel parameters for fuel cells: Numerical analysis and distributional uniformity evaluation

Evaluation of performance and mass transfer characteristics by applying oblique fin flow field to air-cooled PEMFCs under different ambient conditions

Enhanced water management in PEMFC cathode using streamlined baffles

Two-phase flow dynamics study in the trapezoidal gas channel of PEM fuel cell based on lattice Boltzmann model

Optimization of channel dimensions and gas diffusion layer thickness based on mass transfer characteristics of proton exchange membrane fuel cell

Performance investigation on a novel 3D wave flow channel design for PEMFC

Design of Flow Fields for High-Temperature PEM Fuel Cells Using Computational Fluid Dynamics

Numerical simulation of two-phase flow in gas diffusion layer and gas channel of proton exchange membrane fuel cells

Optimal design of locally improved structure for enhancing mass transfer in PEMFC cathode flow field