Construction of Heterostructured Sn/TiO 2 /Si Photocathode for Efficient Photoelectrochemical CO 2 Reduction

Chengjin Li,Xiaoxia Zhou,Qingming Zhang,Yi Xue,Zhaoyu Kuang,Han Zhao,Chung‐Yuan Mou,Hangrong Chen

DOI: https://doi.org/10.1002/cssc.202200188

IF: 8.4

2022-03-23

ChemSusChem

Abstract:ChemSusChem, Accepted Article.

chemistry, multidisciplinary,green & sustainable science & technology

What problem does this paper attempt to address?

Construction of CuInS2/C/TiO2 hierarchical tandem heterostructures with optimized CO2 photoreduction under visible light

Wei Bi,Ling Zhang,Hao Jiang,Chunzhong Li,Yanjie Hu

DOI: https://doi.org/10.1016/j.cej.2021.133679

IF: 15.1

2022-04-01

Chemical Engineering Journal

Abstract:The precise regulation of the nano-catalyst structure is a big challenge that limits the application of photocatalytic technology in CO2 reduction. Herein, to improve the utilization of sunlight, the separation and transfer efficiency of photogenerated electron-hole pairs, and the surface catalytic reaction process, CuInS2/C/TiO2 (CIS/C/T) hierarchical tandem heterostructure have been rationally designed. Multiple in-situ characterizations and DFT simulations show that CQDs not only act as a co-catalyst, but also act as a bridge between TiO2 (T) and CuInS2 (CIS), which further attribute to the efficient separation and enrichment of photogenerated electron-hole pairs while effectively avoiding the recombination. In consideration of the excellent broad-spectrum absorption, the CO2-to-CO photoreduction performance of the optimal CIS/C/T reaches up to 7.73 μmol g-1h−1, about 3.16 times enhancement of C/T. Combined with in-situ DRIFTs, the intrinsic structure–activity relationship is pointed out, and extended to other similar TiO2-based catalytic systems (In2S3/C/TiO2). This work will provide a new universal strategy for the design and synthesis of high-performance nano-photocatalysts.

engineering, chemical, environmental
Ultra-fast Construction of Plaque-Like Li2TiO3/TiO2 Heterostructure for Efficient Gas-Solid Phase CO2 Photoreduction

Wei Bi,Yanjie Hu,Nan Jiang,Ling Zhang,Hao Jiang,Xing Zhao,Chengyun Wang,Chunzhong Li

DOI: https://doi.org/10.1016/j.apcatb.2020.118810

2020-01-01

Abstract:Exploring a facile and universal strategy to fabricate an efficient heterostructure is a big challenge for achieving highly active and selective CO2 photoreduction. Herein, a plaque-like Li2TiO3/TiO2 heterostructure was in-situ constructed by the gradual intercalation of Li ions into the lattice of TiO2 from the outside and eventually formed the Li2TiO3 phase on the surface of TiO2 in an ultra-high temperature about 2000 K within several milliseconds. This novel structure has a significant improvement in the adsorption capacity of CO2 and reduction of the oxygen defect trap by introduction of Li species. Furthermore, owing to the built-in electric field directed from Li2TiO3 to TiO2, electrons are forced to move to the oxygen atom sites in Li2TiO3, which helps the plaque-like Li2TiO3/TiO2 heterostructure photocatalyst achieve nearly 3 times performance improvement with about 100 % selectivity towards CO. Theoretically and experimentally, we proposed a possible catalytic behavior and mechanism that Li2TiO3/TiO2 heterostructure will choose a shorter pathway through intermediate formate conversion to CO, as the free energy reduce by 26.53 % from 0.98 eV to 0.72 eV. This work gives a new insight for constructing heterostructure in an ultra-fast reaction process, and provides a rational reference for developing highly efficient photocatalysts towards CO2 reduction.
Ascorbic-acid-assisted In-Situ Construction of S-scheme CuO/Cu2O Hetero-Nanosheets with Active Cu(II)-O-Cu(I) Bridges for Efficient CO2 Photoreduction

Lei Li,Changfa Guo,Tianqi Li,Chen Yang,Fang Chen,Wentao Wang,Ruiqiang Yan,Jiqiang Ning,Yong Hu

DOI: https://doi.org/10.1016/j.apsusc.2023.159220

IF: 6.7

2023-01-01

Applied Surface Science

Abstract:Efficient charge transfer across interfaces is highly desirable, but remains challenging in engineering semiconductor heterojunctions for photocatalysis. In this work, hybrid hetero-nanosheets (HNSs) of CuO/Cu2O bridged with interfacial Cu(II)-O-Cu(I) have been constructed via an in-situ topotactic transformation strategy, in which CuO nanosheets are partially reduced by ascorbic acid and transformed into Cu2O. The interfacial Cu(II)-O-Cu(I) bridges are found to provide fast transfer channels for photogenerated carriers transporting from CuO to Cu2O in an S-scheme pathway, leading to enhanced separation of photogenerated carriers. Furthermore, the bond bridges can tune the kinetic and thermodynamic processes of the CO2-to-CO conversion at interfacial Cu(I) catalytic sites by altering the rate-determined step and shifting downwards d-band center of the Cu(I) sites. Owing to the interfacial Cu(II)-O-Cu(I) bridges, the optimized CuO/Cu2O HNSs significantly expedite the CO2 photoreduction to CO, delivering a CO2 conversion rate of 22.14 mu mol g(-1) h(-1) with a CO selectivity of 94.4%, outperforming the state-of-the-art copper oxide-based photocatalysts. This work demonstrates an effective in-situ topotactic transformation strategy to create interfacial bond bridges at heterogeneous interfaces for boosted photocatalysis as well as the critical roles of interface catalytic sites for CO2 conversion.
Construction of a flower-like SnS2/SnO2 junction for efficient photocatalytic CO2 reduction

Feifei You,Yunan Zhou,Danyang Li,Hao Zhang,Dawei Gao,Xiaohong Ma,Rui Hao,Juzhe Liu

DOI: https://doi.org/10.1016/j.jcis.2022.09.134

IF: 9.9

2023-01-01

Journal of Colloid and Interface Science

Abstract:Photoreduction of CO2 to value-added chemicals and fuels is an attractive solution to alleviate environmental problems and energy crisis at the same time. However, engineering efficient photocatalysts with high activity and product selectivity is still challenging. Herein, we achieved three-dimensional (3D) spatial configuration design at micro-scale and heterogeneous interface construction at nano-scale on a SnS2/SnO2 composite, which featured hierarchical flower-like morphology consisted of nanosheets and type-II semiconductor structure. It behaved excellent selectivity and impressive photocatalytic CO2-to-CO performance with a yielding rate of 60.85 μmol g-1h−1, roughly 3 times higher than that of SnS2 and was in the front rank of this kind catalysts under 300 W Xe lamp illumination without using any sensitizers or noble metals. The enhanced catalytic capability could be attributed to the elaborately built structure with suitable energetic position that afforded effective separation and migration of photo-generated electron/hole pairs as well as enhanced light caption and absorption. Meanwhile, main reactive intermediates (e.g., CO2– and *COOH) were captured by in-situ Fourier transform infrared spectroscopy (FTIR), suggesting a fluent catalytic pathway on the SnS2/SnO2 platform. This work provides a new scheme to build advanced catalysts based on multiscale design and rational phase assembling.

chemistry, physical
Unique S-scheme heterojunctions in self-assembled TiO2/CsPbBr3 hybrids for CO2 photoreduction

Feiyan Xu,Kai Meng,Bei Cheng,Shengyao Wang,Jingsan Xu,Jiaguo Yu

DOI: https://doi.org/10.1038/s41467-020-18350-7

IF: 16.6

2020-09-14

Nature Communications

Abstract:Abstract Exploring photocatalysts to promote CO 2 photoreduction into solar fuels is of great significance. We develop TiO 2 /perovskite (CsPbBr 3 ) S-scheme heterojunctions synthesized by a facile electrostatic-driven self-assembling approach. Density functional theory calculation combined with experimental studies proves the electron transfer from CsPbBr 3 quantum dots (QDs) to TiO 2 , resulting in the construction of internal electric field (IEF) directing from CsPbBr 3 to TiO 2 upon hybridization. The IEF drives the photoexcited electrons in TiO 2 to CsPbBr 3 upon light irradiation as revealed by in-situ X-ray photoelectron spectroscopy analysis, suggesting the formation of an S-scheme heterojunction in the TiO 2 /CsPbBr 3 nanohybrids which greatly promotes the separation of electron-hole pairs to foster efficient CO 2 photoreduction. The hybrid nanofibers unveil a higher CO 2 -reduction rate (9.02 μmol g –1 h –1 ) comparing with pristine TiO 2 nanofibers (4.68 μmol g –1 h –1 ). Isotope ( 13 CO 2 ) tracer results confirm that the reduction products originate from CO 2 source.

multidisciplinary sciences
Construction of TiO2/CuPc Heterojunctions for the Efficient Photocatalytic Reduction of CO2 with Water

Jun Wang,Shuang Fu,Peng Hou,Jun Liu,Chao Li,Hongguang Zhang,Guowei Wang

DOI: https://doi.org/10.3390/molecules29081899

IF: 4.6

2024-01-01

Molecules

Abstract:Utilizing solar energy for photocatalytic CO2 reduction is an attractive research field because of its convenience, safety, and practicality. The selection of an appropriate photocatalyst is the key to achieve efficient CO2 reduction. Herein, we report the synthesis of TiO2/CuPc heterojunctions by compositing CuPc with TiO2 microspheres via a hydroxyl-induced self-assembly process. The experimental investigations demonstrated that the optimal TiO2/0.5CuPc photocatalyst exhibited a significantly enhanced CO2 photoreduction rate up to 32.4 mu molg(-1)h(-1) under 300 W xenon lamp irradiation, which was 3.7 times that of the TiO2 microspheres alone. The results of photoelectrochemical experiments indicated that the construction of the heterojunctions by introducing CuPc effectively promoted the separation and transport of photogenerated carriers, thus enhancing the catalytic effect of the photocatalyst.
Construction of TiO2/CuPc Heterojunctions for the Efficient Photocatalytic Reduction of CO2 with Water.

Jun Wang,Shuang Fu,Peng Hou,Jun Liu,Chao Li,Hongguang Zhang,Guowei Wang

DOI: https://doi.org/10.3390/molecules29081899

IF: 4.6

2024-01-01

Molecules

Abstract:Utilizing solar energy for photocatalytic CO2 reduction is an attractive research field because of its convenience, safety, and practicality. The selection of an appropriate photocatalyst is the key to achieve efficient CO2 reduction. Herein, we report the synthesis of TiO2/CuPc heterojunctions by compositing CuPc with TiO2 microspheres via a hydroxyl-induced self-assembly process. The experimental investigations demonstrated that the optimal TiO2/0.5CuPc photocatalyst exhibited a significantly enhanced CO2 photoreduction rate up to 32.4 μmol·g-1·h-1 under 300 W xenon lamp irradiation, which was 3.7 times that of the TiO2 microspheres alone. The results of photoelectrochemical experiments indicated that the construction of the heterojunctions by introducing CuPc effectively promoted the separation and transport of photogenerated carriers, thus enhancing the catalytic effect of the photocatalyst.
CdS Nanoparticles Sensitized High Energy Facets Exposed SnO2 Elongated Octahedral Nanoparticles Film for Photocatalytic Application

Xiaoming Zhou,Yannan Mu,Songbo Zhang,Lili Gao,Hong Chen,Jiajia Mu,Xin Zhang,Miao Zhang,Wenyan Liu

DOI: https://doi.org/10.1016/j.materresbull.2018.11.013

IF: 5.6

2019-01-01

Materials Research Bulletin

Abstract:The fabrication of well-defined semiconductor based SnO2 heterostructure is still a great challenge. In this study, SnO2(TiO2) elongated octahedral nanoparticles film was directly produced on FTO substrate by hydrothermal approach and TiCl4 post-treatment. As a light absorber, CdS nanoparticles were assembled onto the TiCl4-treated SnO2 elongated octahedral nanoparticles (SnO2(TiO2)). We investigated the photocatalytic and photo-electrochemical properties of the prepared SnO2(TiO2)/CdS films. The study found that the prepared SnO2(TiO2)/CdS(6) heterostructure showed much higher photocatalytic activities for the degradation of the methyl orange (MO) under visible light irradiation in comparison with individual SnO2(TiO2) film photocatalyst. The significantly enhanced photocatalytic performance of the SnO2(TiO2)/CdS(6) sample is due to the absorption of visible light and the formation of type-II heterostructure, which plays a role in the effective charge separation. Moreover, these SnO2(TiO2)/CdS films photocatalyst are directly produced on FTO substrates, making the photocatalyst collection and recycling easier than the powders photocatalyst.
Constructing C-doped TiO2/-Bi2O3 hybrids Z-scheme heterojunction for enhanced CO2 photoreduction

Chaogang Ban,Yang Wang,Jiangping Ma,Yajie Feng,Junjie Ding,Youyu Duan,Xue Liu,Bin Zhang,Jinjing Tang,Xiaoping Tao,Liyong Gan,Shuangshuang Tan,Xiaoyuan Zhou

DOI: https://doi.org/10.1016/j.seppur.2023.124745

IF: 8.6

2023-01-01

Separation and Purification Technology

Abstract:Rational fabricating advanced photocatalysts to recycle CO2 into solar fuel is one of the most promising approaches to simultaneously address energy shortages and global warming. TiO2 has been widely used in photocatalytic CO2 reduction due to its abundant reserves, non-toxicity and harmlessness etc. However, it remains significantly challenging for practical applications due to the fast electron-hole recombination. Herein, we design a direct TiO2 based Z-Scheme heterojunction by self-assembly of C-doped TiO2 nanoparticles on 3D hierarchical petal of flower-like beta-Bi2O3 (C-TiO2/beta-Bi2O3). In situ electron paramagnetic resonance tests, in situ X-ray photoelectron spectroscopy and theoretical calculations reveal that electrons are transferred from beta-Bi2O3 to C-TiO2 due to the formation of Z-Scheme heterojunction, which greatly accelerates the separation of photogenerated carriers to promote efficient CO2 photoreduction. Ultimately, the optimal heterojunction shows significantly enhanced photocatalytic activity for CO2 reduction to CO (31.07 mu mol g(-1) h(-1)) compared to the pure TiO2 (3.28 mu mol g(-1) h(-1)) without using any photosensitizers and sacrificial agents. This work provides a unique insight to design direct Z-Scheme heterojunctions and delivers a promising photocatalyst for overcoming global warming and energy-supply issues.
Constructing C-doped TiO2/β-Bi2O3 hybrids Z-scheme heterojunction for enhanced CO2 photoreduction

Chaogang Ban,Yang Wang,Jiangping Ma,Yajie Feng,Junjie Ding,Youyu Duan,Xue Liu,Bin Zhang,Jinjing Tang,Xiaoping Tao,Liyong Gan,Shuangshuang Tan,Xiaoyuan Zhou

DOI: https://doi.org/10.1016/j.seppur.2023.124745

IF: 8.6

2023-12-01

Separation and Purification Technology

Abstract:Rational fabricating advanced photocatalysts to recycle CO2 into solar fuel is one of the most promising approaches to simultaneously address energy shortages and global warming. TiO2 has been widely used in photocatalytic CO2 reduction due to its abundant reserves, non-toxicity and harmlessness etc. However, it remains significantly challenging for practical applications due to the fast electron-hole recombination. Herein, we design a direct TiO2 based Z-Scheme heterojunction by self-assembly of C-doped TiO2 nanoparticles on 3D hierarchical petal of flower-like β-Bi2O3 (C-TiO2/β-Bi2O3). In situ electron paramagnetic resonance tests, in situ X-ray photoelectron spectroscopy and theoretical calculations reveal that electrons are transferred from β-Bi2O3 to C-TiO2 due to the formation of Z-Scheme heterojunction, which greatly accelerates the separation of photogenerated carriers to promote efficient CO2 photoreduction. Ultimately, the optimal heterojunction shows significantly enhanced photocatalytic activity for CO2 reduction to CO (31.07 μmol g–1 h−1) compared to the pure TiO2 (3.28 μmol g–1 h−1) without using any photosensitizers and sacrificial agents. This work provides a unique insight to design direct Z-Scheme heterojunctions and delivers a promising photocatalyst for overcoming global warming and energy-supply issues.

engineering, chemical
Rational Design of Honeycomb-Like APTES-TiO2/COF Heterostructures: Promoted Intramolecular Charge Transfer for Visible-Light-driven Catalytic CO2 Reduction

Lei Wang,Haiyan Cheng,Zhiting Zhang,Yang Zhang,Jingwei Huang,Houde She,Chunli Liu,Qizhao Wang

DOI: https://doi.org/10.1016/j.cej.2022.140990

IF: 15.1

2022-01-01

Chemical Engineering Journal

Abstract:Utilizing organic structures to combine with TiO2 is regarded as a potent strategy for meliorating the photo-catalytic performance of TiO2. Nonetheless, exploration towards the impact of modulation at organic molecular level for the COF construction (e.g., the types, substituent group and the arrangement of the building blocks), upon the optical or/and electronic features of TiO2-COF heterostructures is relatively scarce. Herein, a nitrogen-rich covalent organic framework (COF) which is employed to covalently integrate with amino-propyltriethoxysilane modified TiO2 (APTES-TiO2) through Schiff-base reaction. Due to the significant charge density disparity between the two building units, 2, 4, 6-tris (4-aminophenyl)-1, 3, 5-triazine (TAPT) and melem in the hybridized TiO2@TMP-COF with honeycomb-like morphology, the promoted intramolecular charge transfer (ICT) brings about accelerated charge delivery efficiency within the heterostructure by contrast to the structure-similar COF established hybrid, TiO2@TM-COF, which is built by the identical approach except for the involvement of TAPT monomer. Accordingly, the photocatalytic CO2 reduction reaction (CO2RR) dominated by TiO2@TMP-COF affords the CO production of 6.76 mu mol center dot g(-1)center dot h(-1), about 3 times that of TiO2@TM-COF; still, the enhanced catalytic efficiency than either the constituent TiO2 or TMP-COF owes much to the Z-scheme charge migration dynamics and augmented light-capturing capability within the hybrid. Our study opens a new landscape of heterostructure establishment for simultaneously ameliorating light absorption and accelerating charge delivery in photocatalysis.
Leaf-like MSX/TiN heterojunction photocathodes mimicking plant cell - An effective strategy to enhance photoelectrocatalytic carbon dioxide reduction and systematic mechanism investigation

Yan Wei,Chenpu He,Noushad Ullah,Youzhi Cao,Changwan Zhuang,Bing Wang,Jianhua Wang,Zhengkang Hu,Di Ma,Weichun Ye,Huanwang Jing

DOI: https://doi.org/10.1016/j.jcis.2024.09.105

2025-01-15

Abstract:Semiconductors, such as metal oxides and metal sulfides (MSX), are widely investigated as effectively catalytic materials to convert carbon dioxide (CO2) and water into chemicals under simulated solar light. These valuable investigations might address both the energy crisis and climate change in our modern society. Herein, a novel strategy to construct leaf-like heterojunctions of VS-ZnIn2S4/TiN-x is reported. The new semiconductor heterojunctions were then applied to photoelectrocatalytic CO2 reduction, achieving excellent performance (formate formation rate of 1173.2 μM h-1 cm-2) attributed to the plant cell-like morphology and enhanced electron mobility from the heterojunction interfaces to the active sites on the surface. Our findings suggest that titanium nitride (TiN) with good conductivity can improve the photoelectrocatalytic ability of MSX through heterojunction construction. The photocathode VS-ZnIn2S4/TiN-3 exhibits 81.0 % selectivity toward C2 products by optimizing the material structure and reaction conditions. According to the systematic investigation of operando Fourier transform infrared (FTIR) spectra, common intermediates such as *COO-, *COOH, *CO, *CHO, *COCHO, and *COCH3 reported in the literature were carefully verified. Among these, the carbene specie serve as the key intermediate responsible for generating other intermediates and resulting in all products.
Construction of a ZnIn 2 S 4 /Au/CdS Tandem Heterojunction for Highly Efficient CO 2 Photoreduction

Haopeng Jiang,Mengyang Xu,Xiaoxue Zhao,Huijie Wang,Qi Liu,Zhi Liu,Qinqin Liu,Guoyu Yang,Pengwei Huo

DOI: https://doi.org/10.1021/acs.inorgchem.2c01216

IF: 4.6

2022-07-15

Inorganic Chemistry

Abstract:Photocatalytic CO(2) reduction technology is of great importance to alleviate energy crisis and environmental pollution; however, it remains a serious challenge due to the fast recombination of carriers. In this study, we report a three-dimensional structure of a ZnIn(2)S(4)/Au/CdS composite photocatalyst for the CO(2) reduction reaction, where Au nanoparticles (NPs) are evenly anchored on the surface of ZnIn(2)S(4) by photodeposition and Au NPs are wrapped around by CdS. In ZnIn(2)S(4)/Au/CdS...

chemistry, inorganic & nuclear
Facile fabrication of CdIn2S4/TiO2 heterojunction for enhanced solar light efficient CO2 reduction

Xiaoyu Ma,Longlong Wang,Houde She,Yu Zhou,Lei Wang,Jingwei Huang,Qizhao Wang

DOI: https://doi.org/10.1007/s11705-024-2456-7

IF: 4.803

2024-07-19

Frontiers of Chemical Science and Engineering

Abstract:Photocatalytic CO 2 reduction is a promising solution to simultaneously provide renewable chemical fuels and address the greenhouse effect. However, designing practical photocatalysts with advanced architectures remains challenging. Herein, we report the preparation of a novel CdIn 2 S 4 /TiO 2 binary heterojunction via an in situ solvothermal approach, which exhibits superior photocatalytic activity for sunlight-driven CO 2 reduction. The CdIn 2 S 4 /TiO 2 composites exhibit significantly enhanced photocatalytic performance for CO 2 reduction compared to unmodified TiO 2 . Among them, the 3% CdIn 2 S 4 /TiO 2 composite has optimal CO and CH 4 evolution rates of 18.32 and 1.03 μmol·g −1 ·h −1 , respectively. The yield of CO is 4.7 times higher than that of pristine TiO 2 . This improved photocatalytic activity of the CdIn 2 S 4 /TiO 2 heterostructure can be attributed to its large surface area, extended light absorption range and high separation efficiency of photogenerated electron-hole pairs, which are supported by the results of photoluminescence spectroscopy and the photoelectrochemical measurements. Moreover, the photocatalytic mechanism based on the binary CdIn 2 S 4 /TiO 2 heterojunction is proposed and separation process of photogenerated electron-hole pairs is discussed. In brief, we aim to provide insights into the application of TiO 2 in energy conversion processes through the construction of heterogeneous junctions.

engineering, chemical
A New 0D-2D CsPbBr3-Co3O4 Heterostructure Photocatalyst with Efficient Charge Separation for Photocatalytic CO2 Reduction

Xin Zhong,Xinmeng Liang,Xinyu Lin,Jin Wang,Malik Zeeshan Shahid,Zhengquan Li

DOI: https://doi.org/10.1039/d3qi00527e

IF: 7.779

2023-01-01

Inorganic Chemistry Frontiers

Abstract:The effective spatial separation of photogenerated charge carriers is essential for realizing efficient CO2 conversion. Herein, a new CsPbBr3-Co3O4 heterostructure photocatalyst was rationally developed for photocatalytic CO2 reduction. A facile synthetic strategy based on electrostatic interactions was utilized. The results revealed that the CsPbBr3-Co3O4 hybrid exhibited a boosted evolution rate of 64.6 mu mol g(-1) h(-1) (CO: 35.40 mu mol g(-1) h(-1); CH4: 29.2 mu mol g(-1) h(-1)) with an electron consumption rate (R-electron) of 304.4 mu mol g(-1) h(-1), surpassing pristine CsPbBr3 or Co3O4. The high activity mainly arises from efficient charge separation and the directional transfer of electrons from CsPbBr3 to Co(3)O(4)via an intimately coupled heterointerface. Notably, the surface features (derived from the unique morphology) expedited the CO2 adsorption and accumulation of electrons at the Co3O4 site which ultimately facilitated the conversion of CO2 over the CsPbBr3-Co3O4 composite. This approach provides a strategy to design and modulate highly active metal oxide and perovskite-based photocatalysts and presents great potential for constructing a heterointerface for CO2 reduction.
A colloidal ZnTe quantum dot-based photocathode with a metal–insulator–semiconductor structure towards solar-driven CO 2 reduction to tunable syngas

Peng Wen,Hui Li,Xiao Ma,Renbo Lei,Xinwei Wang,Scott M. Geyer,Yejun Qiu

DOI: https://doi.org/10.1039/d0ta10394b

IF: 11.9

2021-01-01

Journal of Materials Chemistry A

Abstract:A Ag 3 Cu/TiO 2 /ZnTe photocathode which integrates fast interface-carrier migration, catalytic selectivity, and stability was fabricated for solar-driven CO 2 reduction to tunable syngas.

materials science, multidisciplinary,chemistry, physical,energy & fuels
Synchronistic embedding of oxygen vacancy and Ag nanoparticles into potholed TiO 2 nanoparticles-assembly for collaboratively promoting photocatalytic CO 2 reduction

Wei Chen,Jinyan Xiong,Zhipan Wen,Rong Chen,Gang Cheng

DOI: https://doi.org/10.1016/j.mcat.2023.113138

IF: 4.6

2023-04-16

Molecular Catalysis

Abstract:Photocatalytic CO 2 reduction offers a potential to produce clean and renewable fuels as well as reduce massive emissions of CO 2 by utilizing solar energy. The inhibited charge recombination and fertile surface reactive sites play vital roles in determining the photocatalytic performance and products selectivity in CO 2 reduction reaction. Herein, the Ag/TiO 2-x hybrid by synchronistic introduction of oxygen vacancy and Ag nanoparticles into SiO 2 spheres-templated potholed TiO 2 assembly with nanoparticles is constructed for photocatalytic CO 2 conversion. The Schottky junction between oxygen vacancy TiO 2-x and Ag particles provides synergistic enhancement of solar light utilization, photo-induced charge separation and migration process, which is of significance in the promoted CO 2 photo-conversion. Indeed, the CH 4 yield of oxygen vacancy TiO 2-x (1.56 μmol/g/h) is more than 3 times as high as the TiO 2 (0.47 μmol/g/h), while the as-synthesized Ag/TiO 2-x hybrids show an enhancement of photocatalytic CO 2 reduction into CH 4 and CO. Among them, the Ag/TiO 2-x -10% hybrid has the best photocatalytic performance, and it shows significantly superior CH 4 (8.61 μmol/g/h) and CO (2.27 μmol/g/h) yields to that of pure TiO 2-x and TiO 2 .

chemistry, physical
Fe-TiO2-x/TiO2 S-scheme homojunction for efficient photocatalytic CO2 reduction

Ya-Nan Jing,Xing-Liang Yin,Lei-Lei Li,Yan-Lan Wang,Jia Xue,Ze-Feng Xu,Da-Qiang Liu,Chuan-Wu Chen,Xiao-Jie Liu,Er-Kang Liu

DOI: https://doi.org/10.1016/j.jcis.2024.04.158

2024-08-15

Abstract:CO2-to-high value-added chemicals via a photocatalytic route is of interest but strangled by the low efficiency. Herein, a novel Fe-TiO2-x/TiO2 S-scheme homojunction was designed and constructed by using a facile surface modification approach whereby oxygen vacancy (OV) and Fe introducing on the TiO2 nanorod surface. The as-synthesized Fe-TiO2-x/TiO2 S-scheme homojunction exhibits positive properties on promoting photocatalytic CO2 reduction: i) the nanorod structure provides numerous active sites and a radical charge transfer path; ii) the doped Fe and OV not only synergistically enhance light utilization but also promote CO2 adsorption; iii) the Fe-TiO2-x/TiO2 S-scheme homojunction benefits photoexcited charge separation and retains stronger redox capacity. Thanks to those good characters, the Fe-TiO2-x/TiO2 homojunction exhibits superior CO2 reduction performances with optimized CO/CH4 generation rates of 122/22 μmol g-1h-1 which exceed those of pure TiO2 by more than 9.4/7.3 folds and most currently reported catalytic systems. This manuscript develops a facile and universal approach to synthesize well-defined homojunction and may inspire the construction of other more high-efficiency photocatalysts toward CO2 reduction and beyond.
Synchronous construction of Cu and Ni single-atom sites in ordered porous TiO2 for enhanced photo-conversion of CO2 and H2O to methane

Mao Xu,Cong Chen,Xiaobo Han,Weisheng Hu,Benxia Li

DOI: https://doi.org/10.1016/j.colsurfa.2024.133676

2024-05-01

Abstract:The solar-powered conversion of CO2 and H2O to hydrocarbons is highly compelling but remains a significant challenge because both CO2 reduction and H2O oxidation are thermodynamically unfavorable. Herein, the synchronous incorporation of Cu and Ni single-atom sites into ordered porous TiO2 was accomplished through a template-assisted calcination process, resulting in a series of Cu-Ni/TiO2 catalysts for photocatalytic CO2 reduction using H2O as a hydrogen source. The formation of Cu and Ni single atoms was verified by X-ray absorption fine structure (XAFS) spectroscopy. The optimal Cu-Ni/TiO2 photocatalyst exhibited excellent performance to reach a CH4 production rate of 63.88 μmol g−1 h−1 with a high selectivity of 96.4% under simulated sunlight, in the absence of sacrificial agents. The presence of Cu and Ni single atoms not only provided effective active sites for adsorption and activation of CO2 and H2O but also facilitated separation and transfer of photogenerated charge carriers. In situ spectroscopic analyses revealed that CO2 was adsorbed on the catalyst as bicarbonates, followed by the multistep reduction into CH4 via the electron-proton transfer processes, while the photogenerated holes were consumed by H2O oxidation to generate H2O2. The simultaneous enhancement of both H2O and CO2 activation guarantees excellent photocatalytic performance towards CH4 production. This study provides guidance on developing highly efficient photocatalysts by engineering active sites as well as insights into enhancing CO2 photoreduction.

chemistry, physical
Engineering of SnO2/TiO2 heterojunction compact interface with efficient charge transfer pathway for photocatalytic hydrogen evolution

Hongli Wang,Jianan Liu,Xudong Xiao,Huiyuan Meng,Jie Wu,Chuanyu Guo,Mang Zheng,Xiaolei Wang,Shien Guo,Baojiang Jiang

DOI: https://doi.org/10.1016/j.cclet.2022.01.018

IF: 9.1

2022-01-01

Chinese Chemical Letters

Abstract:Fabricating an efficient charge transfer pathway at the compact interface between two kinds of semiconductors is an important strategy for designing hydrogen production heterojunction photocatalysts. In this work, we prepared a compact, stable and oxygen vacancy-rich photocatalyst (SnO2/TiO2 heterostructure) via a simple and reasonable in-situ synthesis method. Briefly, SnCl2–2H2O is hydrolyzed on the TiO2 precursor. After the pyrolysis process, SnO2 nanoparticles (5 nm) were dispersed on the surface of ultrathin TiO2 nanosheets uniformly. Herein, the heterojunction system can offer abundant oxygen vacancies, which can act as active sites for catalytic reactions. Meanwhile, the interfacial contact of SnO2/TiO2 grading semiconductor oxide is uniform and tight, which can promote the separation and migration of photogenerated carriers. As shown in the experimental results, the hydrogen production rate of SnO2/TiO2 is 16.7 mmol h−1 g−1 (4.4 times higher than that of TiO2), which is owing to its good dynamical properties. This work demonstrates an efficient strategy of tight combining SnO2/TiO2 with abundant oxygen vacancies to improve catalytic efficiency.

chemistry, multidisciplinary

Construction of Heterostructured Sn/TiO 2 /Si Photocathode for Efficient Photoelectrochemical CO 2 Reduction

Construction of CuInS2/C/TiO2 hierarchical tandem heterostructures with optimized CO2 photoreduction under visible light

Ultra-fast Construction of Plaque-Like Li2TiO3/TiO2 Heterostructure for Efficient Gas-Solid Phase CO2 Photoreduction

Ascorbic-acid-assisted In-Situ Construction of S-scheme CuO/Cu2O Hetero-Nanosheets with Active Cu(II)-O-Cu(I) Bridges for Efficient CO2 Photoreduction

Construction of a flower-like SnS2/SnO2 junction for efficient photocatalytic CO2 reduction

Unique S-scheme heterojunctions in self-assembled TiO2/CsPbBr3 hybrids for CO2 photoreduction

Construction of TiO2/CuPc Heterojunctions for the Efficient Photocatalytic Reduction of CO2 with Water

Construction of TiO2/CuPc Heterojunctions for the Efficient Photocatalytic Reduction of CO2 with Water.

CdS Nanoparticles Sensitized High Energy Facets Exposed SnO2 Elongated Octahedral Nanoparticles Film for Photocatalytic Application

Constructing C-doped TiO<sub>2</sub>/-Bi<sub>2</sub>O<sub>3</sub> hybrids Z-scheme heterojunction for enhanced CO<sub>2</sub> photoreduction

Constructing C-doped TiO2/β-Bi2O3 hybrids Z-scheme heterojunction for enhanced CO2 photoreduction

Rational Design of Honeycomb-Like APTES-TiO2/COF Heterostructures: Promoted Intramolecular Charge Transfer for Visible-Light-driven Catalytic CO2 Reduction

Leaf-like MSX/TiN heterojunction photocathodes mimicking plant cell - An effective strategy to enhance photoelectrocatalytic carbon dioxide reduction and systematic mechanism investigation

Construction of a ZnIn 2 S 4 /Au/CdS Tandem Heterojunction for Highly Efficient CO 2 Photoreduction

Facile fabrication of CdIn2S4/TiO2 heterojunction for enhanced solar light efficient CO2 reduction

A New 0D-2D CsPbBr3-Co3O4 Heterostructure Photocatalyst with Efficient Charge Separation for Photocatalytic CO2 Reduction

A colloidal ZnTe quantum dot-based photocathode with a metal–insulator–semiconductor structure towards solar-driven CO 2 reduction to tunable syngas

Synchronistic embedding of oxygen vacancy and Ag nanoparticles into potholed TiO 2 nanoparticles-assembly for collaboratively promoting photocatalytic CO 2 reduction

Fe-TiO2-x/TiO2 S-scheme homojunction for efficient photocatalytic CO2 reduction

Synchronous construction of Cu and Ni single-atom sites in ordered porous TiO2 for enhanced photo-conversion of CO2 and H2O to methane

Engineering of SnO2/TiO2 heterojunction compact interface with efficient charge transfer pathway for photocatalytic hydrogen evolution