Abstract:Chemical looping gasification (CLG) is considered as a novel gasification technology because gas-phase oxygen of the gasifying medium can be replaced by lattice oxygen of the oxygen carrier. The gasifying mediums (e.g., pure O-2 and steam) used as the oxygen source can apparently improve the char conversion in traditionally biomass gasification. Similarly, the objective of this study is to investigate char CLG with the oxygen carrier as an individual oxygen source. A NiO-modified iron ore oxygen carrier was prepared by the impregnation method coupled with ultrasonic treatment. The characteristics of the oxygen carrier were analyzed by an X-ray diffractometer (XRD) and H-2 temperature-programmed reduction (H-2-TPR). The formation of spinel-type nickel iron oxide NiFe2O4 can evidently enhance the reactivity of the oxygen carrier. The reduction of the oxygen carrier by biomass char was investigated using thermogravimetric analysis (TGA) together with a fixed-bed reactor under an inert atmosphere. TGA tests show that the reactivity of the oxygen carrier increased with the increase of NiO loading. An optimal mass ratio of char/oxygen carrier is determined at 4:6 With the aim of obtaining a maximum reaction rate. The presence of spinel-type nickel iron oxide NiFe2O4 apparently improved the reaction rate of char gasification. The fixed-bed gasification results show that CO was generated faster than other components because carbon was partially oxidized and H-2 was quickly consumed by the lattice oxygen [O] of the oxygen carrier. A relatively high carbon conversion of 55.56% was obtained in the char CLG, in comparison to that of char pyrolysis (5.52%). The lattice oxygen [O] of the oxygen carrier was fully consumed by biomass char. Moreover, biomass char was catalytically, pyrolyzed becausee the deep reduction products (metallic iron and nickel) can act as catalysts for char pyrolysis. XRD analysis shows that the oxygen carrier was deeply reduced into Fe (Ni) alloy and Fe3C species during the reduction stage of Char CLG. However, the. regenerated oxygen carrier after oxidation can be recycled for char CLG on the basis of XRD and scanning electron microscopy (SEM) analyses.

Chemical looping gasification using Nickel-containing electroplating sludge and dyeing sludge as oxygen carrier

Chemical Looping Gasification of Sewage Sludge Using Copper Slag Modified by NiO As an Oxygen Carrier

Chemical Looping Gasification of Biomass Char Using Iron Ore As an Oxygen Carrier

Reaction performance and mechanism of a NiO/Ca2Fe2O5 oxygen carrier in Chemical looping gasification of cellulose

Chemical looping gasification of high nitrogen wood waste using a copper slag oxygen carrier modified by alkali and alkaline earth metals

Experimental Investigation of Fe–Ni–Al Oxygen Carrier Derived from Hydrotalcite-like Precursors for the Chemical Looping Gasification of Biomass Char

High-Quality Syngas Production by Chemical Looping Gasification of Bituminite Based on NiFe2O4 Oxygen Carrier

Co-production of syngas and H2 from chemical looping steam reforming of methane over anti-coking CeO2/La0.9Sr0.1Fe1−xNixO3 composite oxides

Preparation of composite nickel–iron oxide as highly reactive oxygen carrier for chemical-looping combustion process

Uniformly dispersed NiFeAlO 4 as oxygen carrier for chemical looping steam methane reforming to produce syngas

Syngas production via chemical looping reforming biomass pyrolysis oil using NiO/dolomite as oxygen carrier, catalyst or sorbent

Catalytic reduction of nitrogen monoxide using iron–nickel oxygen carriers derived from electroplating sludge: Novel method for the collaborative emission decrease of polluting gases

Comparative Study of MxOy (M = Cu, Fe and Ni) Supported on Dolomite for Syngas Production Via Chemical Looping Reforming with Toluene

High-reactive and Coke-Resistant Polyhedral NiO/Fe2O3 Oxygen Carrier for Enhancing Chemical Looping CH4–CO2 Dry Reforming

Screening of NiFe2O4 Nanoparticles as Oxygen Carrier in Chemical Looping Hydrogen Production

Chemical looping gasification of <i>Chlorella</i>: Parametric optimization, reaction mechanisms, and nitrogen-containing pollutants emission

Emissions of Nitrogenous Pollutants in Chemical Looping Gasification of High Nitrogen Wood Waste Using a K-modified Copper Slag Oxygen Carrier

Hydrogen-rich syngas production from straw char by chemical looping gasification: The synergistic effect of Mn and Fe on Ni-based spinel structure as oxygen carrier

Enhanced stability of iron-nickel oxygen carriers in biomass chemical looping gasification by core-shell structure

Effect of ash on the performance of iron-based oxygen carrier in the chemical looping gasification of municipal sludge

Evaluation of Fe-Ni Composite Oxygen Carrier in Coal Chemical Looping Gasification