Abstract:Precise tailoring of nanostructured cobalt ferrite paves the way to design and develop devices for stress and noncontact torque sensors. Herein, Mn2+ ions are inserted into cobalt ferrite with different ratios using a facile sol–gel method. The as-synthesized ferrites are characterized via energy dispersive X-ray (EDX), Fourier transforms infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscope (SEM), high resolution transmission electron microscope (HR-TEM), thermogravimetric analysis (TGA), electrochemical impedance spectroscopy (EIS), and vibrating sample magnetometer (VSM). EDX analyses affirm the stoichiometry of the synthesized samples with the intended ratios. The FTIR and XRD prove the presence of a single-phase cubic spinel structure for all as-synthesized samples. The dislocation, the inter-chain distance and the distortion parameter values decrease with increasing Mn2+ content, which outweigh the improvement of the crystal structure of the doped CFO samples. SEM micrographs illustrate that the incorporation of Mn2+ significantly soars the porosity of the samples. TEM images reveal that the samples comprise particles in the nanometer range with spherical shape and porous nature. Thermal analyses show that the weight loss is dependent on Mn2+ content in the sample. For instance, at x = 0, a slight variation in the weight loss estimated by 8% is observed while at x = 0.25 the weight loss has reached up to 40%. The dielectric losses (8 × 105) of Co0.5Mn0.5 Fe2O4 is enough to meet the demands of microwave applications. Finally, a reduction in the magnetization of the pure CFO from 68.419 emu g−1 to 50.307 emu g−1 is achieved at x = 0.25.Herein, manganese substituted cobalt ferrites were synthesized using a facile sol–gel method. The Rietveld refinements of Co1-xMnxFe2O4 have studied. SEM images have indicated that the surface of the as-synthesized NPs has some porous shapes. EDX analyses have affirmed the stoichiometry of the samples. The TEM image reveals that particles are in the nanometer range. Thermal analyses show that the weight loss is dependent on Mn2+ content in the sample. The dielectric losses (8 × 105) of Co0.5Mn0.5 Fe2O4 is enough to meet the demands of microwave applications. The hysteresis loops reveal that the magnetic behavior of the CFO NPs is significantly influenced by Mn2+ ions substitution.

The effect of adding cobalt ferrite (CoFe3O4) nanoparticles as fillers on rheological and structural behaviour of gum ghatti-cl-poly(NIPAm) hydrogels

Synthesis, rheological and thermal studies of Gum ghatti-cl-poly(acrylic acid) hydrogels containing CoFe2O4 nanoparticles

Effect of Functionalized Multiwalled Carbon Nanotubes on Mechanical, Swelling and Viscoelastic Properties on Gum ghatti-cl-poly(NIPAm) Hydrogels

Synthesis and characterization of magnetic poly(acrylic acid) hydrogel fabricated with cobalt nanoparticles for adsorption and catalytic applications

Effect of Nano Spinel Ferrites Co0.9Cu0.1Fe2O4 on Non-Isothermal Cold Crystallization Behaviours and Kinetics of Its Composites with Polylactic Acid

Effect of Gd and Co Contents on the Microstructural, Magneto-Optical and Electrical Characteristics of Cobalt Ferrite (cofe2o4) Nanoparticles

Fabrication, mechanical, and electromagnetic studies of cobalt ferrite based‐epoxy nanocomposites

Poly (acrylic acid-co-2-hydroxyethyl methacrylate)-grafted gum ghatti hydrogel for capturing heavy metal ions

Effect of small amounts of akaganeite (β-FeOOH) nanorods on the gelation, phase behaviour and injectability of thermoresponsive Pluronic F127

Poly(acrylic acid-co-acrylamide)/Polyacrylamide pIPNs/Magnetite Composite Hydrogels: Synthesis and Characterization

Structural, Optical, and Morphological Study of Manganese Substituted Cobalt Ferrite and Its Effect on the Magnetic and Dielectric Properties of PVA Composites

Magnetic Hydrogels with Supracolloidal Structures Prepared by Suspension Polymerization Stabilized by Fe(2)O(3) Nanoparticles.

"Sol-gel auto combustion synthesis of Al3+-Gd3+ ions co-doped cobalt ferrite nanoparticles for nanoelectronics applications"

Exploration of the electrical conductivity of oxidized multiwalled carbon nanotubes within the matrix of gum ghatti-cl-poly(acrylic acid) hydrogel

Preparation, structural, magnetic, and AC electrical properties of synthesized CoFe2O4 nanoparticles and its PVDF composites

Nanoporous Sodium Carboxymethyl Cellulose-g-poly (Sodium Acrylate)/FeCl3 Hydrogel Beads: Synthesis and Characterization

Physically-crosslinked polyvinyl alcohol composite hydrogels containing clays, carbonaceous materials and magnetic nanoparticles as fillers

Enhancement of Structural, Optical, and Electrical Properties of Hydroxypropyl Methylcellulose/Polyvinyl Alcohol Nanocomposites by Nickel Ferrite Nanoparticles for Optoelectronic Applications

Synthesis Factors Dependence of Magnetic Properties of CoFe2O4 and CoFe2-xGdxO4 Semicrystalline Nanoparticles with desired Morphology through Hydrothermal Procedure

The effect of iron oxide content on the structural and optical parameters of polyvinyl alcohol/graphene nanocomposite films

Incorporation of Mn2+ into cobalt ferrite via sol–gel method: insights on induced changes in the structural, thermal, dielectric, and magnetic properties