Abstract:The deep drawing process is considered environmentally friendly as it generates minimal waste. This paper introduces the multi-draw deep drawing method and identifies the optimal number and parameters for scaled cup quality. This approach extends from macro to micro-parts, making it suitable for miniaturized devices in high-quality electronic applications. It involves unidirectional rolling (UDR) and bidirectional rolling, reducing the ultimate thickness to 50% of the original. Six-millimeter-thick copper sheets undergo five scaling factor, culminating in the ninth incremental rolling step to create the final scaled sheet. Formability characteristics of the rolled sheet are measured using the L 9 orthogonal Array. In the Altair Inspire Form, three random trials are performed to mimic deep-drawn cups. An integrated model involving AHP (Weights Determination), FEA (Trails Runs), ANN (Back Propagation Neural Network Predicted response), and TARAS (Ranking) is employed to forecast the MCDM response and validate parameters. This integrated model allows for the development of assessment and performance. It can predict and optimize process parameters for multi-draw deep drawing, covering macro to micro-sized cups. The study assesses various quality attributes, including maximum thinning rate, formability, minimum forming force in KN, and Springback in mm. The integrated approach provides optimal parameter values for scaled cup-drawn pieces, and FEA–ANN–AHP–TARAS helps identify the best values. These integrated tools and models yield robust results. For UDR rolling, trail run is the optimally balanced process parameter, with Trail 9 at 93.82% being the best and Trail 1 at 61.6% being the worst. The proposed sensitivity analysis is validated.

Design, construction, and demonstration of a novel die system for deep drawing applications with utilization of ultrasonic vibrations

Development of Drawing Die for Heat-Shield Panel of Automobile Engine Based on Finite Element

Radial Lorentz Force Augmented Deep Drawing for Large Drawing Ratio Using a Novel Dual-Coil Electromagnetic Forming System

Optimum Design of Progressive Die Drawing Sequence Based on Finite Element Analysis

Microstructural analysis of sheet hydroforming process assisted by radial ultrasonic punch vibration in a hydro-mechanical deep drawing die

Electromagnetic pulse-assisted incremental drawing of aluminum cylindrical cup

Finite Element Simulation of a Multistage Square Cup Drawing Process for Relatively Thin Sheet Metal through a Conical Die

Application of multi draw radius deep draw die for increase in formability of redrawn cylindrical cups

Design of Ultrasonic Machining Device for Thin-Wall Cylinder of Air Compressor

Analysis of Forming of Automotive Drawbar and Design of the Die

Numerical multi-objective optimization of segmented and variable blank holder force trajectories in deep drawing based on DNN-GA-MCS strategy

Research on 5A06 Aluminium Alloy Thin-wall Semisphere Hydromechanical Deep Drawing Process

Feasibility of Electromagnetic Pulse-Assisted Incremental Drawing with a Radial Magnetic Force for AA-5052 Aluminum Alloy Sheet

Development of forming process for deep drawing of square cup with optimized blank holder pressure

Effect of process parameters on the deep drawing formability of aluminum and advanced high-strength steel square cups

Detailed experimental and numerical analysis of a cylindrical cup deep drawing: pros and cons of using solid-shell elements

Hybrid models for optimization of deep-drawn cups deploying scaling laws: a case study for sustainable development

Incremental electromagnetic-assisted stamping (IEMAS) with radial magnetic pressure: A novel deep drawing method for forming aluminum alloy sheets

A New Equation of Load Curve of Critical Wrinkles Variable Blank Holder Force in the Warm Deep-Drawing of Twin-Roll Cast Mg Sheets

Deep Drawability of Al-Mg Alloys Produced by Twin Roll Continuous Casting Method: Investigation of Microstructure and Mechanical Properties

Mechanism of pre-deformation effect on sheet deep-drawing forming under magnetic field condition using a magnetorheological fluid (MRF) medium