Abstract:Living beings modulate the impedance of their joints to interact proficiently, robustly, and safely with the environment. These observations inspired the design of soft articulated robots with the development of Variable Impedance and Variable Stiffness Actuators. However, designing them remains a challenging task due to their mechanical complexity, encumbrance, and weight, but also due to the different specifications that the wide range of applications requires. For instance, as prostheses or parts of humanoid systems, there is currently a need for multi-degree-of-freedom joints that have abilities similar to those of human articulations. Toward this goal, we propose a new compact and configurable design for a two-degree-of-freedom variable stiffness joint that can match the passive behavior of a human wrist and ankle. Using only three motors, this joint can control its equilibrium orientation around two perpendicular axes and its overall stiffness as a one-dimensional parameter, like the co-contraction of human muscles. The kinematic architecture builds upon a state-of-the-art rigid parallel mechanism with the addition of nonlinear elastic elements to allow the control of the stiffness. The mechanical parameters of the proposed system can be optimized to match desired passive compliant behaviors and to fit various applications (e.g., prosthetic wrists or ankles, artificial wrists, etc.). After describing the joint structure, we detail the kinetostatic analysis to derive the compliant behavior as a function of the design parameters and to prove the variable stiffness ability of the system. Besides, we provide sets of design parameters to match the passive compliance of either a human wrist or ankle. Moreover, to show the versatility of the proposed joint architecture and as guidelines for the future designer, we describe the influence of the main design parameters on the system stiffness characteristic and show the potential of the design for more complex applications.

A Compliant Rolling Contact Joint and Its Application in a 3-DOF Planar Parallel Mechanism With Kinematic Analysis

Kinematic and dynamic analysis of a 3-DOF parallel mechanism

Design and Kinematic Analysis of a Flexible-Link Parallel Mechanism With a Spatially Quasi-Translational End Effector

A Tensegrity-Inspired Compliant 3-DOF Compliant Joint

A New Butterfly-Inspired Compliant Joint with 3-DOF In-plane Motion

Modeling and Analysis of a Novel 3R Parallel Compliant Mechanism

A Novel Flexure-Based 3-DOF Micro-Parallel Manipulator with a Gripper for Micro/nano Manipulation

Design and optimization of a planar anti-buckling compliant rotational joint with a remote center of motion

A New Planar Two Degrees of Freedom Parallel Mechanism

Design and DOF Analysis of a Novel Compliant Parallel Mechanism for Large Load

Kinematic Performance and Accuracy Analysis of New Type 3-DOF Parallel Mechanism

Development of A Passive Compliant Mechanism for Measurement of Micro/Nanoscale Planar 3-Dof Motions

A novel compliance modeling method for compliant parallel mechanisms and its application

Systematic Design Method And Experimental Validation Of A 2-Dof Compliant Parallel Mechanism With Excellent Input And Output Decoupling Performances

A Configurable Architecture for Two Degree-of-Freedom Variable Stiffness Actuators to Match the Compliant Behavior of Human Joints

Compliance Analysis of a Novel Tool Head with Parallel Kinematics Considering Joint Clearance

Compliance modeling of planar flexure-based mechanisms and its application to micro-motion stages

Analysis and Application of a 2-DOF Planar Parallel Mechanism

Enumeration and optimum design of a class of translational parallel mechanisms with prismatic and parallelogram joints

Incorporating General Contact Surfaces in the Kinematics of Tendon-Driven Rolling-Contact Joint Mechanisms

Mobility Characteristics of a Flexure-based Compliant Manipulator with Three Legs