Abstract:Electroless nickel-phosphorus (Ni-P) plating used in a range of hot embossing metal molds/dies and injection metal molds/dies must be manufactured to nano-precision roughness for proper operation of the molds/dies. We therefore developed a novel polishing technique for mirror surface finishing of this kind of magnetic material using a magnetic compound fluid (MCF) slurry. The effects of the magnetic and gravitational forces acting on the carbonyl iron particles (CIPs) and abrasive particles (APs) within the MCF slurry were studied first, and the behaviors of the CIPs and APs in the presence of an external magnetic field were predicted. Then, experiments were performed to confirm the predictions by investigating the distribution of the CIPs and APs on the working surface of the MCF slurry. Finally, four MCF slurries containing CIPs and APs with different diameters were employed to finish the Ni-P-plated STAVAX steel specimen at different working gaps. The results revealed that for the magnetic workpiece, the resultant vertical force attracted CIPs towards the work surface, whereas APs were pushed away from the work surface. However, the CIPs and APs showed opposite behaviors with the non-magnetic workpiece. The percentage of APs distributed on the working surface increased and the distribution became more even as either the diameter of the CIPs or the working gap increased, whereas that of CIPs had the opposite tendency. The MCF slurry containing bigger CIPs and smaller APs should be employed and the working gap should be set at a smaller value in order to perform mirror surface finishing of a magnetic Ni-P-plated surface. Under the experimental conditions in this work, the Ni-P-plated surface quality improved significantly, and a mirror surface roughness (Ra) of 4 nm was successfully achieved without leaving scratches or particle adhesion when using an MCF slurry containing CIPs 7 mu m in diameter and APs 1 mu m in diameter, showing that MCF slurries containing commercial CIPs are applicable to the nano-precision finishing of magnetic materials. (C) 2016 Elsevier Inc. All rights reserved.

Dispersion stabilization of carbonyl iron particles and its applications in chemical mechanical planarization

Effect of the surface coating of carbonyl iron particles on the dispersion stability of magnetorheological fluid

Ultrafine Polishing of Optical Polymer with Zirconia-Coated Carbonyl-Iron-particle-based Magnetic Compound Fluid Slurry

Methods and Mechanistic Analysis of Improving the Dispersion of Nano Silica Colloidal Particles in Chemical Mechanical Polishing Slurries

Characterization of Ceria Nanoparticles as Abrasives Applied with Defoaming Polymers for CMP (Chemical Mechanical Polishing) Applications

Improvement in dispersion stability of alumina suspensions and corresponding chemical mechanical polishing performance

Optimizing of the Colloidal Dispersity of Silica Nanoparticle Slurries for Chemical Mechanical Polishing

Chemical Mechanical Planarization (cmp) of On-Axis Si-Face Sic Wafer Using Catalyst Nanoparticles in Slurry

A New Magnetic Compound Fluid Slurry And Its Performance In Magnetic Field-Assisted Polishing Of Oxygen-Free Copper

Nano-precision Polishing of CVD SiC Using MCF (magnetic Compound Fluid) Slurry

Effect of the Components of Magnetic Compound Fluid (MCF) Slurry on Polishing Characteristics in Aspheric-Surface Finishing with the Doughnut-Shaped MCF Tool

Improving the Dispersion Stability and Chemical Mechanical Polishing Performance of CeO2 Slurries

Enhanced Sedimentation Stability of Carbonyl Iron Powders with Hydrophilic Siloxane Polymer Coatings in Ethanol

Effect of Ionic Surfactants on Shallow Trench Isolation for Chemical Mechanical Polishing Using Ceria-Based Slurries

A special electrostatic self-assembly structure of colloidal silica: Improving Chemical Mechanical Polishing performance

Carbonyl Iron Particles' Enhanced Coating Effect Improves Magnetorheological Fluid's Dispersion Stability

Enhancing Ceria Slurry Performance for Shallow Trench Isolation Chemical Mechanical Polishing Through Non-Ionic Surfactant Addition

Study on heterogeneous Fenton reaction parameters for polishing single-crystal SiC using magnetorheological elastomers polishing pads

Large-Area Preparation of a Robust Superamphiphobic Coating for Chemical Mechanical Polishing Application

Optimization of polishing fluid composition for single crystal silicon carbide by ultrasonic assisted chemical-mechanical polishing

Fundamental Investigation on Nano-Precision Surface Finishing of Electroless Ni–P-plated STAVAX Steel Using Magnetic Compound Fluid Slurry