Abstract:Summary This paper revised the electromagnetic fields induced by a horizontal electric dipole (HED) on the surface of a horizontal layered earth with azimuthal anisotropy. We estimate the far-field distance (FFD) of a homogeneous half-space with azimuthally anisotropy through numerical tests. We found that the FFD is linear with the skin depth if the coefficient of anisotropy is a constant. We also found the influence of anisotropy on the FFD is stronger along the strike than perpendicular to the strike and the value of the FFD is much larger along the strike than perpendicular to the strike. Therefore, before inverting Controlled Source Audio-Magneto Telluric (CSAMT) data, near-field effects must be carefully corrected. In this paper, we suggest to use far-field approximations to perform the near-field correction. discussed. Generally speaking, in the near-field (separation between the transmitter and receiver less than 3 skin depth), the H- field decays at r -2 , becomes saturated and no longer varies as a function of frequency or resistivity. The E-field still remains a function of resistivity, decays at r -3 , but is independent of frequency. It is in this near-field zone that depth of investigation becomes independent of frequency and dependent upon array geometry (see Zonge and Hughes, 1991). Routh and Oldenburg (1996) developed an inverse algorithm to recover a 1D conductivity structure of the Earth from CSAMT data without applying any correction to the data before the inversion. The results from inversion were compared with the inversion of near-field corrected data using an MT inversion algorithm, and show both of synthetic and field data had significant differences in the conductivity models. Therefore they suggested that it is prudent to carry out complete inversion as opposed to inverting near-field corrected data. Moreover, they did not focus on this problem in anisotropy media. Li and Pedersen (1991) deduced CSAMT responses of a layered earth with azimuthal anisotropy. However, they did not make further investigation of the near-field effect. This paper studies the near-field effect of an azimuthally anisotropic half-space, which is in hope of understanding the distortion of the far-field distance (FFD) caused by azimuthal anisotropy and performing CSAMT in such circumstances. Theory Assuming a layered earth consists of N azimuthally anisotropic layers. The XY-plane parallels to the ground surface, and the X axis towards the strike direction. The Z axis is vertical, and Z equals to zero on the ground surface. In the m-th layer, conductivity tensor has the form:

On the Use of Different Sources for Controlled Source Radiomagnetotellurics

Use of Subharmonics of Base Frequencies in the CSRMT Method with Loop Sources

Preliminary Understanding of Near-Field Effect of CSAMT in Electric Azimuthally Anisotropic Half-Space

Comparison between Different Apparent Resistivity Definitions of CSAMT

Improved controlled source audio‐frequency magnetotelluric method apparent resistivity pseudo‐sections based on the frequency and frequency–spatial gradients of electromagnetic fields

Multi-station Superposition for Magnetotelluric Signal

Two-dimensional Inversion of CSAMT Data and Three-Dimensional Geological Mapping for Groundwater Exploration in Tongkeng Area, Hunan Province, China

Understanding of near‐field effect for CSAMT in electric azimuthally anisotropic half‐space

Comparisons of the Magnetotelluric experimental results by Multi‐site remote reference and Multi‐site superposition

3D CSAMT modelling in anisotropic media using edge-based finite-element method

An Improved Differential Evolution Optimization-Based Source Reconstruction Method by Employing Near-field Scanning

The comparative analysis of the Ex and Hz fields sensitivity generated by electric dipole sources

Subsurface Conductivity Mapping Using Controlled Source Electromagnetic Method

Comparison of Stable Maximum Likelihood Estimator with Traditional Robust Estimator in Magnetotelluric Impedance Estimation

Imposing Active Sources During High-Frequency Passive Surface-Wave Measurement

Far-Field Directional Source Signature Acquisition, Processing, and Analysis: Taking a Janus–Helmholtz Transducer as an Example

Sensitivity Study of Three-Dimensional Marine Controlled-Source Electromagnetic Method

An Evaluation of Robust Remote Reference and Parametric Magnetotelluric Transfer Function Estimation.

Response characteristics of 3D tensor CSAMT in axis anisotropic media

Towards probing Earth’s upper mantle with daily magnetic field variations: exploring a physics-based parametrization of the source

Determination of the V S profile at a "noisy" industrial site via active and passive data: the critical role of Love waves and the opportunities of multi-component group velocity analysis