Abstract:In this work, we present a facile and scalable method to prepare Co3O4/RGO nanoparticles with superior microstructure by solvothermal and subsequent calcination. The Co3O4/RGO nanoparticles obtained at 550 °C demonstrated a high reversible capacity of 1191.9 mAh g−1 with capacity retention ratios of 98.9 % after 100 cycles at 0.5 A g−1. The facile synthesis method of Co3O4/RGO nanoparticles would offer possibilities for the development of high‐performance anode material for LIBs. A potential anode material for lithium‐ion batteries (LIBs), Co3O4 has been widely considered by many scholars because of its excellent properties in terms of electrochemical characteristics and theoretical specific capacity. However, according to the existing research results, we found that the improvement of the electrochemical performance of Co3O4 has encountered a bottleneck because its intrinsic conductivity is not high enough, and more importantly, the volume expansion is too significant during the charge and discharge process, which leads to the material structure breaking. Therefore, this paper proposes a simple and scalable solvothermal and subsequent calcination method to prepare Co3O4 and reduced graphene oxide (RGO) composite nanoparticles with superior microstructures, and their morphological and electrochemical properties were investigated at different calcination temperatures. As a high‐performance anode material for lithium‐ion batteries, the Co3O4/RGO nanoparticles obtained at 550 °C exhibited terrific initial discharge capacity of 1714.2 mAh g−1, the reversible specific capacity of 1191.9 mAh g−1 with quality coulombic efficiency 98.17 % at 0.5 A g−1 after 100 cycles and extraordinary rate performance (907.6 mAh g−1 with a coulombic efficiency of 99.2 % at 2 A g−1). The facile synthesis method and excellent findings have led to better application prospects for Co3O4/RGO nanoparticles.

Nanoflower Architecture NiGa 2 O 4 with a Spinel Structure Modified by 2D Layered RGO for Enhanced Li-Ion Battery Anode Performance

A Reduced Graphene Oxide/sno2/polyaniline Nanocomposite for the Anode Material of Li-ion Batteries

One-pot hydrothermal synthesis of N-rGO supported Fe2O3 nanoparticles as a superior anode material for lithium-ion batteries

TiO2/NiO/reduced Graphene Oxide Nanocomposites As Anode Materials for High-Performance Lithium Ion Batteries

Co3O4/RGO Nanoparticles Fabricated by Facile Solvothermal Method as an Anode Material for High‐Performance Lithium‐Ion Batteries

Ternary perovskite nickel titanate/reduced graphene oxide nano-composite with improved lithium storage properties

Preparation, Lithium Storage Performance and Thermal Stability of Nickel‐Rich Layered LiNi0.815Co0.15Al0.035O2/RGO Composites

Self-assembly construction of NiO@NiFe2O4/rGO architecture for stable and ultra-long life lithium-ion storage

Hollow sea urchin-like microspheres of the dual transition metal oxides NiO/Co 3 O 4 immobilized on rGO enhance lithium-ion battery cycling and rate performance

Nanocomposites of Hematite (Α-Fe2o3) Nanospindles with Crumpled Reduced Graphene Oxide Nanosheets As High-Performance Anode Material for Lithium-Ion Batteries

Ultra-Fine Maghemite (γ-Fe2O3) Nanoparticles Anchored on 3D Reduced Graphene Oxide Aerogels for Advanced Lithium-Ion Battery Anodes

Optimization of NiFe2O4/rGO Composite Electrode for Lithium-Ion Batteries

NiO/Graphene Nanocomposite As Anode Material for Lithium–Ion Batteries

Rational engineering NiMoO4 nanosheets or Mn3O4 nanowires on Fe2O3 microdiscs as novel hierarchical anodes for high-performance lithium-ion batteries

Nanostructured T-Nb2O5-based composite with reduced graphene oxide for improved performance lithium-ion battery anode

Excellent lithium storage performance of Ni-MOFs/GO composite as anode in lithium ion battery

1D Ti-based H2Ti12O25 nanorod @2D RGO sheet composite as high-power anode for long-life Li-ion battery

Facile Hydrothermal Fabrication of an α-Ni(OH) 2 /N-Doped Reduced Graphene Oxide Nanohybrid as a High-Performance Anode Material for Lithium-Ion Batteries

Design of Nb2O5@rGO composites to optimize the lithium-ion storage performance

Dealloyed Porous NiFe2O4/NiO with Dual-Network Structure as High-Performance Anodes for Lithium-Ion Batteries

Hydrothermally Enhanced MnO/reduced Graphite Oxide Composite Anode Materials for High Performance Lithium-Ion Batteries