High-Strength, Fast Self-Healing, Aging-Insensitive Elastomers with Shape Memory Effect

Wenpeng Zhao,Yaoyao Liu,Zixiang Zhang,Xianqi Feng,Hong Xu,Jun Xu,Jian Hu,Shouguo Wang,Yumin Wu,Shouke Yan
DOI: https://doi.org/10.1021/acsami.0c09045
2020-07-09
Abstract:Self-healing materials, which can autonomously repair damages like living organisms, have undergone extensive development in the last decades. The bottleneck problems for their practical applications are long healing time, inferior mechanical strength, and aging sensitivity. Here, a new class of polymeric materials rationally grafted with oligo poly(ethylene glycol) is reported. The network based on the formation of multiple weak hydrogen bonds endows the elastomers with good comprehensive performances including high stretchability (725%), high strength (4.20 MPa), and fast self-healing process (40 s). Benefiting from characteristic multiple weak hydrogen bond interactions, the fractured elastomers maintain high healing efficiency even after aging for 192 h, showing an unusual aging insensitivity. A Sudoku structural device based on the developed elastomer shows shape memory effect, providing a new avenue for fabricating novel smart devices with complicated shapes.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c09045?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c09045</a>.Real status of 2-methoxyethyl acrylate (MEA) solution and mPEG-arylate solution. Real pictures of freshly prepared gels and elastomers, UV–vis spectra of PA-325 sample before and after swelling in water, FTIR spectra of PACMO, PA-300, and P(mPEG-acrylate), XPS spectra of C 1s for PA-325, SEM image of healed top interfaces, stress–strain curves of healed samples with different aging times, and repaired sample of PA-325 (cut off by a blade and healed at −5 °C for 2 h) can lift a load of 500 g without failure (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c09045/suppl_file/am0c09045_si_001.pdf">PDF</a>)Movie S1 (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c09045/suppl_file/am0c09045_si_002.mp4">MP4</a>)Movie S2 (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c09045/suppl_file/am0c09045_si_003.mp4">MP4</a>)Movie S3 (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c09045/suppl_file/am0c09045_si_004.mp4">MP4</a>)This article has not yet been cited by other publications.
materials science, multidisciplinary,nanoscience & nanotechnology
What problem does this paper attempt to address?
The paper attempts to address the issues encountered in the practical application of self-healing materials, mainly including long healing time, poor mechanical strength, and sensitivity to aging. The research team developed a new type of polymer material by reasonably grafting oligo polyethylene glycol (oligo PEG) onto acrylate, forming an elastomer based on a multiple weak hydrogen bond network structure. This material not only possesses high stretchability (725%), high strength (4.20 MPa), and rapid self-healing ability (40 seconds), but also maintains efficient healing performance even after prolonged aging (192 hours). In addition, the elastomer also exhibits shape memory effects, providing new avenues for the manufacture of smart devices with complex shapes. The study shows that by adjusting the ratio of monomers, the glass transition temperature and mechanical strength can be tuned, but an excess of amide carbonyl groups will lead to a decrease in self-healing ability. The rapid hydrogen bond recombination of this material endows it with real-time self-healing capability and allows it to maintain efficient healing even after long periods of placement (such as 192 hours), making it suitable for the design and manufacture of new smart devices like electronic skin.