Abstract:Spectral imaging is an emerging tool for a variety of scientific and engineering applications because of the additional information it provides about the nature of the materials being imaged. Snapshot spectral imaging has great advantages over traditional imaging systems in the acquisition of data. Some examples of such systems are the computed tomographic imaging spectrometer (CTIS) and the coded aperture snapshot spectral imager (CASSI). Both instruments are based on computational imaging, which do not directly capture the image of the target. Another class of snapshot spectral imaging systems provides all spatial-spectral information on a single or multiple CCD image sensors with a one-to-one correspondence between datacube voxels and detector pixels. Integral field spectrometry with faceted mirrors (IFS-M), integral field spectrometry with coherent fiber bundles (IFS-F), and image mapping spectrometer (IMS) are all typical examples. In IFS-M, the two-dimensional field of interest is optically divided into small samples that are re-imaged at the entrance plane of the spectrograph. It has the characteristics of low spatial resolution. IFS-F uses a reformatter fiber optics to map a 2D image to a linear array that serves as an input slit to an imaging spectrometer. Its drawback with the use of fibers is that it is quite difficult to be coupled with light efficiently. So part of the light energy will be lost when entering the fiber. The micromirror array is IMS's core component. It consists of a series of long and narrow mirrors and split and map the image onto the detector image plane. The reflective nature of the micromirror array and use of prisms for spectral dispersion provide the system with a high light collection capacity. In addition, its spatial resolution is higher than IFS-M. A designed snapshot spectral camera based on IMS is given in this chapter. The system with operation wavelength range from 400 nm to 900 nm, focal ratio of 15, and spectral resolution of 14.29 nm is designed, and the design results are analyzed and evaluated. It achieves a good imaging quality. It is expected to be applied to remote sensing.

Snapshot multispectral imaging using a filter array

Single-pixel Multispectral Imaging Based on Macropixel Segmentation Method

Snapshot Imaging Spectrometer Based on Pixel-Level Filter Array (PFA)

Color Router-based Long-wave Infrared Multispectral Imaging

Fast Multispectral Imaging by Spatial Pixel-Binning and Spectral Unmixing

Multispectral imaging via nanostructured random broadband filtering

Joint optimization of multispectral filter arrays and demosaicking for pathological images

Design of a Dual-Mode Multispectral Filter Array

Hybrid-resolution multispectral imaging using color filter array

A light-efficient and versatile multiplexing method for snapshot spectral imaging

Ultrabroadband, high color purity multispectral color filter arrays

Design Of A Snapshot Spectral Camera Based On Micromirror Arrays

Grayscale-to-color: Single-step fabrication of bespoke multispectral filter arrays

Flexible long-wave infrared snapshot multispectral imaging with a pixel-level spectral filter array

Snapshot Multispectral Imaging Using a Diffractive Optical Network

High Light Efficiency Snapshot Spectral Imaging Via Spatial Multiplexing and Spectral Mixing.

Snapshot Hyperspectral Imaging Via Spectral Basis Multiplexing in Fourier Domain

Optimal Spectral Sensitivity of Multispectral Filter Array for Pathological Images

Snapshot Compressive ToF+Spectral Imaging via Optimized Color-Coded Apertures