Abstract:Due to the steric hindrance effects in combination with stability of the tertiary benzylic alpha-methylstyryl radical, there is a dynamic equilibrium between the monomer alpha-methylstyrene (AMS) and its polymer (PAMS) when the temperature is greater than 61 degrees C (the ceiling polymerization temperature). Based on this unique feature, a novel strategy to prepare copolymers of AMS having liable bonds as potential macromolecular free radical initiators for synthesizing block and graft copolymers has been successfully developed in our laboratory. By conventional free radical polymerization, a series of AMS copolymers, including copolymers with (meth)acrylate, acrylic acid, styrene and maleic anhydride were synthesized. Typically, with the increasing of AMS fraction in monomer feed, the rate of copolymerization was significantly retarded and the molecular weight of the copolymers was reduced. However, the copolymer yield could be as high as 90% (w) with the increased addition of initiator, up to 4% (w), and the molar fraction of AMS structural unit in AMS copolymers could be up to 25% (mol%). It has been demonstrated that the copolymers containing AMS structural units are efficient free radical initiators when the temperature is greater than 80 degrees C (much better higher than 90 degrees C). These copolymers could be exploited as macroinitiator in preparing block copolymers and core-shell polymer particles by bulk, solution and emulsion polymerization processes. In addition, the experimental results demonstrated that the molecular weight of copolymer products prepared with AMS copolymers as macromolecular initiators increased steadily with the monomer conversion. Though the polymerization initiated by AMS copolymers was not a well-controlled living system yet, it showed some characteristics of living polymerization. The ESR spectrum presented direct evidence of the generation of carbon centered radicals in the products of copolymer of AMS with glycidyl methacrylate (PAG) heated with N-t-butyl-alpha-phenylnitrone at 90 degrees C in toluene. Besides initiating the polymerization of vinyl monomer to prepare diblock copolymer, the AMS copolymers offered a practical pathway to synthesize grafting polymers in melting state. For example, with the addition of PAG in the PP/Nylon melten blending, it has been demonstrated a significant in situ compatibilization effect and the formation of graft polymer of PAG and PP. Furthermore, the AMS copolymers could also be used to modify MWCNT by free radical grafting onto mechanism. Instead of competing with the other existing controlled free radical polymerization technologies, the AMS copolymer method, with competitive cost and no small molecular residues, offers an alternative tool for polymer chemists to develop block copolymers on an industrial scale for some applications, such as dispersant and compatibilizer.

Synthesis and characterization of PVDF macroinitiators with well-defined functional end-groups

One‐step Synthesis of Hyperbranched Polyethylene Macroinitiator and Its Block Copolymers with Methyl Methacrylate or Styrene Via ATRP

Synthesis and Characterization of PE-b-POEGMA Copolymers Prepared by Linear/Hyperbranched Telechelic Polyethylene-Initiated ATRP of Oligo(ethylene glycol) Methacrylates

Ab Initio Emulsion RAFT Polymerization of Vinylidene Chloride Mediated by Amphiphilic Macro‐raft Agents

Functional and Surface-Active Membranes from Poly(vinylidene Fluoride)-Graft-poly(acrylic Acid) Prepared Via RAFT-mediated Graft Copolymerization.

A New Strategy of Post-Polymerization Modification to Prepare Functionalized Poly(disubstituted Acetylenes)

Synthesis and Characterization of ABA-Type Triblock Copolymers Using Novel Bifunctional PS, PMMA, and PCL Macroinitiators Bearing p-xylene-bis(2-mercaptoethyloxy) Core

Photo-induced Synthesis of PVC Macroinitiators and Preparation of Amphiphilic Graft Copolymers

Synthesis of Functional Poly(disubstituted Acetylene)s Through the Post-Polymerization Modification Route.

Janus Polymerization: A One‐Shot Approach Towards Amphiphilic Multiblock Poly(ester‐acetal)s Directly from 1,3‐dioxolane with Ε‐caprolactone

A Novel Post-Polymerization Modification Route to Functional Poly(Disubstituted Acetylenes) Through Phenol-yne Click Reaction

A Novel Macroinitiator Based on the Copolymer of Α-Methylstyrene Synthesis and Its Application in Preparing Block and Graft Polymers

Marriage of Ring-Opening Metathesis Polymerization and Thiol-Maleimide Chemistries: Direct Polymerization of Prefunctionalized Monomers or Postpolymerization Modification?

Synthesis and Characterization of a Novel Kind of Water-Soluble Macromolecular Photoinitiators and Their Application for the Preparation of Water-Soluble Branched Polymers

One-Step Method for Synthesis of PDMS-Based Macroazoinitiators and Block Copolymers from the Initiators

Investigation of the Conditions for the Synthesis of Poly(3,4-ethylenedioxythiophene) ATRP Macroinitiator

Versatile Initiators For Macromonomer Syntheses Of Acrylates, Methacrylates, And Styrene By Atom Transfer Radical Polymerization

Synthesis of Block Copolymers by Macroinitiator Method

Metal‐Free, Light‐Catalyzed ATRP For the Synthesis of Functional PVDF‐Based Block Copolymers and Their Characterization

Synthesis of Styrenic-Terminated Methacrylate Macromonomers by Nitroanion-Initiated Living Anionic Polymerization

Facile Approach to Functionalizing Polymers with Specific Chemical Groups by an Ozone Treatment: Preparation of Crosslinkable Poly(vinylidene Fluoride) Possessing Benzoxazine Pendent Groups