Abstract:<h3 class="a-plus-plus">Abstract</h3> In this work, a series of rationally designed hybrid membranes composed of poly(vinylidene fluoride) (PVDF) as polymer matrix and silica nanoparticles (SiO2) as inorganic fillers are prepared by combining slurry coating method and phase inversion method. The effects of the added SiO2 nanoparticles on the porosity, electrolyte wettability, thermal stability, and ionic conductivity of PVDF/SiO2 hybrid membranes are investigated systematically. Compared to the commercial polypropylene (PP) membrane, PVDF/SiO2 hybrid membranes present enhanced physical and electrochemical performance. Particularly, the incorporation of 5 wt.% SiO2 to PVDF polymer matrix (PVDF5 hybrid membrane) shows the highest ionic conductivity of 1 × 10−3 S cm−1 at 25 °C among all the samples. The electrochemical tests demonstrate that the LiNi0.8Co0.1Mn0.1O2/Li coin cell assembled with PVDF5 hybrid membrane exhibits high reversible discharge capacity (179 mAh g−1 at 0.05 C), excellent cyclic stability (169 mAh g−1 after 100 cycles at 0.1 C), and superior rate performance, which are much better than other counterparts and PP separator. Moreover, as for the large capacity battery application, 1.1 Ah LiNi0.8Co0.1Mn0.1O2/graphite pouch cell with PVDF5 hybrid membrane can deliver a high discharge capacity of 992 mAh and good Coulombic efficiency of 99.5%. Evidently, the optimized PVDF/SiO2 hybrid membrane will be a very promising alternative to the commercial PP separator for advanced lithium-ion batteries.

Facile fabrication of flexible electrodes with poly(vinylidene fluoride)/Si3N4 composite separator prepared by electrospinning for sodium‐ion batteries

Electrolyte-philic and thermal-resistant polyimide separator enhances the performance of flexible silicon/carbon nanofibers for lithium-ion batteries

A bifunctional double-layer Fe 3 O 4 -Polyvinylidene fluoride(PVDF)/PVDF separator with enhanced thermal stability for Li-S batteries

An Efficient, Scalable Route to Robust PVDF-co-HFP/SiO2 Separator for Long-Cycle Lithium Ion Batteries

Electrospun Nanofiber Surface-Modified Polyethylene Separator for Enhanced Cycling Stability and Low-Temperature Performance of Sodium-Ion Batteries

Flexible core-shell PAN/CNTs@PVDF-HFP/Uio-66-NH 2 hybrid nanofibers membrane for advanced lithium-ion batteries separator

An upgraded polymeric composite with interparticle chemical bonding microstructure toward lithium-ion battery separators with enhanced safety and electrochemical performances

Porous polymer composite separators with three-dimensional ion-selective nanochannels for high-performance Li–S batteries

Electrospun High-Thermal-Resistant Inorganic Composite Nonwoven as Lithium-Ion Battery Separator

A highly-stable separator from an instantly-reformed gel with direct post-solidation for long-cycle high-rate lithium ion batteries.

Sandwich-structured composite separators with an anisotropic pore architecture for highly safe Li-ion batteries

Electrospun nanofiber separator derived from nano-SiO2-modified polyimide with superior mechanical flexibility for high-performance lithium-ion battery

Flexible and heat-resistant polyphenylene sulfide ultrafine fiber hybrid separators for high-safety lithium-ion batteries

In-situ extracted poly(acrylic acid) contributing to electrospun nanofiber separators with precisely tuned pore structures for ultra-stable lithium-sulfur batteries

Composite MnCO3/PVDF-HFP Separator Towards High-Performance Lithium-Ion Batteries

Electrospun of polyvinyl alcohol composite hydrogel nanofibers prepared by in-situ polymerization: A novel approach to fabricate hydrogel nanofiber membrane for lithium-ion batteries

Safe, Facile, and Straightforward Fabrication of Poly(N‐vinyl imidazole)/Polyacrylonitrile Nanofiber Modified Separator as Efficient Polysulfide Barrier Toward Durable Lithium–Sulfur Batteries

Enhanced Mechanical Behavior and Electrochemical Performance of Composite Separator by Constructing Crosslinked Polymer Electrolyte Networks on Polyphenylene Sulfide Nonwoven Surface

Synthesis and electrochemical performance of poly(vinylidene fluoride)/SiO2 hybrid membrane for lithium-ion batteries

Poly(Vinylidene Fluoride) Separators with Dual-Asymmetric Structure for High-Performance Lithium Ion Batteries

A robust electrospun separator modified with in situ grown metal-organic frameworks for lithium-sulfur batteries