Abstract:Accurate measurement and monitoring of respiration is vital in patients affected by severe acute respiratory syndrome coronavirus – 2 (SARS-CoV-2). Patients with severe chronic diseases and pneumonia need continuous respiration monitoring and oxygenation support. Existing respiratory sensing techniques require direct contact with the human body along with expensive and heavy Holter monitors for continuous real-time monitoring. In this work, we propose a low-cost, non-invasive and reliable paper-based wearable screen printed sensor for human respiration monitoring as an effective alternative of existing sensing systems. The proposed sensor was fabricated using traditional screen printing of multi-walled carbon nanotubes (MWCNTs) and polydimethylsiloxane (PDMS) composite based interdigitated electrodes on paper substrate. The paper substrate was used as humidity sensing material of the sensor. The hygroscopic nature of paper during inhalation and exhalation causes a change in dielectric constant, which in turn changes the capacitance of the sensor. The composite interdigitated electrode configuration exhibited better response times with a rise time of 1.178s being recorded during exhalation and fall time of 0.88s during inhalation periods. The respiration rate of sensor was successfully examined under various breathing conditions such as normal breathing, deep breathing, workout, oral breathing, nasal breathing, fast breathing and slow breathing by employing it in a wearable mask, a mandatory wearable product during the current COVID-19 pandemic situation.Thus, the above proposed sensor may hold tremendous potential in wearable/flexible healthcare technology with good sensitivity, stability, biodegradability and flexibility at this time of need.

Janus Wettable Mask with Integrated Ratiometric Fluorescent Probe for Comfortable Exhaled H 2 S Gas Sensing

Sodium Alginate/MXene-Based Flexible Humidity Sensors with High-Humidity Durability and Application Potentials in Breath Monitoring and Non-Contact Human–Machine Interfaces

P-N Heterojunction formation: Metal Sulfide@Metal Oxide Chemiresistor for ppb H 2 S Detection from Exhaled Breath and Food Spoilage at Flexible Room Temperature

Fast Response Room Temperature Amperometric Gas Sensors with Modified Fe–N–C Electrodes for Ppb-Level H2S Detection

Target-Driven Z-Scheme Heterojunction Formation for ppb H 2 S Detection from Exhaled Breath at Room Temperature

An Affordable Amperometric Gas Sensor Based on Polyvinylidene Fluoride Solid-State Electrolyte for Highly Selective Detection of Ppm-Level H2 at Room Temperature

Detection of PPB-Level H 2 S Concentrations in Exhaled Breath Using Au Nanosheet Sensors with Small Variability, High Selectivity, and Long-Term Stability

Liquid Metal-Based Epidermal Flexible Sensor for Wireless Breath Monitoring and Diagnosis Enabled by Highly Sensitive SnS2 Nanosheets

Liquid Metal-Based Epidermal Flexible Sensor for Wireless Breath Monitoring and Diagnosis Enabled by Highly Sensitive SnS 2 Nanosheets

Visualization of exhaled hydrogen sulphide on test paper with an ultrasensitive and time-gated luminescent probe

Porous PDMS-ZnO Wearable Gas Sensor for Acetone Biomarker Detection and Breath Analysis

Ultrasensitive Bio-H2S Gas Sensor Based on Cu2O-MWCNT Heterostructures.

Face Mask Integrated with Flexible and Wearable Manganite Oxide Respiration Sensor

Fiber gas sensor-integrated smart face mask for room-temperature distinguishing of target gases

Flexible H<sub>2</sub>S sensors: Fabricated by growing NO<sub>2</sub>-UiO-66 on electrospun nanofibers for detecting ultralow concentration H<sub>2</sub>S

An ultra-sensitive optical H 2 S sensor based on thermal conversion combined with UV-DOAS: Dynamic detection from ppm to ppb level

Ultrasensitive Chemiresistive Gas Sensor Can Diagnose Asthma and Monitor Its Severity by Analyzing Its Biomarker H2S: an Experimental, Clinical, and Theoretical Study.

Polyaniline/Ti3C2Tx functionalized mask sensors for monitoring of CO2 and human respiration rate

Highly Sensitive and Selective NiO/WO 3 Composite Nanoparticles in Detecting H 2 S Biomarker of Halitosis

Flexible, Highly Sensitive Paper-Based Screen Printed MWCNT/PDMS Composite Breath Sensor for Human Respiration Monitoring

A wearable mask sensor based on polyaniline/CNT nanocomposites for monitoring ammonia gas and human breathing